Instruction/ maintenance manual of the product 2600P HP (Hewlett-Packard)
Go to page of 34
ASTROJET 2600P/2800P PRINTER OPERATOR MANUAL Astro Machine Corp. 630 Lively Blvd. Elk Grove Village, IL 60007 Phone: (847 ) 364-6363 Fax: (847) 36 4-9898 www.
SAFETY PRECAUTIONS THIS EQUIPMENT PRESENTS NO PROBLE M WHEN USED PROPERLY. HOWEVER, CERTAIN SAFETY RULES SHOULD BE OBSERVED WHEN OPERATING THE ASTROJET 2600P/2800P PRINTER.
TABLE OF CONTENTS i Table of Contents Section 1 – Getting Acquainted 1 Operator View Rear View Control Panel 1 2 3 Section 2 – Installing the Printer 5 Choosing a Location Connecting the AstroJet .
TABLE OF CONTENTS ii Notes.
SECTION 1 GETTING ACQUAINTED 1 Section 1 – Getting Acquainted AJ 2600P Shown Operator View 1. Exit Guides – These guides help the media to exit the printer. 2. Print Head Assembly – The AstroJet 2600P is e quipped with six printheads arranged on two rails and can print an image up to 3” wide.
SECTION 1 GETTING ACQUAINTED 2 AstroJet 2600P Shown Rear View 1. Main Power Switch and Power Receptacle – The power cord is plugged in here and the switch turns the printe r ON and OFF. 2. Main Power Fuse – This fuse protects all of the electronic ci rcuits in the printer.
SECTION 1 GETTING ACQUAINTED 3 Control Panel 1. MEDIA THICKNESS – The knob on the right side of the control panel is used to adjust the height of the print heads to compensate for different media thickness. 2. ON LINE key – The indicator on this key light s when data is sent to the ASTROJET 2600P/2800P and they are ready to begin printing.
SECTION 1 GETTING ACQUAINTED 4 Notes.
SECTION 2 INSTALLING THE PRINTER 5 Section 2 – Installing the Printer Before usin g the print er the followi ng must be done: • Choose a location for the Printer • Plug in the printer and conn e.
SECTION 2 INSTALLING THE PRINTER 6 Install the Inkjet Cartridges The AstroJet 2 600P/2800P can be configure d with up to six inkjet cartri dges. The cartri dges are i nstalled as follows: • Rem ove the in kjet cartridge from i ts packaging, taking care n ot to touch the copper contacts, the metal plate, or the gold printhead.
SECTION 2 INSTALLING THE PRINTER 7 4. Loosen the knobs on t he side guides. Adjust the side guides to wi thin 1/32-i nch of the m edia. Then tig hten the knobs. 5. Adjust the back guide so that the media is raised approximately 1/2- inch and rests on th e curve of the back guide.
SECTION 2 INSTALLING THE PRINTER 8 1. If you have, any applications running on your computer close th em and restart the computer before begin ning the driver installation. 2. Install the CD in the CD drive and click on START . Then click on RUN , then type the fo llowing; D :Setup.
SECTION 3 OPERATING THE ASTROJET 2600P/2800P 9 Section 3 – Operating the AstroJet 2600P/2800P Once the Printer Driver is installed on your computer, you ar e ready to start printing. This section is divided into three parts. T he first descri bes the funct ion of the printer cont rol panel.
SECTION 3 OPERATING THE ASTROJET 2600P 10 Purge – The purging function is useful to clear the prin thead no zzles when the machine has been sitting idle for a period. To activate t he purge, press the ENTER key and feed media. To stop the purge press, ENTER again.
SECTION 3 OPERATING THE ASTROJET 2600P/2800P 11 To start printing click on F ile , then P rint . The Print window will o pen. If you wish to print the job click on OK . If you wish to use the special features built in to the AstroJet 2600P/2800P drivers.
SECTION 3 OPERATING THE ASTROJET 2600P 12 The Feed Delay can be used t o put more space betwee n the pieces as they are being printed. This will give the first piece printed more tim e to dry before the next piece is prin ter. T he adjustment range is in 0.
SECTION 3 OPERATING THE ASTROJET 2600P/2800P 13 To use the Overlay feature, first creat e a layout in an application such as Microsoft Word. Place all of the fixed information and graphics on this layout. Open the layout and go to P rint in the F ile menu.
SECTION 3 OPERATING THE ASTROJET 2600P 14 Printing from Microsoft Word If you are not using a specific program desi gned for m ailing applications it is possible t o print your mail pieces using Microsoft Word. Th is section will cover how to layout a pi ece a nd to print from Microsoft Word.
SECTION 3 OPERATING THE ASTROJET 2600P/2800P 15 When you have completed the steps abov e the layout for an AstroJet 2600P sho uld look like the one below.
SECTION 3 OPERATING THE ASTROJET 2600P 16 “Printer”, the merge will send directly to th e printer and each record will be printed. The next selection is “Records to be merged”. You ca n select A ll or F rom . The last selection is “When merging records”.
SECTION 4 MAINTENANCE 17 Section 4 - Maintenance This section covers how to care for th e ink cartridges, clear paper jam s, re place the sheet separat ors, and perform routing maintenanc e on the printer.
SECTION 4 MAINTENANCE 18 Short-term Storage Leave the cartridge in the Printer for short periods of time, 1 day or less. The next tim e that the Pri nter is use d, the printhea d may have t o be clean.
SECTION 4 MAINTENANCE 19 2600P/2800P/2800P Printer. It can be accessed from the LCD panel on the Pri nter from the MENU key. If this does not s olve the probl em then pr oceed as foll ows: 1. Wipe the pri nthead with a wet cloth as described in " Cleaning the Printhead" above.
SECTION 4 MAINTENANCE 20 Replacing the Feed Rollers To replace the feed rollers on the AstroJet printer follow the steps below: 1. Before removi ng the feed roller access plate, unplug the power to the printer. 2. Using a Phillips screwdriver, remove the three screws from the feed roller access plate.
SECTION 4 MAINTENANCE 21 Cleaning The ASTROJET 2600P/2800P WARNING THE PRINTER IS A PRECISION M ACHINE THAT SHOULD BE CLEANED REGULARLY TO INSURE MA NY YEARS OF SERVICE. BEFOR E PERFORMING ANY MAINTE NANCE, DI SCONNECT THE MACHI NE FROM ITS PO WER SOURCE ! The Printer m ust be cleaned r egularly of accumul ated paper dust and ink.
SECTION 4 MAINTENANCE 22 Notes.
SECTION 5 TROUBLE SHOOTING 23 Section 5 – Trouble Shooting Guide The following trouble shooting guides are provided to assist you in solving any problems that might occur with the ASTROJET 2600P/2800P Printer or its software. We have tried to make them as complete as possible.
SECTION 5 TROUBLE SHOOTING 24 The Printer CONDITION PROBLEM SOLUTION Extra lines; losing data Database problem Check data in database progra m Improper output (address information out of order, miss- feeding, etc.) Wrong interface settings Static electricity Dirty me dia sensor Check softwar e or data base on PC.
APPENDIX A 25 Appendix A – ASTROJET 2600P/2800P Specifications PRINT TECHNOLOGY AstroJet 2600P Inkj et, 6 HP 51645A High Capacity Inkjet Cartr idges AstroJet 2800P Inkj et, 8 HP 51645A High Capacity.
APPENDIX B 26 Appendix B – Supplies and Optional Hardware The following supply items and optional hardware are available from your Astro Machine Dealer: Supplies Black Inkjet Cartridge HP 51645A Fas.
INDEX 27 - Key 3, 10 + Key 3, 10 A Accessory Connector 2 Adjusting Resolution 12 Adjusting S peed 12 Adjusting, Print Heads 13 B Batch Co unter 9 BIOS Version 10 Bulk Ink 10 C Cartridge Disposal 18 Ca.
INDEX 28 Specifications 25 Speeds 12 Storage, Cart ridges 17 Supplies 26 T Test Print Key 3, 9 Total Count 10 Trouble Shootin g 20 U USB Port 2, 5 W Windows 2600 P 11 Windows 95 11 Windows 98 11 Windo.
.
Copyright © 2005 ASTRO MACHNE CORP. Elk Grove Village, IL 60007 10/13/20 05 Part Number: 200-AJ2600/2800PCL.
An important point after buying a device HP (Hewlett-Packard) 2600P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP (Hewlett-Packard) 2600P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP (Hewlett-Packard) 2600P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP (Hewlett-Packard) 2600P you will learn all the available features of the product, as well as information on its operation. The information that you get HP (Hewlett-Packard) 2600P will certainly help you make a decision on the purchase.
If you already are a holder of HP (Hewlett-Packard) 2600P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP (Hewlett-Packard) 2600P.
However, one of the most important roles played by the user manual is to help in solving problems with HP (Hewlett-Packard) 2600P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP (Hewlett-Packard) 2600P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
