Instruction/ maintenance manual of the product 5000 HP (Hewlett-Packard)
Go to page of 202
Copyright© 1998 He wlett-Packard Co. Printed in USA Manual Part No. C4110-90901 *C4110-90901* *C4110-90901* C4110-90901 HP LaserJet 5000, 5000 N, and 5000 GN Printers User's Guide HP LaserJet 50.
HP LaserJet 5000, 5000 N, and 5000 GN Pr inters User's Guide.
Hewlett-P ackard Compan y 11311 Chinden Boule v ard Boise, Idaho 83714 © Cop yright Hewlett-P ackard Company 1998 All Rights Reser ved. Reproduction, adaptation, or translation without prior written permission is prohibited, e xcept as allowed under the cop yright laws.
EN 3 T ake a look at all that HP Suppor t has to offer! Thank you f or y our purchase. Along with your product, y ou receiv e a v ariety of suppor t ser vices from Hewlett-P ackard and our suppor t par tners that are designed to give y o u the results y ou need, quick ly and prof essionally .
4 EN HP Service Agreem ents: Call (1) (800) 446-0522 (U.S .) or (1) (800) 268-1221 (Canada). HP FIRST: HP FIRST F ax will deliver detailed troubleshooting information on common software and troubleshooting tips for y our HP product. Call from any touch-tone phone and request up to three documents per call.
EN 5 Customer Support Options W orldwide The ser vice and suppor t chapter of this user’ s guide contains worldwide sales and ser vice addresses and phone numbers f or countries not listed here. Customer Suppor t an d Product Repair Assistance for the U.
6 EN.
EN Contents 7 Contents 1 Printer Basics Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Printer Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Printer Information . . . . .
8 Contents EN Advanced Printing Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Using Features in the Printer Driver . . . . . . . . . . . . . . . . . . 56 Customizing Tray 1 Operation . . . . . . . . . . . . . . . . . . . . . . .
EN Contents 9 A Specifications Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 Paper Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2 Supported Sizes and Weights of Paper .
10 Contents EN E Regulatory Information FCC Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-1 Environmental Product Stewardship . . . . . . . . . . . . . . . . . . . . E-2 Protecting the Environment . . . . . . . . .
EN Chapter 1: Printer Basics 1 1 Printer Basics Overview Congra tulations on your purchase of an HP LaserJet 5000 ser ies printer . If y ou hav e not done so, see the getting started guide provided with the printer f or setup instructions. Now that the printer is set up and ready to use, tak e a f ew moments to get to know the pr inter .
2 Chapter 1: Printer Basics EN Printer Features and Benefits Many of the printer’ s features and benefits are outlined belo w . Specific chapters contain more inf ormation on each feature. See this guide’ s index or contents to locate this inf or mation.
EN Chapter 1: Printer Basics 3 Expandability Ability to grow with the printing needs of workgroups: • 3 built in DIMM slots for memory expansion. • Available flash and memory DIMM cards. • Up to 100 MB maximum memory capability. • 2 EIO interface slots for I/O cards and disk cards.
4 Chapter 1: Printer Basics EN Printer Inf ormation This printer can be purchased in three configurations, as described below . Configurations HP LaserJet 5000 printer The HP LaserJet 5000 printer is a 16 ppm laser pr inter that comes standard with a 100-sheet multi-purpose T ra y 1, a 250-sheet T r a y 2, and 4 MB of memory .
EN Chapter 1: Printer Basics 5 A v ariety of configurations are possible with the optional tr a ys: Figure 1 Optional Tray Configurations Note A duple x er can be added to any of these configurations and is placed under T ra y 2.
6 Chapter 1: Printer Basics EN Printer P ar ts and Locations Figure 2 Printer Parts (front and rear views) Control panel and display Paper stop Top output bin Tray 1 (100-sheet) Tray 2 (250-sheet) Pap.
EN Chapter 1: Printer Basics 7 Accessories and Supplies Y ou can increase the capabilities of the printer with optional accessories and supplies. Note Use accessories and supplies specifically designed for the printer to ensure optimum perf ormance. The printer suppor ts two enhanced input/output (EIO) cards.
8 Chapter 1: Printer Basics EN Ordering Inf ormation Use only accessories specifically designed for this printer . T o order an accessor y , contact an HP-author ized service or suppor t provider . (See the HP Suppor t pages at the front of this user’ s guide.
EN Chapter 1: Printer Basics 9 Memory, Fonts, and Mass Storage Dual In-line Memory Module (DIMM) Boosts the ability of the printer to handle large print jobs (maximum 100 MB with HP brand DIMMs): EDO .
10 Chapter 1: Printer Basics EN Documentation HP LaserJet Printer F amily P a per Specification Guide A guide to using paper and other print media with HP LaserJet printers. 5010-6394 PCL 5/PJL T echnical Ref erence Documentation Pa c k a g e A guide to using printer commands with HP LaserJet pr inters.
EN Chapter 1: Printer Basics 11 Contr ol P anel La y out The printer’ s control panel consists of the f ollowing: Figure 4 Control Panel Layout Contr ol P anel Lights Light Indication Ready The printer is ready to print. Data The pr inter is processing inf ormation.
12 Chapter 1: Printer Basics EN Contr ol P a nel K eys Key Function [Go] • Places the printer either online or offline. • Prints any data residing in the printer’ s buff er . • Allows the printer to resume printing after being offline. Clears most printer messages and places the printer online.
EN Chapter 1: Printer Basics 13 Contr ol P anel Menus F or a complete list of control panel items and possib le v a lues, see page B-1. Press [Menu] for access to all control panel men us. When additional tra ys or other accessor ies are installed in the printer , new menu items automatically appear .
14 Chapter 1: Printer Basics EN Printer Software The printer comes with helpful software on a compact disc. See the getting star ted guide for installation instructions. Note Check the ReadMe file pro vided on the compact disc f or additional software included and suppor ted languages.
EN Chapter 1: Printer Basics 15 Printer Drivers Printer dr iv ers access the printer features and allo w the computer to communicate with the printer (via a printer language). Note Check the ReadMe file pro vided on the compact disc f or additional software included and supported languages.
16 Chapter 1: Printer Basics EN Additional Drivers Y ou can obtain the f ollowing printer dr ivers b y downloading them from the Inter net, or by requesting them from an HP-authorized ser vice or suppor t provider . (See the HP Suppor t pages at the front of this user’ s guide.
EN Chapter 1: Printer Basics 17 Software f or Windows Use the T ypical Install or Custom Install option to install the HP software . (This includes se v eral printer drivers.
18 Chapter 1: Printer Basics EN Choose the Right Printer Driver for Your Needs Choose a printer dr iver based on the w ay y ou use the printer . • Use the PCL 6 driver to take full advantage of the printer’s features. Unless backward compatibility with previous PCL drivers or older printers is necessary, the PCL 6 driver is recommended.
EN Chapter 1: Printer Basics 19 HP ToolBox Access HP T oolBo x from a printer icon on the desktop in Windows 3.1x or on the Windows 95 and Windows NT 4.0 T askbar . HP T oolBo x provides one-step access to the current status of the printer and a list of all av ailable f eatures, including the f ollowing: • printer status • “How Do I.
20 Chapter 1: Printer Basics EN HP JetSend Communications Technology HP JetSend can be installed through an installer on the compact disc. HP JetSend is a new technolog y from Hewlett-P ackard that allows netw ork devices to comm unicate with each other directly .
EN Chapter 1: Printer Basics 21 Software f or Macintosh Computers PostScript Printer Description Files (PPDs) PPDs, in combination with the LaserWriter driver , access the printer f eatures and allow the computer to comm unicate with the printer . An installation progra m f or the PPDs and other software is pro vided on the compact disc.
22 Chapter 1: Printer Basics EN Software f or Netw orks HP JetAdmin HP JetAdmin should be installed only on the network administrator’ s computer . HP JetAdmin can be accessed by clic king the Start button (point to Settings , and then clic k Control P anel ) in Windows 95 and Windows NT 4.
EN Chapter 1: Printer Basics 23 HP Web JetAdmin This web-based HP JetAdmin softw are should be installed on a web ser v er . The f ollowing systems are supported: • Windows NT • HP-UX* • OS/2* *The software f or these systems is not included on the compact disc with the printer , b ut is av ailable from the Inter net.
24 Chapter 1: Printer Basics EN.
EN Chapter 2: Printing T asks 25 2 Printing T asks Overview This chapter presents basic printing tasks , such as: • Selecting the output bin. • Loading the trays. • Printing on both sides of paper with the optional duplexer. • Printing on special paper, such as letterhead and envelopes.
26 Chapter 2: Printing T asks EN Selecting the Output Bin The printer has two output locations: the rear output bin and the top output bin. T o use the top output bin, be sure the rear output bin is closed. T o use the rear output bin, open it. The f ollowing tab le shows the minimum and maximum siz es of paper suppor ted in the output bins.
EN Chapter 2: Printing T asks 27 Printing to the T op Output Bin The top output bin collects paper f ace-down, in correct order . The top output bin should be used f or most print jobs and is recommen.
28 Chapter 2: Printing T asks EN Printing to the Rear Output Bin The printer alwa ys prints to the rear output bin if it is open. P aper comes out of the printer face-up , with the last page on top . T o open the rear output bin, grasp the handle at the top of the bin and pull the bin down.
EN Chapter 2: Printing T asks 29 Adjust the Paper Stop F or printing stacks of large paper only , the paper stop on the top output bin pre v ents long paper from being pushed ov er the edge of the pr inter . 1 Push in the center of the paper stop to release it.
30 Chapter 2: Printing T asks EN Loading T ra y 1 Note T o av oid paper jams , do not load tra y s while the printer is pr inting. T r a y 1 is a multi-purpose tra y that holds a v ariety of paper , including up to 100 sheets of paper , 10 env elopes, or 20 inde x cards .
EN Chapter 2: Printing T asks 31 Loading T ra y 2/Optional 250-Sheet T ra y The f ollo wing instructions are for loading T ra y 2 or an optional 250-sheet paper tra y . Fo r suppor ted sizes of paper, see page A-4. Note T o av oid paper jams , do not load tra ys while the printer is pr inting.
32 Chapter 2: Printing T asks EN 5 Align the rear guide with the desired paper size . With the guide angled slightly tow ard the front of the tra y , inser t the two front tabs (A) into the appropriate holes. Push the guide upright, snapping the center tab (B) into place.
EN Chapter 2: Printing T asks 33 Loading the 500-Sheet T ra y (Optional) The f ollo wing instructions are for loading standard sizes in a 500-sheet tra y (optional). For suppor ted sizes of paper, see page A-5. T o load custom-sizes, see page 50. Note T o av oid paper jams , do not load tra ys while the printer is pr inting.
34 Chapter 2: Printing T asks EN 6a When loading a full stack of media, continue to step 6B . Otherwise, proceed to step 7. 6b Align the tension le v er up or do wn to match the symbol displa y ed in the tension indicator window . 7 T o prev ent jam s, rotate the dial in the tra y so the pr inter will read the correct size of paper .
EN Chapter 2: Printing T asks 35 Printing Both Sides of P aper (Optional Duplex er) The printer can automatically pr int on both sides of paper with an optional duple x printing accessor y (duplex er). This is called duple xing. T o order optional accessories, see page 8.
36 Chapter 2: Printing T asks EN Guidelines for Printing Both Sides of Paper Caution Do not print on both sides of labels, transparencies , en v elopes, vellum, or paper hea vier than 28 lb (105 g/m 2 ). Damage to the printer and paper jamming might result.
EN Chapter 2: Printing T asks 37 Separating the Printer from the Duplexer Bef ore you lift the printer , alwa ys separate the printer from the duple x er . 1 Slide the rear section of the duple x er awa y from the pr inter . 2 Lift the printer off the duplex er .
38 Chapter 2: Printing T asks EN Paper Orientation for Printing Both Sides of Paper The duple x er prints the second side of paper first, so paper such as letterhead, prepunched, and preprinted paper need to be or iented as shown in Figure 10.
EN Chapter 2: Printing T asks 39 Layout Options for Printing Both Sides of Paper The f our print or ientation options are shown belo w . These options can be selected from the printer dr iv er or from the printer’ s control panel (set BINDING from the P aper Handling Menu and ORIENTATION from the Pr inting Menu).
40 Chapter 2: Printing T asks EN Printing Special P aper Special paper includes letterhead, prepunched (including 3-hole punched), env elopes, labels, transparencies , full-bleed images, rotated paper , index cards , postcards , custom-size , and hea vy paper .
EN Chapter 2: Printing T asks 41 Paper Orientation Figure 12 Paper Orientation for Tray 1 • Load letter, A4, A5, Executive, and B5 paper with the side-to-be-printed facing up, and the top, short edge toward the right. • Load other sizes of paper with the side-to-be-printed facing up, and the top, short edge toward the printer.
42 Chapter 2: Printing T asks EN Printing En velopes Many types of en velopes can be printed from T ra y 1. (Up to 10 can be stack ed in the tray .) Printing performance depends on the construction of the env elope . Alwa ys test a fe w sample envelopes bef ore purchasing a large quantity .
EN Chapter 2: Printing T asks 43 Loading Envelopes in Tray 1 1 Open T ra y 1 and pull out the tray e xtension. If the en velopes are longer than 9 inches (229 mm), flip open the second tra y extension. 2 Open the rear output bin and pull out the tra y extension.
44 Chapter 2: Printing T asks EN Printing Labels Use only labels recommended f or use in laser printers. Multi-thickness labels and labels that do not stac k flat might print better rotated. T o print rotated paper, see page 47. Make sure that labels meet the specifications f or the input tra y you use (page A-9).
EN Chapter 2: Printing T asks 45 Do not: Caution F ailure to follo w these instructions can damage the printer . • Do not load the trays to capacity because labels are heavier than paper. • Do not use labels that are separating from the backing sheet, wrinkled, or damaged in any way.
46 Chapter 2: Printing T asks EN Printing T ransparencies Use only transparencies recommended f or use in laser pr inters. F or transparency specifications, see page A-9. • Load transparencies in Tray 1 with the side-to-be printed facing up and the top edge toward the right.
EN Chapter 2: Printing T asks 47 Printing Rotated P aper The printer can pr int letter , A4, A5, Executiv e, and B5 (JIS) in a rotated orientation (shor t-edge first) from T ra y 1. The pr inter can print letter and A4 in a rotated or ientation from a 500-sheet tra y .
48 Chapter 2: Printing T asks EN 500-Sheet T ray: 1 Rotate the dial inside the front of the tra y to the correct paper size. 2 F rom the P aper Handling Menu in the printer’ s control panel, select LTR-R or A4-R as the paper size . 3 Load paper with the side-to-be printed facing do wn, and the top , shor t-edge toward the front of the tr ay .
EN Chapter 2: Printing T asks 49 Printing Full-Bleed Images Full-bleed images e xtend from edge to edge of the page. T o achie ve this eff ect, use larger paper , then trim its edges to the desired size. Caution Ne v er print directly to the edge of paper .
50 Chapter 2: Printing T asks EN Printing Car ds, Custom-Size and Heavy P aper Custom-size paper can be printed from T ra y 1 or the optional 500-sheet tra y . For paper specifications, see page A -2. The maximum paper weight is 53 lb (199 g/m 2 ) from T ray 1 and 28 lb (105 g/m 2 ) from the 500-sheet tra y .
EN Chapter 2: Printing T asks 51 Loading Custom-Size Paper in the 500-Sheet Tray The f ollo wing instructions are for loading custom-sizes in a 500-sheet tra y (optional). For suppor ted sizes of paper, see page A-5. T o load standard sizes, see page 33.
52 Chapter 2: Printing T asks EN 6a When loading a full stack of media, continue to step 6B . Otherwise, proceed to step 7. 6b Align the tension le v er up or do wn to match the symbol displa y ed in the tension indicator window . 7 T o prev ent jam s, rotate the dial in the tra y so the pr inter will read the correct size of paper .
EN Chapter 2: Printing T asks 53 Guidelines for Printing Custom-Size Paper • Do not attempt to print on paper smaller than 3 inches (76 mm) wide or 5 inches (127 mm) long.
54 Chapter 2: Printing T asks EN If the settings are not av ailable from the software , set the custom paper size from the control panel: 1 F rom the Pr inting Menu set CONFIGURE CUSTOM PAPER=YES . 2 F rom the Pr inting Menu, select inches or millimeters as the unit of measurement.
EN Chapter 2: Printing T asks 55 Printing V ellum V ellum is special lightweight paper similar to parchment. Print v ellum from T ray 1 only , and open the rear output bin. Do not pr int on both sides of v ellum. 1 Load v ellum with the side-to-be-printed facing up and the top , shor t edge toward the right.
56 Chapter 2: Printing T asks EN Adv anced Printing T asks This section will help you tak e full advantage of the printer’ s features . These tasks are “adv anced” because they require y ou to change settings from the printer’ s control panel or the printer driver .
EN Chapter 2: Printing T asks 57 Printing the First Page on Different Paper F rom the PCL 6 printer dr iver , you can choose to print the first page of a document on diff erent paper than the rest of the pages. Look f or “Use diff erent paper f or first page” in the pr inter driver .
58 Chapter 2: Printing T asks EN Customizing T ray 1 Operation Customize T ray 1 to fit your printing needs. The printer can be set to pr int from T ra y 1 as long as it is loaded, or to print only from T ray 1 if the type of paper loaded is specifically requested.
EN Chapter 2: Printing T asks 59 Manually Feeding Paper from Tray 1 The Manual F eed f eature allows y ou to print on special paper from T ra y 1, such as envelopes or letterhead. If Man ual F eed is selected, the printer will pr int only from T ra y 1.
60 Chapter 2: Printing T asks EN Printing by T ype and Siz e of P aper Y ou can configure the pr inter to select paper by type (such as plain or letterhead) and size (such as letter or A4), as opposed to source (a paper tra y).
EN Chapter 2: Printing T asks 61 Note The type and size settings can also be configured from HP JetAdmin f or networked printers. See the printer software help . T o print by type and size , it might be necessar y to unload or close T ra y 1, or set TRAY 1 MODE=CASSETTE from the P aper Handling Menu in the printer’ s control panel.
62 Chapter 2: Printing T asks EN.
EN Chapter 3: Printer Maintenance 63 3 Printer Maintenance Overview This chapter e xplains basic printer maintenance. • Managing the toner cartridge. • Cleaning the printer. Note T o ensure optimum print quality , the printer will prompt you to ha ve routine maintenance perf ormed ev er y 150,000 pages.
64 Chapter 3: Printer Maintenance EN Managing the T oner Car tridg e HP P olicy on Non-HP T oner Car tridges Hewlett-P ac kard Company cannot recommend use of non-HP toner car tridges, either new or remanuf a ctured. Because the y are not HP products, HP cannot influence their design or control their quality .
EN Chapter 3: Printer Maintenance 65 Continue Printing When T oner is Low When toner is low , the pr inter’ s control panel displays the TONER LOW message. • If the TONER LOW message displa ys, but the printer continues printing, TONER LOW is set to CONTINUE (the default setting).
66 Chapter 3: Printer Maintenance EN Redistributing the T oner (continued) 1 Open the top co v er . 2 Remov e the toner car tridge from the printer . W ARNING! A void reaching too f a r into the printer .
EN Chapter 3: Printer Maintenance 67 Cleaning the Printer T o maintain print quality , f ollow the cleaning procedure (on the f ollo wing page) e v er y time the toner car tridge is changed, or whene v er print quality problems occur . As much as possib le , k eep the printer free from dust and debr is.
68 Chapter 3: Printer Maintenance EN Cleaning the Printer Bef ore beginning these steps, tur n the printer off and unplug the power cord. 1 Open the top cov er and remov e the toner car tridge.
EN Chapter 3: Printer Maintenance 69 Using the Printer Cleaning Page If toner specks appear on the front or bac k side of your print jobs, f ollo w the procedure below . F rom the pr inter’ s control panel, do the follo wing: 1 Press [Menu] until PRINT QUALITY MENU appears.
70 Chapter 3: Printer Maintenance EN.
EN Chapter 4: Problem Solving 71 4 Pr oblem Solving Overview This chapter will help you to troub l eshoot and solv e printer problems . Clear paper jams: Occasionally , paper can jam dur ing printing. This section will help you to locate paper jams , properly clear them from the printer , and solv e repeated paper jams.
72 Chapter 4: Prob lem Solving EN Clearing P aper Jams If the printer’ s control panel displays a paper jam message , look f or paper in the locations indicated in Figure 22, then see the procedure f or clearing the paper jam. Y ou might need to look f or paper in other locations than indicated in the paper jam message.
EN Chapter 4: Problem Solving 73 Clearing Jams fr om the Input T ray Areas Note T o remov e paper from the T ra y 1 area, slowly pull the paper out of the printer . F or all other tra ys, follo w the steps below . 1 Slide the tra y out of the printer , and remov e any damaged paper from the tra y .
74 Chapter 4: Prob lem Solving EN Clearing Jams fr om the T op Cover Area 1 Open the top cov er and remov e the toner car tridge. Caution T o pre vent damage to the toner car tridge, do not expose it to light f or more than a f ew min utes. 2 Use the green handles to lift the paper access plates.
EN Chapter 4: Problem Solving 75 Clearing Jams fr om the Output Areas Note If paper is jammed in the top output area, but most of the paper is still inside the pr inter , it is best to remov e it through the rear door . 1 Push in the two gr a y latches to release the rear door .
76 Chapter 4: Prob lem Solving EN Clearing Jams fr om the Optional Duplex er Look f or jams in the f ollowing locations: The T ra y 2 area: 1 Slide T ra y 2 out of the p rinter .
EN Chapter 4: Problem Solving 77 The rear section of the duple x er: 6 F rom the rear of the printer , use the handles on both sides of the duple x er to slide out the rear section until it stops. 7 Slowly pull an y paper out of the duple x er . The duple x er’ s top cov er : 8 Open the duple x er’ s top cov er .
78 Chapter 4: Prob lem Solving EN Solving Repeated P aper Jams If paper jams occur frequently , try the following: • Check all the paper jam locations .
EN Chapter 4: Problem Solving 79 Understanding Printer Messa g es The f ollowing tab l e e xplains messages that might displa y on the printer’ s control panel. Printer messages and their meanings are listed in alphabetical order , with numbered messages f ollo wing.
80 Chapter 4: Prob lem Solving EN CHECK INPUT DEVICE alternates with PAPER PATH OPEN PLEASE CLOSE IT The optional input tra y cannot feed paper to the printer because a door or paper guide is open. Check the doors and paper guides . CHOSEN LANGUAGE NOT AVAILABLE A print job requested a pr inter language that does not e xist in the printer .
EN Chapter 4: Problem Solving 81 FLASH IS WRITE PROTECTED The flash disk DIMM is protected, and no ne w files can be written to it. Disable the write protection through HP JetAdmin. INPUT DEVICE CONDITION xx.yy An input paper handling device has a condition that needs attention bef ore printing can resume.
82 Chapter 4: Prob lem Solving EN MEMORY SETTINGS CHANGED The printer changed its memor y settings because it did not have enough memor y to use the pre vious settings f or I/O Buff ering and Resource Saving. This usually occurs after remo ving memor y from the printer , adding a duplex er , or adding a printer language.
EN Chapter 4: Problem Solving 83 RAM DISK FILE SYSTEM IS FULL Delete files and then try again, or tur n the printer off, and then turn the printer on to delete all files on the device. (Delete files using HP JetAdmin, HP FontSmar t, or another software utility .
84 Chapter 4: Prob lem Solving EN 13.x PAPER JAM [LOCATION] Remov e jammed paper from the specified location (page 72). Open and close the top cov er to clear the message. If the message persists after all jams hav e been cleared, a sensor might be stuck or brok en.
EN Chapter 4: Problem Solving 85 22 SERIAL I/O BUFFER OVERFLOW altern ates with PRESS GO TO CONTINUE T oo much data was sent to the serial por t. Make sure the correct serial pacing option is selected from the I/O Menu in the printer’ s control panel (page B-18).
86 Chapter 4: Prob lem Solving EN 41.x PRINTER ERROR alternates with PRESS GO TO CONTINUE A temporary pr inting error occurred. Press [Go] . The page containing the error will automatically be reprinted. If this message persists, contact an HP-authorized service or suppor t provider .
EN Chapter 4: Problem Solving 87 56.x, 57.x, 58.x, or 59.x PRINTER ERROR A temporary pr inting error occurred. T ur n the printer off, and then turn the printer on. If this message persists, contact an HP-authorized service or suppor t provider . (See the HP Suppor t pages at the front of this user’s guide .
88 Chapter 4: Prob lem Solving EN 69.x PRINTER ERROR A temporary pr inting error occurred. T ur n the printer off, and then turn the pr inter on. If this message persists, contact an HP-authorized service or suppor t provider . (See the HP Suppor t pages at the front of this user’ s guide.
EN Chapter 4: Problem Solving 89 Correcting Output Quality Pr oblems Use the e xamples below to determine which output quality problem you are e xperiencing, then see the following tab le to troubleshoot the problem. Note The e xamples below depict letter-siz e paper that has passed through the printer long-edge first.
90 Chapter 4: Prob lem Solving EN 1. Paper might be too smooth. Light Print or Fade Toner Specks Dropouts Lines Gray Background Toner Smear Loose Toner Repeating Defects Misformed Characters Page Skew Curl or Wave Wrinkles or Creases Troubleshooting Steps (Follow the steps in the order they are listed.
EN Chapter 4: Problem Solving 91 Determining Printer Pr oblems T roub leshooting Flowc har t If the printer is not responding proper ly , use the flowchar t to deter mine the problem. If the printer does not pass a step , follow the corresponding troubleshooting suggestions .
92 Chapter 4: Prob lem Solving EN 2 Can you print a configuration page? YES Go to step 3 . Print a configuration page to verify that the printer is feeding paper correctly (page 101). A configuration page does not print. A blank page prints. A message other than READY or PRINTING CONFIGURATION is displayed.
EN Chapter 4: Problem Solving 93 3 Can you print from a software application? YES Go to step 4 Print a short document from a software application. The job will not print. A PS error page or list of commands prints. If the job will not print, and a message is display ed, see page 79.
94 Chapter 4: Prob lem Solving EN 4 Does the job print as expected? (Continued on the following page.) Print is garbled or only a portion of the page prints. Printing stops in the middle of the job. Print speed is slower than expected. A control panel setting is not taking effect.
EN Chapter 4: Problem Solving 95 Does the job print as expected? (continued) YES Go to step 5 . The print job is not formatted correctly. Pages are not fed correctly or are damaged. There are print quality problems. Check that y ou are using the proper printer dr iver (page 18).
96 Chapter 4: Prob lem Solving EN 5 Does the printer select the proper trays, output locations, and paper handling accessories? YES For other problems, check the Contents, the Index, or the printer software help. The printer pulls from the wrong tray.
EN Chapter 4: Problem Solving 97 T roub leshooting Flowc har t for Macintosh Users 1 Can you print from a software application? YES Go to step 2 . Print a short document from a software application. The Macintosh computer is not communicating with the printer.
98 Chapter 4: Prob lem Solving EN 2 Does the job print as expected? YES For other problems, check the Contents, the Index, the printer software help, or page 91. The print job is not sent to the desired printer. The print job has incorrect fonts. The computer cannot be used while the printer is printing.
EN Chapter 4: Problem Solving 99 Selecting an Alternate PPD 1 Open the Chooser from the Apple menu. 2 Clic k the LaserWriter icon. 3 If you are on a netw ork with multiple zones , select the zone in the AppleT alk Zones box where the printer is located.
100 Chapter 4: Problem Solving EN Chec king the Printer’ s Configuration F rom the pr inter’ s control panel, you can print pages that giv e details about the printer and its current configuration.
EN Chapter 4: Problem Solving 101 Configuration P age Use the configuration page to vie w current printer settings, to help troubleshoot printer prob lems, or to v e r ify installation of optional accessories, such as memor y (DIMMs), paper tra y s , and printer languages.
102 Chapter 4: Problem Solving EN Figure 24 Sample Configuration Page 1 Printer Information Lists the serial number , HP JetSend IP addresses, page counts, and other inf or mation for the printer .
EN Chapter 4: Problem Solving 103 PCL or PS Font List Use the f ont lists to see which f onts are currently installed in the printer . (The f ont lists also show which fonts are resident on an optional hard disk or flash DIMM.) To print a PCL or PS font list: 1 Press [Menu] until INFORMATION MENU appears .
104 Chapter 4: Problem Solving EN.
EN Chapter 5: Ser vice and Suppor t 105 5 Service and Suppor t Hewlett-P ac kard W arranty Statement 1 HP warrants HP hardw are, accessories, and supplies against def ects in materials and workmanship for the period specified abov e.
106 Chapter 5: Ser vice and Suppor t EN 6 W arranty does not apply to def ects resulting from (a) improper or inadequate maintenance or calibration, (b) software , interf acing, par ts or supplies not.
EN Chapter 5: Ser vice and Suppor t 107 Limited W arranty f or T oner Car tridge Life Note The warr anty below applies to the toner car tridge that came with this pr inter .
108 Chapter 5: Ser vice and Suppor t EN Service Information Form WHO IS RETURNING THE EQUIPMENT? Date: P erson to contact: Phone: ( ) Alternate contact: Phone: ( ) Return shipping address: Special shipping instructions: WHA T IS BEING SENT? Model name: Model number: Serial number : Please attach any relev ant pr intouts when retur ning equipment.
EN Chapter 5: Ser vice and Suppor t 109 HP Software License T erms A TTENTION: USE OF THE SOFTW ARE IS SUBJECT T O THE HP SOFTW ARE LICENSE TERMS SET FORTH BELO W . USING THE SOFTW ARE INDICA TES Y OUR A CCEPT ANCE OF THESE LICENSE TERMS. IF Y OU DO NO T A CCEPT THESE LICENSE TERMS, Y OU MA Y RETURN THE SOFTW ARE FOR A FULL REFUND.
110 Chapter 5: Ser vice and Suppor t EN W orldwide Sales and Service Offices Worldwide Sales and Service Offices Bef ore calling an HP Sales and Ser vice office, be sure to contact the appropriate Customer Suppor t Center number listed in the front of this user’ s guide.
EN Chapter 5: Ser vice and Suppor t 111 Far East Region: Hewlett-P ackard Asia Pacif ic Ltd. 17-21/F Shell T ower , Times Square 1 Matheson Street, Causew a y Bay Hong Kong Phone: (8 52) 2599-7777 F a.
112 Chapter 5: Ser vice and Suppor t EN Middle East/Afr ica: ISB HP Response Center Hewlett-P ackard S .A. Rue de V eyrot 39 P .O . Bo x 364 CH-1217 Meyrin - Gene va Switzerland Phone: (41 ) (22 ) 780.
EN Specifications A-1 A Specifications Overview This appendix includes: • Paper specifications • Printer specifications • Cable specifications.
A-2 Specifications EN P aper Specifications HP LaserJet printers produce excellent print quality . This printer accepts a v ariety of media, such as cut-sheet paper (including recycled paper), env elopes, labels, tr ansparencies, v ellum, and custom-size paper .
EN Specifications A-3 Suppor ted Sizes and W eights of P aper 1. The printer supports a wide range of paper sizes. Check the printer software for supp orte d sizes. To print custom-size paper, see page 50. 2. Capacity may vary depending on paper weight and thickness, and environmental conditions.
A-4 Specifications EN 1. The printer su pports a wide range o f media sizes. Check th e printer software for su pported sizes. 2. Capacity may vary depending on me dia we ight and thickness, and environmental con dition s. Tray 2 or Optional 250-Sheet Tray Dimensions 1 Weight Capacity 2 Letter 8.
EN Specifications A-5 1. The printer supports a wide range of media sizes. Check the printer software for supported sizes. 2. Capacity may vary depending on med ia weight and thickness, and environme ntal conditions. 3. To print rotate d paper, see page 47.
A-6 Specifications EN Suppor ted T ypes of P aper The printer suppor ts the follo wing types of paper : 1. The printer su pports a wide range o f media sizes. Check th e printer software for su pported sizes. Optional Duplex Printing Accessory (duplexer) Dimensions 1 Weight Minimum 5.
EN Specifications A-7 Guidelines for Using Paper F or best results, use con ventional 20 lb (75 g/m 2 ) paper . Make sure the paper is of good quality , and free of cuts, nicks , tears, spots , loose par ticles, dust, wrinkles, v oids, and curled or bent edges.
A-8 Specifications EN Paper Weight Equivalence Table Use this table to determine approximate equiv alent points in weight specifications other than U .S. bond weight. F or example , to deter mine the equiv alent of 20 lb U .S . bond weight paper in U .
EN Specifications A-9 Labels Caution T o av oid damaging the pr inter , use only labels recommended f or use in laser printers. If you ha ve problems printing labels , use T ra y 1 and open the rear output bin. Ne v er print on the same sheet of labels more than once.
A-10 Specifications EN V ellum V ellum is special lightweight paper similar to parchment. Print vellum from T ra y 1 only , and open the rear output bin. Do not pr int on both sides of v ellum. V ellum used in the pr inter must be ab le to withstand 392° F (200° C), the printer’ s maximum temperature .
EN Specifications A-11 Envelopes with Double-Side-Seams Double-side-seam construction has v er tical seams at both ends of the env elope rather than diagonal seams. This style ma y be more likely to wrinkle. Be sure the seam e xtends all the wa y to the corner of the env elope as illustrated below .
A-12 Specifications EN Envelope Margins The f ollo wing table giv es typical address margins for a Commercial #10 or DL env elope. Note F or the best print quality , position margins no closer than 0.6 inch (15 millimeters) from the edges of the env elope.
EN Specifications A-13 Card Stock Construction • Smoothness: 36-53 lb (135-199 g/m 2 ) card stock should have a smoothness rating of 100-180 Sheffield. 16-36 lb (60-135 g/m 2 ) card stock should have a smoothness rating of 100-250 Sheffield. • Construction: Card stock should lie flat with less than 0.
A-14 Specifications EN Printer Specifications Ph ysical Dimensions Figure A-2 HP LaserJet 5000 Printer Dimensions (top and side views) 11.9 in (30.3 cm) 24.6 in (62.5 cm) 18.5 in (47.0 cm) 10.6 in (27.0 cm) 18.5 in (47.0 cm) 4.3 in (11.0 cm) 18.7 in (47.
EN Specifications A-15 Figure A-3 HP LaserJet 5000 N/5000 GN Printer Dimensions (top and side views) 24.6 in (62.5 cm) 6.1 in (15.5 cm) 24.4 in (62.0 cm) 18.
A-16 Specifications EN Figure A-4 Maximum Accessories Configuration (top and side views) Printer Weight (Without Toner Cartridge) • HP LaserJet 5000 printer: 50 lb (23 kg) • HP LaserJet 5000 N/5000 GN printers: 75 lb (34 kg) • HP LaserJet 5000 GN printer with duplexer and optional 250-sheet feeder: 114 lb (52 kg) 29.
EN Specifications A-17 En vironmental Specifications Electrical Specifications Printer State Power Consumption (average, in watts) Printing 365 Standby 40 P owerSave (def ault activati on time 30 minutes) 27 Off 0 Minimum Recommended Circuit Capacity 100-127 V olt 10.
A-18 Specifications EN Acoustic Emissions (Per ISO 9296) General Specifications 1. You might want to install printers with sound power Lwad>=6.3 bels (A) or more in a separate room or cubicle. Printer State Sound Power 1 Printing, 16 pages per minute (ppm) L wad = 6.
EN Specifications A-19 Serial Cable Specifications Serial communication is simply the transmission of data one bit at a time. With just one bit to tr ansmit at a time, data can be tr ansf erred with a simple electrical circuit consisting of only two wires.
A-20 Specifications EN Hewlett-P ac kard off ers the f ollowing serial cab les and adapter f or use with the printer : With the C2809A serial cable adapter installed on the printer , you can connect a 25-pin cable connector to the printer . The adapter pin connections are shown belo w .
EN Specifications A-21 DB-9 Serial Cable Pin Outs DB-25 Serial Cable Pin Outs Note The pin outs f or the computer end are typical pin numbers . The actual pin numbers f or your computer ma y be diff erent. Check the documentation f or y our computer to v erify the proper pin outs.
A-22 Specifications EN.
EN Control P anel Menus B-1 B Contr ol P anel Menus Overview Y ou can perform most routine pr inting tasks from the computer through the printer dr iv er or software application. This is the most conv enient w a y to control the printer , and will ov erride the printer’ s control panel settings.
B-2 Control P a nel Menus EN Inf ormation Menu This menu contains printer info r mation pages that giv e details about the printer and its configuration.
EN Control P anel Menus B-3 P aper Handling Menu When paper handling settings are correctly configured through the control panel, you can print b y choosing the type and size of paper from the printer dr iv er or software application. F or more information, see page 60.
B-4 Control P a nel Menus EN MANUAL FEED=OFF OFF ON F eed the paper manually from T ra y 1, rather than automatically from a tra y . When MANUAL FEED=ON and T ray 1 is empty , the printer goes offline when it receives a print job and displays MANUALLY FEED [PAPER SIZE] .
EN Control P anel Menus B-5 Print Quality Menu Some items in this menu can be accessed from a softw are application, or from the printer dr iv er (if the appropriate dr iver is installed). Printer dr iv er and softw are application settings override control panel settings.
B-6 Control P a nel Menus EN ECONOMODE=OFF OFF ON T ur n EconoMode on (to sav e toner) or off (f or high quality). EconoMode creates draft-quality printing by reducing the amount of toner on the printed page by up to 50%. Caution HP does not recommend full-time use of EconoMode.
EN Control P anel Menus B-7 Printing Menu Some items in this menu can be accessed from a softw are application, or from the printer dr iv er (if the appropriate dr iver is installed). Printer dr iv er and softw are application settings override control panel settings.
B-8 Control P a nel Menus EN X DIMENSION= 12.28 INCHES (110V printers) or 312 MILLIMETERS (220V printers) 3.00 to 12.28 INCHES (110V printers) or 76 to 312 MILLIMETERS (220V printers) This item appears only when CONFIGURE CUSTOM PAPER=YES . Select the dimension to be f ed into the printer .
EN Control P anel Menus B-9 PCL FONT POINT SIZE=12.00 4.00 to 999.75 This item might not appear , depending on the f o nt selected. Press [-V alue+] once to change setting by increments of .25 f or point size , or hold down [-V alue+] to scroll by increments of 1.
B-10 Control P anel Menus EN Configuration Menu Items in this menu aff ect the pr inter’ s behavior . Configure the pr inter according to your printing needs.
EN Control P anel Menus B-11 RESOURCE SAVE= OFF OFF ON AUTO Dedicate printer memor y to sav e each language’ s per manent resources. (Y ou might need to add memor y to the printer in order for this item to appear .) The amount of memor y set aside can be different f or each installed language.
B-12 Control P anel Menus EN PAGE PROTECT= AUTO AUTO ON This item appears only after a 21 PAGE TOO COMPLEX, PRESS GO TO CONTINUE message displa ys (page 84). Memory Enhancement technology (MEt) attempts to guarantee that all pages will print. If the page does not print, tur n PAGE PROTECT to ON .
EN Control P anel Menus B-13 MOPIER MODE= STANDARD STANDARD ENHANCED OFF Determine how the mopier functions behave . This item appears only when there is at least 8 MB of memor y or an optional hard disk is installed. STANDARD : This option is av ailable if there is either a hard disk installed or a RAM disk configured in memor y .
B-14 Control P anel Menus EN JAM RECOVERY= AUTO AUTO ON OFF Determine how the printer behaves when a paper jam occurs. AUTO : The printer automatically selects the best mode fo r printer jam recovery (usually ON ). This is the def ault setting. ON : The printer automatically repr ints pages after a paper jam is cleared.
EN Control P anel Menus B-15 I/O Menu Items in the I/O (input/output) Menu aff ect the communication between the printer and the computer . I/O Menu Item Values Explanation I/O TIMEOUT=15 5 to 300 Select the I/O timeout period in seconds. (I/O timeout ref ers to the time, measured in seconds, that the printer waits bef ore ending a print job .
B-16 Control P anel Menus EN PARALLEL HIGH SPEED=YES YES NO Select the speed at which data is transmitted to the pr inter . YES : The printer accepts faster parallel communications used f or connections with newer computers . NO : The printer accepts slower parallel communications used f or connections with older computers.
EN Control P anel Menus B-17 SERIAL BAUD RATE=9600 300 600 1200 2400 4800 9600 19200 38400 57600 115200 Select the printer’ s baud rate (speed at which inf ormation is transferred) f or communicating from the computer to the p rinter . SERIAL DTR POLARITY=HIGH HIGH LOW Determine whether pin #8 is high or low when the printer is ready .
B-18 Control P anel Menus EN EIO Menu (5000 N/5000 GN) EIO (enhanced input/output) Menus depend on the par ticular accessor y product installed in an EIO slot of the printer . If the pr inter contains an HP JetDirect print ser ver EIO card, y ou can configure basic networking parameters using the EIO Menu.
EN Control P anel Menus B-19 CFG TCP/IP=NO NO YES NO : The TCP/IP Menu is not accessible . YES : The TCP/IP Menu appears . In the TCP/IP Menu, y ou can specify BOOTP=YES for TCP/IP parameters to be automatically loaded from a bootp or DHCP server when the printer is turn ed on.
B-20 Control P anel Menus EN Resets Menu Use this menu with caution. Y ou can lose buff ered page data or printer configuration settings when you select these items . Only reset the printer under the follo wing circumstances: • You want to restore the printer’s default settings.
EN Printer Memor y and Expansion C-1 C Printer Memory and Expansion Overview The printer has three dual in-line memory module (DIMM) slots for upgrading with: • More printer memory. DIMMs are available in 4, 8, 16, and 32 MB, for a maximum of 100 MB.
C-2 Printer Memor y and Expansion EN Installing Memory Caution Static electricity can damage dual in-line memor y modules (DIMMs). When handling DIMMs, either we ar an antistatic wrist strap or frequently touch the surf ace of the DIMM’ s antistatic package , then touch bare metal on the printer .
EN Printer Memor y and Expansion C-3 6 Slide the f ormatter board back into the pr inter and tighten the two screws . 7 If an optional duple x er is installed, reattach the cable tr a y and the rear section of the duple x er . Reattach any interf ace cables , and the pow er cord.
C-4 Printer Memor y and Expansion EN If an optional duplexer is installed: 1 Slide the rear section of the duple x er aw a y from the printer . 2 Remov e the rear section of the duple x er b y lifting and rotating the rear section to clear all of the tabs in the groov es, as illustrated.
EN Printer Memor y and Expansion C-5 Chec king Memory Installation F ollow this procedure to v er ify that DIMMs are installed correctly: 1 Check that the printer’ s control panel displays READY when the printer is tur ned on. If an error message appears, a DIMM might hav e been incorrectly installed.
C-6 Printer Memor y and Expansion EN Adjusting Memory Settings Resource Saving Resource Saving allo ws the pr inter to keep do wnloaded resources (permanent downloaded fonts , macros, or patter ns) in memor y when the printer language or resolution is changed.
EN Printer Memor y and Expansion C-7 I/O Buffering T o allow the computer to continue w orking without waiting f or the print job to finish queuing, the pr inter uses a por tion of its memor y (an I/O buff er) to hold jobs in progress. (If I/O b uff ering is off , no memor y is reser v ed f or this function.
C-8 Printer Memor y and Expansion EN Installing EIO Car ds/Mass Storage T ur n off the printer before installing the EIO card or mass storage de vice. See Figure C-1 f or orientation and location of the EIO card or optional mass storage de vice, such as a hard disk.
EN Printer Commands D-1 D Printer Commands Overview Most software applications do not require y ou to enter printer commands. See y our computer and softw are documentation to find the method f or entering pr inter commands, if needed. Note The table at the end of this appendix contains commonly used PCL 5e commands (page D-5).
D-2 Printer Commands EN Understanding PCL Printer Command Syntax Bef ore using printer commands, compare these characters: Many printer commands use the low ercase letter l (l) and the number one (1) , or the uppercase letter O (O) and the n umber zero (0) .
EN Printer Commands D-3 Combining Escape Sequences Escape sequences ma y be combined into one escape sequence string. There are three impor tant r ules to fo llow when combining code: 1 The first two characters after the ? character (the parameteriz ed and group char acters, see Figure D-1) must be the same in all of the commands to be combined.
D-4 Printer Commands EN Selecting PCL Fonts PCL printer commands for selecting f onts can be found on the PCL F ont List (page 103). A sample section is sho wn below . Notice the two v ariable bo xes f or symbol set and point size. These v ar iables m u st be filled in or the printer will use def aults.
EN Printer Commands D-5 Common PCL Printer Commands Common PCL Printer Commands Function Command Options (#) Job Control Commands Reset ?E n/a Number of Copies ?&l#X 1 to 999 2-sided/1-sided prin .
D-6 Printer Commands EN Page Control Commands (Continued) T op Margin ?&l#E # = n umber of lines T ext Length (botto m margin) ?&l#F # = number of lines from top margin Left Margin ?&a#L #.
EN Printer Commands D-7 Font Selection Symbol Sets 2 ?(# 8U = HP Roman-8 Symbol Set 10U = IBM Lay out (PC-8) (code page 437) Default Symbol Set 12U = IBM Layout f or Europe (PC-850) (code page 850) 8M = Math-8 19U = Windo ws 3.1 Lati n 1 9E = Windows 3.
D-8 Printer Commands EN.
EN Regulator y Inf or mation E -1 E Regulatory Information FCC Regulations This equipment has been tested and f ound to comply with the limits f or a Class B digital de vice, pursuant to P ar t 15 of the FCC rules. These limits are designed to provide reasonab le protection against har mful interf erence in a residential installation.
E-2 Regulator y Inf ormation EN En vir onmental Pr oduct Stewar dship Pr otecting the En vir onment Hewlett-P ac kard Company is committed to pro viding quality products in an environmentally-sound manner . The pr inter has been designed to minimize impacts on the en vironment.
EN Regulator y Inf or mation E -3 The design of the printer facilitates the recycling of: Plastics Europe Only: Plastic par ts hav e material identification markings, according to international standards, which enhance the ability to identify plastics for proper disposition at the end of the printer’ s lif e.
E-4 Regulator y Inf ormation EN The diagram belo w represents how HP LaserJet t oner car tridges are recycled: Printer and Par ts U. S. O n l y : HP’ s Hardware Recycling Organization will accept the printer and other HP products when you ha ve no fur ther use f or them.
EN Regulator y Inf or mation E -5 P aper Europe Only: The printer is suited for the use of recycled papers when the paper meets the guidelines outlined in the HP LaserJet Printer F amily P aper Specifications Guide . The printer is suited for the use of recycled paper according to DIN 19 309.
E-6 Regulator y Inf ormation EN T oner Material Safety Data Sheet The T oner Material Safety Data Sheet can be obtained by calling your local HP FIRST n umber .
EN Regulator y Inf or mation E -7 Dec laration of Conformity according to ISO/IEC Guide 22 and EN45014 Manufacturer's Name: Hewlett-P ackard Company Manufacturer's Address: 11311 Chinden Bou.
E-8 Regulator y Inf ormation EN Safety Statements Laser Safety Statement The Center f or De vices and Radiological Health (CDRH) of the U .S. F ood and Drug Administration has implemented regulations f or laser products manuf actured since A ugust 1, 1976.
EN Regulator y Inf or mation E -9 Laser Statement f or Finland LASER TUR V ALLISUUS LUOKAN 1 LASERLAITE KLASS 1 LASER APP ARA T HP LaserJet 5000, 5000 N, 5000 GN -laserkirjoitin on käyttäjän kannalta tur v allinen luokan 1 laserlaite. Nor maalissa käytössä kirjoittimen suojakotelointi estää lasersäteen pääsyn laitteen ulkopuolelle .
E-10 Regulator y Inf or mation EN.
EN Glossar y 1 Glossary adjustable tray A paper tr ay that is ab le to adapt to more than one size of media. All tra ys used in the pr inter are adjustable . DIMM (dual in-line memor y module) A circuit board that holds e xtra memory chips for the prin ter .
2 Glossar y EN printer software Any or all of the softw are shipped with the printer . The printer is packaged with a compact disc containing the software needed to access all of the printer’ s f eatures . If the printer has been correctly set up, the appropriate software is already installed.
EN Index 1 Inde x Numerics 1200 dpi B-5 250-sheet tra y loading 31 – 32 ordering 8 paper orientation 41 paper specifications A-4 2-sided printing, see duplex printing accessor y 2-up printing 57 300.
2 Inde x EN menus B-1 – B-20 messages 79 – 88 printing current settings 13 printing menu map 13 , 100 settings 13 troubleshooting 91 conv er ting paper weights A-8 Copies setting B-7 Courier setti.
EN Index 3 B-9 fix ed-spaced D-4 information about 103 installing and deleting 19 internal 103 ordering DIMMs 9 printing list of 103 propor tional-spaced D-4 selecting PCL D-4 soft 103 troubleshooting.
4 Inde x EN Loading Program message 81 locating paper jams 72 locking control panel 21 locking out paper tra ys 6 0 loose toner , troubleshooting 89 – 90 , A-7 M Macintosh network cable kit, orderin.
EN Index 5 B-4 P aper Jam message 84 paper jams 72 – 78 duple x er 76 – 77 input tra y areas 73 locating 72 output areas 75 repeated jams 78 top cov er area 74 Tr a y 1 7 3 P aper P ath Open Pleas.
6 Inde x EN Printing Menu B-7 – B-9 problem solving, printer errors 71 – 103 Process Cleaning P age setting B-6 product return 105 – 106 , 108 Product Stew ardship acoustic emissions A-18 consum.
EN Index 7 printing 40 – 55 specifications acoustic emissions A-18 card stock A-12 – A-13 electrical A-17 env elopes A-10 – A-12 general A-18 heavy paper A-12 – A-13 labels A-9 paper A-2 – A.
8 Inde x EN 90 , A-10 wrong printer selected, troubleshooting (Macintosh) 98 wrong tra y , troubleshooting 96 X X Dimension setting B-8 Y Y Dimension setting B-8.
Copyright© 1998 He wlett-Packard Co. Printed in USA Manual Part No. C4110-90901 *C4110-90901* *C4110-90901* C4110-90901 HP LaserJet 5000, 5000 N, and 5000 GN Printers User's Guide HP LaserJet 50.
An important point after buying a device HP (Hewlett-Packard) 5000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP (Hewlett-Packard) 5000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP (Hewlett-Packard) 5000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP (Hewlett-Packard) 5000 you will learn all the available features of the product, as well as information on its operation. The information that you get HP (Hewlett-Packard) 5000 will certainly help you make a decision on the purchase.
If you already are a holder of HP (Hewlett-Packard) 5000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP (Hewlett-Packard) 5000.
However, one of the most important roles played by the user manual is to help in solving problems with HP (Hewlett-Packard) 5000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP (Hewlett-Packard) 5000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
