Instruction/ maintenance manual of the product 2/8q Fibre Channel HP (Hewlett-Packard)
Go to page of 188
User Guide HP S tor age W or ks 2/8q F ibr e C hannel S w itc h Management F ir st E dition (No v embe r 2004) Pa r t N u m b e r : A7 4 50–9 6 00 7 This m anual des cr ibes th e management t ools f.
© Cop yr ight 2004 He wlett-P ackar d De velo pment Compan y , L.P . Hew lett-P ac kar d Com pany mak es no war r anty of any kind with r egar d to this mater ial , including , but not limited to , the implied war r anties of mer chan tability and fitness f or a particular pur pose .
3 HP St or ag e W orks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Gu ide Contents Contents About this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Overview. . .
Content s 4 HP Stor age W or ks 2/8q Fibr e Ch annel Sw itch Managemen t User Gui de Working status indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Using the topology display .
Content s 5 HP St or ag e W orks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Gu ide Default Visibility parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Restoring default zoning .
Content s 6 HP Stor age W or ks 2/8q Fibr e Ch annel Sw itch Managemen t User Gui de Domain ID and Domain ID Lock parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Broadcast Support parameter . . . . . . .
Content s 7 HP St or ag e W orks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Gu ide Rescaling a selected graph . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Saving graph statistics to a file.
Content s 8 HP Stor age W or ks 2/8q Fibr e Ch annel Sw itch Managemen t User Gui de Firmware Install command. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 Authority . . . . . . . . . .
Content s 9 HP St or ag e W orks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Gu ide Reset command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 Authority .
Content s 10 HP Stor age W or ks 2/8q Fibr e Channel S w itch Managemen t User Guide Authority . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 Syntax . . . . .
Content s 11 HP Storag e Wor ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Guide 5 Switch Manager Topology window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 6 Switch Manager Faceplate window .
Content s 12 HP Stor age W or ks 2/8q Fibr e Channel S w itch Managemen t User Guide 15 IP configuration parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 16 SNMP Configuration parameter .
13 HP Storag e Wor ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Guide About This Guide About this Guide About this Guide This guide provides informatio n to help you use the follo wing management.
Abou t th is Gu ide 14 HP Stor age W or ks 2/8q Fibr e Channel S w itch Managemen t User Guide Overvie w This section cov ers the follo wing topics: ■ Intended audience ■ Related docume ntation Intended audience This book is intended for us e by the system adm inistrato r responsible fo r the MSA1000 storage system.
Abou t th is Gu ide 15 HP Storag e Wor ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Guide Conv entions Con v entions consist of the following: ■ Document con ventions ■ Te x t s y m b o l s ■ Equipment symbols Docum ent conv entions This document follo ws the con v entions in Ta b l e 1 .
Abou t th is Gu ide 16 HP Stor age W or ks 2/8q Fibr e Channel S w itch Managemen t User Guide Equipment s ymbols The follo wing equipment symbols may be foun d on hardware for which this guide pertains.
Abou t th is Gu ide 17 HP Storag e Wor ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Guide Getti ng hel p If you still ha ve a question after reading this guid e, contact an HP Authorized Service Provider or access the follo wing HP web site: ht tp://w ww .
Abou t th is Gu ide 18 HP Stor age W or ks 2/8q Fibr e Channel S w itch Managemen t User Guide HP technical suppor t T elephone numbers for worldwid e technical supp ort are listed on the follo wing HP web site: http://ww w . hp .com/support/ . From this web site, select the country of origin.
19 HP Storag e Wor ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Guide 1 S w it ch Ma n a ge r This chapter describes ho w to use the Switch Manager app lication and its menus, including: ■ Gett.
Swi t ch M a n ag e r 20 HP Stor age W or ks 2/8q Fibr e Channel S w itch Managemen t User Guide Getti ng s ta rted ■ Installing Switch Manager , page 20 ■ Starting Switch Manager , page 21 ■ Ex.
Swi t ch M a n ag e r 21 HP Storag e Wor ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Guide Installing S witch M anager on Linu x sy stems 1. Close all programs currently runni ng, and th en insert the Small Bu siness S AN Software CD into the server or management workstation CD-R OM driv e.
Swi t ch M a n ag e r 2 2 HP Stor age W or ks 2/8q Fibr e Ch annel Sw itch Managemen t User Gui de ■ Open existing fabric view file —Opens the Open V ie w dialog box which prompts you to specify a fabri c view file that you sav ed earlier . See “ Opening a fabric vie w f ile ” on page 37.
Swi t ch M a n ag e r 23 HP St or ag e W orks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Gu ide Remo ving S witch Manag er Remo ving S witch Manager from W indow s T o remove Switch Manager fro m W indo ws: 1. Browse for and change to the installation directory: The default directory is C:Program FilesHPHP_StorageWork s_Switch_Manager .
Swi t ch M a n ag e r 2 4 HP Stor age W or ks 2/8q Fibr e Chann el Sw itch Managemen t User Gui de Setting Sw itch M anager preferences Using the preferences settings to: ■ Change the location of the w orking directory in which to sa ve f iles. ■ Change the location of the bro wse r used to vie w the online help.
Swi t ch M a n ag e r 25 H P Storage W orks 2/ 8q Fibre Chann el Switch Ma nage ment Us er Gu ide Using online help Online help is a vailable for the Switc h Manager applicatio n and its functions. Y ou can do one of the following to open the onli ne help file: ■ Select Help > Help Topics .
Swi t ch M a n ag e r 2 6 HP Stor age W or ks 2/8q Fibr e Chann el Sw itch Managemen t User Gui de Figur e 6: Switch M anager Faceplate windo w Menu bars In addition to the menu bar, bo th the topolog y and faceplate displays ha ve contex t sensitiv e menus that pop up when y ou right-click in the grap hic windo w .
Swi t ch M a n ag e r 27 HP St or ag e W orks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Gu ide T opology displa y menu bar options and shortc ut ke ys Figur e 7 : T opology display menu bar optio.
Swi t ch M a n ag e r 2 8 HP Stor age W or ks 2/8q Fibr e Ch annel Sw itch Managemen t User Gui de Faceplate displa y menu bar options and shortc ut ke y s Figur e 8: Faceplate display menu bar option.
Swi t ch M a n ag e r 29 H P Storage W orks 2/ 8q Fibre Chann el Switch Ma nage ment Us er Gu ide T ool bar The tool bar consists of a ro w of graphical buttons that are used to access Switch Manager functions ( Ta b l e 5 ). T ool bar buttons are an alternati ve me thod to using the m enu bar .
Swi t ch M a n ag e r 30 HP Stor age W or ks 2/8q Fibr e Channel S w itch Managemen t User Guide Figur e 9: Fabr ic tree Each fabric tree entry has a small icon next to it that uses color to in dicate operational status. ■ A green icon indicates normal operatio n.
Swi t ch M a n ag e r 31 HP Storag e Wor ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Guide Data windo w and tabs The data windo w presents a table of data and statistics associated with the selected tab . ( Figure 6 .) Use the scroll bar to bro wse through the data.
Swi t ch M a n ag e r 3 2 HP Stor age W or ks 2/8q Fibr e Chann el Sw itch Managemen t User Gui de Sw itch s tatus Switch icon shape and color prov ide information about the switc h and its operational state.
Swi t ch M a n ag e r 33 H P Storage W orks 2/ 8q Fibre Chan nel Switch M anag ement User Gu ide Y ou can save a custom arrangement, or layo ut, and restore that layout during a Switch Manager session. Begin by arranging the icons, and then select Vi e w > R emember Layout .
Swi t ch M a n ag e r 34 HP Stor age W or ks 2/8q F ibre C hannel Sw itch Management User Gui de Context-sensiti ve menus are displayed when you right-click on the faceplate image or on a port icon in the faceplate display .
Swi t ch M a n ag e r 35 H P Storage W orks 2/ 8q Fibre Chan nel Switch M anag ement User Gu ide Ma naging fabrics This section describes the follo wi ng tasks that manage fabrics: ■ Managing fabric.
Swi t ch M a n ag e r 36 HP Stor age W or ks 2/8q F ibre C hannel Sw itch Management User Gui de Fabr ic services Fabric services security includ es SNMP and In-band mana gement. Simple Network Management Pro tocol (SNMP) is the protocol go verning netw ork management and monitoring of network de vices.
Swi t ch M a n ag e r 37 HP Storage W or ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Gu ide Figur e 12: Add a New Fabric dialog bo x 2. Enter a fabric name (optional) and the IP address of the switch through which to manage the fabric. 3. Enter an accoun t name and password.
Swi t ch M a n ag e r 38 HP Stor age W or ks 2/8q F ibre C hannel Sw itch Management User Gui de Sav ing a fabric v iew file 1. Select File > Save View As . The Sa ve V iew dialog box is displayed. 2. Enter a ne w f ile name. 3. Enter a file password, if necessary .
Swi t ch M a n ag e r 39 H P Storage W orks 2/ 8q Fibre Chan nel Switch M anag ement User Gu ide Replacing a failed s witch The archi ve/restore works for all switches. Ho we ver , the Restore menu item is not a vailable for the in-band switches. Y ou can only restore a switch out-of-band (the f abric management switch).
Swi t ch M a n ag e r 40 HP Stor age W or ks 2/8q Fibr e Channel S w itch Managemen t User Guide Deleting a link T o delete a link: 1. Select one or more links in the topology display , and then select Switch > Delete . Displa ying f abric infor mation The topology display is the primary tool for mo nitoring a f abric.
Swi t ch M a n ag e r 41 HP Storag e Wor ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Guide Even t Brows er The Event Bro wser displays a list of ev ents ge nerated by the switches in t he fabric and the Switch Manager application.
Swi t ch M a n ag e r 4 2 HP Stor age W or ks 2/8q Fibr e Chann el Sw itch Managemen t User Gui de Figur e 13: Ev ent Bro wser Note: ■ Ev ents th at ar e gene ra ted b y the app licati on ar e not s av ed on the s wit ch .
Swi t ch M a n ag e r 43 HP Storage W or ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Guide Filt eri ng t h e Eve nt B rowser Filtering the Ev ent Bro wser en able s you to di splay only those e v en ts that are of interest based on the ev ent se verity , timestamp, source, type, an d description.
Swi t ch M a n ag e r 44 HP Stor age W or ks 2/8q F ibre C hannel Sw itch Management User Gui de Savi ng t he Even t Browse r to a fi le T o sa ve the Ev ent Bro wser to a f ile: Note: F ilter ed e ven ts ar e not sav ed. 1. Filter and s ort the Even t Brow se r to obtain the desired display .
Swi t ch M a n ag e r 45 H P Storage W orks 2/ 8q Fibre Chann el Switch Ma nage ment Us er Gu ide Zoning a f abric Zoning enables you to d i vide the ports and devices of the fabric into zones for more ef ficient and secure communication amon g functionally grouped nod es.
Swi t ch M a n ag e r 46 HP Stor age W or ks 2/8q F ibre C hannel Sw itch Management User Gui de T wo types of zones are supported. The follo wing zone ty pes define increasingly restrictiv e le vels of communication. ■ Soft zones ■ Hard zones (A CL zoning) Soft Zones Soft zoning di vides the fabric for purposes of controlling discov ery .
Swi t ch M a n ag e r 47 H P Storage W orks 2/ 8q Fibre Chan nel Switch M anag ement Us er Gu ide The zoning l imits for a fabric a re as follo ws: ■ MaxZoneSets is 256 —The maximum number of zone sets that can be config ured on the switch. This is enforced during the conf iguration of zoning and during a zoning database merge from the f abric.
Swi t ch M a n ag e r 48 HP Stor age W or ks 2/8q F ibre C hannel Sw itch Management User Gui de Using the Zoning Config dialog bo x Use the Zoning Conf ig dialog box t o change the Interop Auto Sav e and Default V isibility configuration parameters.
Swi t ch M a n ag e r 49 HP Storage W orks 2/ 8q F ibre Cha nnel Switch M ana gement User G uide Merging fabr ics and zoning Note: HP does not support merging fa bri cs. Zone merge failure A zone merg e fails if the tw o acti ve zone sets ha ve member zones with identical names that differ in membership or type.
Swi t ch M a n ag e r 50 HP Stor age W or ks 2/8q F ibre C hannel Sw itch Management User Gui de Figur e 17 : Edit Z oning dialog box Note: If the I nter op Mode pa r ameter is enabled on the S witch Pr operties dialog box , ev ery time the acti ve z one set c hanges, the s wit ch copi es it int o an inactiv e z one set sto r ed on the swit ch .
Swi t ch M a n ag e r 51 HP Storag e Wor ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Guide T able 8: Edit Zoning dialog box tool bar buttons and icons T ool bar button / icon Descriptio n Create.
Swi t ch M a n ag e r 5 2 HP Stor age W or ks 2/8q Fibr e Chann el Sw itch Managemen t User Gui de Managing zone sets Zoning a fabric in volves creating a zone set, creating zone s as zone set members, and then adding de vices as zone members.
Swi t ch M a n ag e r 53 HP Storage W orks 2/ 8q F ibre Cha nnel Switch M ana gement User G uide Copy ing a zone to a zone set T o copy an existing zone and it s member ship from on e zone set to another , Do the follo wing: 1. Select the zone and drag it to the chosen zone set.
Swi t ch M a n ag e r 54 HP Stor age W or ks 2/8q F ibre C hannel Sw itch Management User Gui de Managing zones Managing zones in v olv es the follo wing: ■ Creating a zone in a zone set ■ Adding .
Swi t ch M a n ag e r 55 HP St or ag e W orks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Gu ide Adding z one members Adding a zone member to a zone affects e very zo ne set in which that zone is a member .
Swi t ch M a n ag e r 56 HP Stor age W or ks 2/8q F ibre C hannel Sw itch Management User Gui de Remo ving a zo ne from a zone set Zones that are no longer memb ers of any zone set are mov ed to the orphan zone set. The orphan zone set is sa ved on the switch.
Swi t ch M a n ag e r 57 HP St or ag e W orks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Gu ide Creating an alias 1. Select Zoning > Edit Zoning. The Edit Zoning dialog box is displayed ( Figure 1 7 ). 2. Select Edit > Create Alias . The Create Alias dialog box is displaye d.
Swi t ch M a n ag e r 58 HP Stor age W or ks 2/8q F ibre C hannel Sw itch Management User Gui de Managing switches This section describes the follo wing tasks that manage switches in the f abric.
Swi t ch M a n ag e r 59 HP Storage W ork s 2/ 8q Fibre Chan nel Switch M anag ement Us er Gu ide Creating user accounts A switch can have a maximum of 15 user accounts. 1. Select Switch > User Accounts . The User Account Administration dialog box is displayed ( Figure 18 ).
Swi t ch M a n ag e r 60 HP Stor age W or ks 2/8q F ibre C hannel Sw itch Management User Gui de Figur e 19: User Account Administration dialog bo x – Remo ve Account Changing a user account passw or d 1. Select Switch > User Accounts . The User Account Administration dialog box is displayed.
Swi t ch M a n ag e r 61 HP Storag e Wor ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Guide Figur e 20: User Account A dministra tion dialog box – Change P ass wor d Modif y ing a user account 1. Select Switch > User Accounts . The User Account Administration dialog box is displayed.
Swi t ch M a n ag e r 6 2 HP Stor age W or ks 2/8q Fibr e Chann el Sw itch Managemen t User Gui de 4. Click the Admin A uthority Enabled check box to grant admin authority to the account name. 5. Select an option from the Account Expiration Date area.
Swi t ch M a n ag e r 63 H P Storage W orks 2/ 8q Fibre Chann el Switch Ma nage ment Us er Gu ide Name Ser ver data w indow The Name Server data windo w displays informa tion about the de vices that are logged into the fabric.
Swi t ch M a n ag e r 64 HP St or age W or ks 2/8q F ibr e Channel S w itch Managemen t Use r Guide Link data w indow The Link data windo w displays information about all switch links in the f abric or selected links. This information includes the switch name, the port number at the end of each link, and the link status.
Swi t ch M a n ag e r 65 HP Storage W orks 2/ 8q F ibre Cha nnel Switch M ana gement User G uide P or t Information data w indow The Port Information data windo w displays port detail information for th e selected ports. T o open the Port Statistics data windo w , click the Port Info tab below the data windo w in the facepl ate display .
Swi t ch M a n ag e r 66 HP Stor age W or ks 2/8q F ibre C hannel Sw itch Management User Gui de Configurin g por t threshold alarms Y ou can configure the switch to generate alar ms for selected e vents.
Swi t ch M a n ag e r 67 HP St or ag e W orks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Gu ide Figur e 25: P or t Thr eshold Alarm e xample 7. Enter a sample windo w in seconds. The sample windo w def ines the period of time in which to count e vents.
Swi t ch M a n ag e r 68 HP Stor age W or ks 2/8q F ibre C hannel Sw itch Management User Gui de Setting the date/time and NTP c lient The Date/T ime and Netw ork T ime Protocol (NTP) dialog box enables you to set the date and time manually on a switch, or to enable NTP C lient to synchronize the date and time on the switch with an NTP server .
Swi t ch M a n ag e r 69 HP Storage W ork s 2/ 8q Fibre Chan nel Switch M anag ement Us er Gu ide Configuration w iz ard The Conf iguration wizard is a series of dialog box es you can use to conf igure the IP address and other basic parameters on ne w or replacem ent switches.
Swi t ch M a n ag e r 7 0 HP Stor age W or ks 2/8q Fibr e Chann el Sw itch Managemen t User Gui de Administrati ve State parameter The switch administrati ve state determines the operational state of the switch. The switch administrati ve state exists in two forms: the configured administrati ve state and the current administrati ve state.
Swi t ch M a n ag e r 71 HP Storag e Wor ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Guide the broadcast is in a hard zone, the frame is re transmitted on all online F_Ports within the hard zone. If the originator of the broadcast frame is not in a hard zone, th e f rame is retransmitted on online F_Ports that are not in a hard zone.
Swi t ch M a n ag e r 7 2 HP Stor age W or ks 2/8q Fibr e Ch annel Sw itch Managemen t User Gui de Net wor k properties Use the Network Properties dialog box to change the follo wing netw ork settings: ■ IP Configuration parameters ■ SNMP Conf iguration parameters ■ SNMP T rap Conf iguration ■ Remote Logging parameter 1.
Swi t ch M a n ag e r 73 HP Storage W or ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Gu ide SNMP Configuration par ameters The SNMP conf iguration def ines ho w authentication traps are managed. Ta b l e 1 6 describes the SNMP configuration parameters.
Swi t ch M a n ag e r 7 4 HP Stor age W or ks 2/8q Fibr e Ch annel Sw itch Managemen t User Gui de SNMP T rap Configur ation The SNMP trap conf iguration def ines ho w traps are set. Choose from the tabs T rap1 – T rap 5 to configure each trap. Ta b l e 1 7 describe s the SNMP configuration parameters.
Swi t ch M a n ag e r 75 H P Storage W orks 2/ 8q Fibre Chan nel Switch M anag ement Us er Gu ide T o sa ve log information to a remote host, you must edit the syslog.conf f ile (located on the remote host) and then restart the sysl og daemon. Consult your operating syste m documentation for information on ho w to configure Remote Logging.
Swi t ch M a n ag e r 7 6 HP Stor age W or ks 2/8q Fibr e Ch annel Sw itch Managemen t User Gui de Figur e 28: Restor e dialog box es – Full and Selecti ve 3. Enter the archiv e f ile name or browse for the file. This archi ve f ile must be one that was produced by the Switch Manager Archi ve func tion.
Swi t ch M a n ag e r 77 HP St orage W ork s 2/ 8q Fibre Chan nel Switch M anage ment Us er Gu ide Rest oring the factor y default configur ation Y ou can restore the switch and por t conf iguration settings to the factory default v alues. T o restore the factory configuration on a switch, select Switch > Restore Factory Defaults .
Swi t ch M a n ag e r 7 8 HP Stor age W or ks 2/8q Fibr e Chann el Sw itch Managemen t User Gui de Do wnloading a support file The Down load Support File menu option assembles all log f ile s and switch memory data into a core dump file ( dump_support.
Swi t ch M a n ag e r 79 HP Storage W ork s 2/ 8q Fibre Chan nel Switch M anag ement Us er Gu ide Display ing hard war e status T o display a summary of the hardw are status info rmation in a popup te xt box, rest the cursor ov er the chassis LED cluster in the faceplate display .
Swi t ch M a n ag e r 80 HP Stor age W or ks 2/8q Fibr e Channel S w itch Managemen t User Guide Managing por ts This section describes the follo wing tasks that manage ports and de vices: ■ Display.
Swi t ch M a n ag e r 81 HP Storag e Wor ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Guide Display ing port types T o display port ty pe status, select V iew > View Port T ypes .
Swi t ch M a n ag e r 8 2 HP Stor age W or ks 2/8q Fibr e Chann el Sw itch Managemen t User Gui de P or t Statistics data windo w The Port Statistics data window displays statis tics about port performance.
Swi t ch M a n ag e r 83 H P Storage W orks 2/ 8q Fibre Chann el Switch Ma nage ment Us er Gu ide FBus y Num ber of cla ss 3 fabr ic bu sy (F_BS Y) fr ames gener ated by this port in r esponse to incoming fr ames . This u sually indi cates a bus y conditio n on the f abr ic or N_port that is p re v enting deli v ery of this fr ame .
Swi t ch M a n ag e r 84 HP Stor age W or ks 2/8q Fibr e Channel S w itch Managemen t User Guide P or t Information data w indow The Port Information data windo w displays port detail information for the selected port. T o open the Port Information data windo w , click the Por t In fo tab belo w the data windo w in the facep late display .
Swi t ch M a n ag e r 85 H P Storage W orks 2/ 8q Fibre Chann el Switch Ma nage ment Us er Gu ide Name Ser ver data w indow The Name Serv er data window displays informa tion about de vices (hosts and storage tar gets) connected to the switch.
Swi t ch M a n ag e r 86 HP Stor age W or ks 2/8q F ibre C hannel Sw itch Management User Gui de P or t States parameters The port administrati ve state determines the oper ational state of a port.
Swi t ch M a n ag e r 87 HP Storage W or ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Gu ide P or t T ype par ameters The ports can be conf igured to self-discov er the proper type to match the de vice or switch to which it is connected. Ta b l e 2 7 describes the p ort types.
Swi t ch M a n ag e r 88 HP Stor age W or ks 2/8q F ibre C hannel Sw itch Management User Gui de 3. Select one of the follo wing in th e Port Symbolic Name dialog box: — Enter a new name for the port in the Set Port Symbolic Name box. — Check the Restore Default Port Symbolic Name ch eck box to restore the def ault name.
Swi t ch M a n ag e r 89 H P Storage W orks 2/ 8q Fibre Chan nel Switch M anag ement User Gu ide 4. V erify Re quested Changes—Revie w the exte nded distance requests and the selected donor ports. Click Finish to apply the changes, and redistribute the credits.
Swi t ch M a n ag e r 90 HP Stor age W or ks 2/8q F ibre C hannel Sw itch Management User Gui de Figur e 33: P or t Loopback Test dialog bo x 2. Select the type of loopback tes t to be run ( Internal , Exter nal , or Online ) in the Te s t Selection area.
Swi t ch M a n ag e r 91 HP Storag e Wor ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Guide Graphing port per f ormance The HP Storag eW orks Fa bric V iew application display s port performance using graphs. HP StorageW orks Fabric V iew plots data commu nica tion rates and total errors for selected ports as sho wn in Figure 34 .
Swi t ch M a n ag e r 92 HP Stor age W or ks 2/8q F ibre C hannel Sw itch Management User Gui de Exiting HP Stor age W orks F abric V iew T o e xit a HP StorageW orks Fabric V ie w session, select File > Exit .
Swi t ch M a n ag e r 93 HP St or ag e W orks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Gu ide Files are sav ed in the working directory . 3. Enter a password. When you attempt to open this fabric f ile, yo u are prompted fo r this password. If you lea ve the File Password box blank, no password is required.
Swi t ch M a n ag e r 9 4 HP Stor age W or ks 2/8q Fibr e Ch annel Sw itch Managemen t User Gui de Displa ying gr aphs 1. Select Fabric > Add Fabric . The Add a Ne w F abric dialog box is displayed. 2. Enter a fabric name and an IP ad dress. 3. Enter an accoun t name and a password, if required.
Swi t ch M a n ag e r 95 HP Storage W orks 2/ 8q F ibre Cha nnel Switch M ana gement User G uide Figur e 38: Default Graph Options dialog bo x Y ou can also right-click on a graph, and then sele ct Change Graph Options . 1. Choose the units for the graph: — Select the Show Bytes Data on Graph check box to plot data in KBytes/second.
Swi t ch M a n ag e r 9 6 HP Stor age W or ks 2/8q Fibr e Chann el Sw itch Managemen t User Gui de Note: Clicking Res et in the S w atch es, HS B, and R GB tab pa ges of t he Select C olor di alog bo x r esets the colors in the Pre vie w area to the last saved color scheme.
Swi t ch M a n ag e r 97 HP Storage W ork s 2/ 8q Fibre Chan nel Switch M anag ement Us er Gu ide Interpr eting S witch M anage r messages This section lists the Switch Ma nager messages b y task, dialog box, or display .
Swi t ch M a n ag e r 9 8 HP Stor age W or ks 2/8q Fibr e Ch annel Sw itch Managemen t User Gui de Net wor k Properties dialog bo x messages The max imum number of manageme nt sessio ns on the entry s wit ch has been ex ceeded . The a pplicati on cannot esta blish a session w ith the f abr i c becau se too man y sessi ons ar e alread y open.
Swi t ch M a n ag e r 99 HP Storage W or ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Guide S witch Properties dialog bo x messages T able 31: Switch Properties dialog box messages Messag e User action Atte mpt to cha nge chas sis name faile d . or Atte mpt to se t in -ba nd ma nage ment faile d.
Swi t ch M a n ag e r 100 HP Stor age W or ks 2/8q Fibr e C hannel Sw itch Management User Gui de Out of range domain ID spec ifi ed. V erify th at all infor mati on is vali d and r etry the conf igur ation c hange . Consult t he docu mentat ion for valid c onfigu rations.
Swi t ch M a n ag e r 101 HP Storag e Wor ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Guide P or t Pr oper ties dialog bo x messages T able 3 2: P ort Properties dialog box messages Messag e User action Inv ali d value en ter ed fo r inter op c r edits.
Swi t ch M a n ag e r 102 HP Stor age W orks 2/8q F ibr e Channel S w itch Managemen t User Guide Faceplate displa y messages Unable to ap ply chan ges.
Swi t ch M a n ag e r 103 HP Storage W or ks 2/8 q Fibre Chann el Switch Ma nage ment Us er Gu ide One of the selec ted ports is cur r entl y in use as a do nor p ort to al low for extend ed cred its on another port . Modificati ons to donor ports are not permitted.
Swi t ch M a n ag e r 104 HP Stor age W or ks 2/8q Fibr e C hannel Sw itch Management User Gui de Load F irm war e dialog bo x messages P ort Loopbac k T est dialog box messages T able 34: Load Firm ware dialog box messages Messag e User action Bad chec ksum/CRC f or the f irm w are image or incorr ect f ir mw ar e image for this type of swi tch.
Swi t ch M a n ag e r 105 HP Storage W orks 2/ 8q Fibre Cha nnel Switch M anag ement User G uide No dev ice detected in selected port yet . T est will no t be run on em pty port. V er ify that a loopback dev ice is attached to the port befor e starting loopback test .
Swi t ch M a n ag e r 106 HP Stor age W or ks 2/8q Fibr e C hannel Sw itch Management User Gui de Extended Credits w iz ar d messages Zoning dialog bo x messages T able 36: Extended Credits wi zard messages Messag e User action Request f or adm in failed.
Swi t ch M a n ag e r 10 7 HP Storage W orks 2/ 8q Fibre Chan nel Switch M anag ement Us er Gu ide No response f r om the switc h. or Sav ing z oning data f ailed .
Swi t ch M a n ag e r 108 HP Stor age W or ks 2/8q Fibr e C hannel Sw itch Management User Gui de Restor e Configur ation dialog bo x messages Sav e Fa bric V iew dialog bo x messag es Unable to cr eate ali as. The z oning confi gurati on alr eady contains the maximum allow ed z oning a liases .
Swi t ch M a n ag e r 109 HP Storage W orks 2/ 8q Fibre Cha nnel Switch M anag ement User G uide T r ap Configur ation dialog bo x messages T able 40: T rap Configuration dialog bo x messages Messag e User action I nva l id ri s i ng t hre s h o l d. or Inv ali d falling thr eshol d.
Swi t ch M a n ag e r 110 HP Stor age W or ks 2/8q Fibr e C hannel Sw itch Management User Gui de.
111 HP Storag e Wor ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Guide 2 Command L ine Inter face The command line interface (CLI) enables you to perform a variety of fabric and switch management tasks thro ugh an Ethernet or a serial po rt connection.
Command L ine Interf ace 112 HP Stor age W or ks 2/8q Fibr e C hannel Sw itch Management User Gui de Logging on to a s w itch T o log on to a switch using a T elnet session, open a command line windo .
Command Line Interf ace 113 HP Storag e Wor ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Guide W orking with sw itc h configurations Successful management of switches and fabric s with the command line interface depends on the effecti ve use of switch configurations.
Command L ine Interf ace 114 HP Stor age W or ks 2/8q Fibr e C hannel Sw itch Management User Gui de Backing up a switch configuration Backing up and res toring a configuration is useful to prot ect your work or for use a s a template in conf iguring other switches.
Command Line Interf ace 115 HP Storag e Wor ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Guide Restor ing a sw itch configuration The restore operatio n begins with FTP to upload the configuration file from the w orkstation to the switch, and then finishes with a T elnet session and the Config Restore command.
Command L ine Interf ace 116 HP Stor age W or ks 2/8q Fibr e C hannel Sw itch Management User Gui de Commands The command is followed b y on e or more keyw ords. Cons id er the follo wing rules and con v entions: ■ Commands and keyw ords are case insensitiv e.
Command Line Interf ace 117 HP Storag e Wor ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Guide Admin command Opens and closes an Admin session. The Admin session provides commands that change the fabric and switch conf igurations. Only one Ad min session can be open on the switch at an y time.
Command L ine Interf ace 118 HP Stor age W or ks 2/8q Fibr e C hannel Sw itch Management User Gui de Ex amples The follo wing example sho ws ho w to open and close an Admin session: 2/8q FC Switch #> admin start 2/8q FC Switch (admin) #> .
Command Line Interf ace 119 HP Storag e Wor ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Guide DELETE [ALIAS] Deletes the specif ied alias giv en by [ali as] from the zoning database. If the alias is a member of the acti ve zone set, the ali as w ill not be remo ved from the acti ve zone set until the acti ve zone set is deacti v ated.
Command L ine Interf ace 120 HP Stor age W or ks 2/8q Fibr e C hannel Sw itch Management User Gui de COPY [config_source] [config_destina tion] Copies the configuration giv en by [confi g_source] to the configuration gi v en by [confi g_destination]. The switch supports up to 10 conf igurations includ ing the default conf iguration.
Command Line Interf ace 121 HP Storag e Wor ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Guide 2/8q FC Switch (admin-config) #> con fig cancel Configuration mode will be cancele d.
Command L ine Interf ace 122 HP Stor age W orks 2/8q F ibr e Channel S w itch Managemen t User Guide Create Support command Assembles all log files and switch memo ry data int o a core dump f ile ( dump_support.tgz zip ) and prompt s you to send it to a remote host .
Command Line Interf ace 12 3 HP Storage W orks 2 /8q F ibre Cha nnel Sw itch Mana gement User Guide Remote system type is UNIX. Using binary mode to transfer files. 221-You have transferred 43430 bytes in 1 files. 221-Total traffic for this session w as 43888 bytes in 1 transfers.
Command L ine Interf ace 12 4 HP Stor age W or ks 2/8q Fibr e Chann el Sw itch Managemen t User Gui de Ex amples 2/8q FC Switch (admin) #> firmware i nstall Warning: Installing new firmware re quires a switch reset. Continuing with this action will te rminate all management sessions, including any Telnet sessions.
Command Line Interf ace 125 HP Storage W or ks 2/8 q Fibre Chann el Switch Ma nage ment Us er Gu ide Help command Displays a brief description of the spec if ied command, its ke ywords, and usag e. Authority None Syn t a x HELP [COMMAND] [KEYWORD] Key wo rd s [COMMAND] Displays a summary of the command gi v en by [command ] and its ke ywords.
Command L ine Interf ace 12 6 HP Stor age W or ks 2/8q Fibr e Chann el Sw itch Managemen t User Gui de History command Displays a numbered list of the pre viously entered commands from wh ich you can re-ex ecute selected commands.
Command Line Interf ace 12 7 HP Storage W orks 2 /8q F ibre Cha nnel Sw itch Mana gement User Guide Syn t a x hotreset Notes Y ou can load and activ ate f irmware on an op erating switch without disru.
Command L ine Interf ace 128 HP Stor age W orks 2/8q F ibr e Channel S w itch Managemen t User Guide Notes T o install firmw are when the management workstation has an FTP server , use the Image Install command or the “ Firmware Install command ” on page 123.
Command Line Interf ace 129 HP Storage W orks 2/ 8q Fibre Cha nnel Switch M anag ement User G uide 13. A message prompts you to reset the switch to activ ate the f irmware. Enter the hotreset command to perform a non-dis rupti ve f irmware acti v ation.
Command L ine Interf ace 130 HP Stor age W or ks 2/8q Fibr e C hannel Sw itch Management User Gui de Ping command Initiates an attempt to communic ate with another switch over an Ethernet network and report s the result. Authority None Syn t a x PING Key wo rd s IP_ADDRESS The IP address of the switch to query .
Command Line Interf ace 131 HP Storag e Wor ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Guide 346 327 0.8 00:35:12 3-01:18:35 util 347 327 0.0 00:00:29 3-01:18:35 snmpservicepath 348 327 0.0 00:02:46 3-01:18:34 eport 349 327 0.0 00:00:21 3-01:18:34 PortApp 350 327 5.
Command L ine Interf ace 13 2 HP Stor age W or ks 2/8q Fibr e Chann el Sw itch Managemen t User Gui de Key wo rd s CONFIG [CONFIG_NAME] Resets the conf iguration gi v en by [ config_ name] to the factory defa ult values for switch, port, port threshold alarm, and zoning conf iguration.
Command Line Interf ace 133 HP St or ag e W orks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Gu ide Notes The follo wing tables specify the v arious factory defaul t settings: T able 45: S witch co.
Command L ine Interf ace 134 HP Stor age W orks 2/8q F ibr e Channel S w itch Managemen t User Guide T able 4 7 : P ort threshold alarm configur ation default settings Pa r a m e t e r Default set tin.
Command Line Interf ace 135 HP St or ag e W orks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Gu ide Set command Sets a v ariety of switch parameters.
Command L ine Interf ace 136 HP Stor age W orks 2/8q F ibr e Channel S w itch Managemen t User Guide CONFIG [option] Sets switch, port, port threshold alarm, and zoning conf iguration parameters. See the “ Set Config command ” on p age 137. LOG [option] Specifies the type of entries to be entered in the e vent log.
Command Line Interf ace 13 7 HP Storage W or ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Guide Set Config command Sets switch, port, port thr eshold alarm, and zoning conf igurat ion parameters.
Command L ine Interf ace 138 HP Stor age W orks 2/8q F ibr e Channel S w itch Managemen t User Guide T able 51: Set Config port parameters Pa r a m e t e r Description AdminState P ort admi nistr ativ e state: ■ Online – Acti v ate s and pr epar es t he port to sen d data .
Command Line Interf ace 139 HP Storage W or ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Gu ide SWITCH Initiates an editing session in which to change switch conf ig uration settings. The system displays each paramet er one line at a time and prompts you for a v alue.
Command L ine Interf ace 140 HP Stor age W or ks 2/8q Fibr e C hannel Sw itch Management User Gui de THRESHOLD Initiates a configuration session by which to generate and log al arms for selected e vents. The system displays each e v ent, its triggers, and sampling windo w one line at a time and prompts you for a v alue.
Command Line Interf ace 141 H P Storage W orks 2/ 8q Fibre Chan nel Switch M anag ement User G uide ZONING Initiates an editing session in which to change switch zoni ng attrib utes. The system displays each parameter one line at a time and prompts you for a value.
Command L ine Interf ace 14 2 HP Stor age W or ks 2/8q Fibr e Chann el Sw itch Managemen t User Gui de ExtCredit (dec value, increments of 15, non-loop only) [0 ] FANEnable (True / False) [True ] LCFE.
Command Line Interf ace 143 H P Storage W orks 2/ 8q Fibre Chan nel Switch M anag ement User G uide The follo wing is an example of the SET CONFIG THRESHOLD command: 2/8q FC Switch #> admin start 2.
Command L ine Interf ace 144 HP Stor age W orks 2/8q F ibr e Channel S w itch Managemen t User Guide The follo wing is an example of the SET CONFIG ZONING command: 2/8q FC Switch #> admin start 2/8.
Command Line Interf ace 145 H P Storage W orks 2/ 8q Fibre Chan nel Switch M anag ement Us er Gu ide PORT —Monitors all port e vents. SNMP —Monitors SNMP e vents. SWITCH —Monitors switch management e v ents. ZONING —Monitors zoning conflict e vents.
Command L ine Interf ace 146 HP Stor age W orks 2/8q F ibr e Channel S w itch Managemen t User Guide SAVE Sa ves the log settings for the component, se ve rity lev el, po rt, and display lev el. These settings remain in ef fect after a switch reset. The log settings can be viewed using the Show Log Settings command.
Command Line Interf ace 14 7 H P Storage W orks 2/ 8q Fibre Chann el Switch Ma nage ment Us er Gu ide STATE [STATE] Specifies one of the follo wing administ rativ e states for the specif ied port: Online —Places the port online. This acti v ates and prepares the port to send data.
Command L ine Interf ace 148 HP Stor age W orks 2/8q F ibr e Channel S w itch Managemen t User Guide system Prompts you in a line-by-line fashion to change system conf iguration settings.
Command Line Interf ace 14 9 HP St orage W orks 2/ 8q Fibre Chann el Switch Ma nage ment Us er Gu ide Ex amples The following is an example of the S et Setup SNMP command: 2/8q FC Switch #> admin start 2/8q FC Switch (admin) #> set setup snmp A list of attributes with formatting and current values will follow.
Command L ine Interf ace 150 HP Stor age W orks 2/8q F ibr e Channel S w itch Managemen t User Guide Trap5Address (dot-notated IP Address) [0.0.0.0 ] Trap5Port (decimal value) [162 ] Trap5Severity (se.
Command Line Interf ace 151 H P Storage W orks 2/ 8q Fibre Chan nel Switch M anag ement User G uide alarm [option] Displays the alarm log and session displa y setting. If you omit [option], the command displays the last 200 alarm en tries. The alarm log is cleare d when the switch is reset or po wer cycled.
Command L ine Interf ace 15 2 HP Stor age W or ks 2/8q Fibr e Chann el Sw itch Managemen t User Gui de [ port_id ]—Displays name serv er information for the port giv en by [port_i d]. [port_id] is a port Fibre Channel address. pagebreak Displays the current pagebreak setting.
Command Line Interf ace 153 HP Storage W ork s 2/ 8q Fibre Chan nel Switch M anag ement Us er Gu ide post log Displays the Po wer On Self T est (POST) log which contains re sults from the POST . setup [option] Displays setup attributes for the system, SNMP , and the switch manufacturer .
Command L ine Interf ace 154 HP Stor age W orks 2/8q F ibr e Channel S w itch Managemen t User Guide support Executes a series of commands that display a complete description of the switch, its configuration, and operation. The displ ay can be capture d from the screen and used for diagnosing problems.
Command Line Interf ace 15 5 H P Storage W orks 2/ 8q Fibre Chan nel Switch M anag ement User Gu ide The follo wing is an example of the Show Domains command: 2/8q FC Switch #> show domains Princip.
Command L ine Interf ace 156 HP Stor age W orks 2/8q F ibr e Channel S w itch Managemen t User Guide The follo wing is an example of the Show NS [port_ID] command: 2/8q FC Switch #> show ns 1301e1 .
Command Line Interf ace 15 7 HP Storage W or ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Guide The follo wing is an example of the Show Port command: 2/8q FC Switch #> show port 1 Port Number.
Command L ine Interf ace 158 HP Stor age W orks 2/8q F ibr e Channel S w itch Managemen t User Guide The follo wing is an example of the Show Switch command: 2/8q FC Switch #> show switch Switch Information ------------------ SymbolicName 2/8q FC Switch SwitchWWN 10:00:00:c0:dd:03:cf:cc SwitchType 2/8q FC Switch BootVersion V1.
Command Line Interf ace 15 9 H P Storage W orks 2/ 8q Fibre Chann el Switch Ma nage ment Us er Gu ide The follo wing is an example of the Show Topology command for port 1: 2/8q FC Switch #> show to.
Command L ine Interf ace 160 HP Stor age W orks 2/8q F ibr e Channel S w itch Managemen t User Guide The follo wing is an example of the Show Version command: 2/8q FC Switch #> show version *******.
Command Line Interf ace 161 H P Storage W orks 2/ 8q Fibre Chan nel Switch M anag ement User G uide LinkSpeed Auto PortType GL SymbolicName Port3 ALFairness False DeviceScanEnabled True ForceOfflineRS.
Command L ine Interf ace 16 2 HP Stor age W or ks 2/8q Fibr e Chann el Sw itch Managemen t User Gui de The follo wing is an example of the Show Config Threshold command: 2/8q FC Switch #> show conf.
Command Line Interf ace 163 H P Storage W orks 2/ 8q Fibre Chan nel Switch M anag ement Us er Gu ide Show Log command Displays the contents of the log or the parameters used to create and display entries in the log. The log contain s a maximum of 1200 entries.
Command L ine Interf ace 164 HP Stor age W orks 2/8q F ibr e Channel S w itch Managemen t User Guide Displays the options that are av ailable f o r configuri ng ev ent logging and automatic display to the screen. See the “ Set Log Command ” on page 144 for informat ion about ho w to configure ev ent logging and display le vel.
Command Line Interf ace 16 5 HP St orage W orks 2/ 8q Fibre Chann el Switch Ma nage ment Us er Gu ide [333][day month date time year][I][Eport Port : 0/8][Sending LSU oxid=0xc:type=1] [334][day month .
Command L ine Interf ace 166 HP Stor age W orks 2/8q F ibr e Channel S w itch Managemen t User Guide Ex amples The follo wing is an example of the S how Perf command: 2/8q FC Switch #> show perf Po.
Command Line Interf ace 16 7 HP Storage W or ks 2/8 q Fibre Chann el Switch Ma nage ment Us er Gu ide Key wo rd s MFG Displays manufacturing in formation about the switch. SNMP Displays the current SNMP settings. SYSTEM Displays the current system settings.
Command L ine Interf ace 168 HP Stor age W orks 2/8q F ibr e Channel S w itch Managemen t User Guide Trap1Enabled False Trap2Address 0.0.0.0 Trap2Port 162 Trap2Severity warning Trap2Version 2 Trap2Enabled False Trap3Address 0.0.0.0 Trap3Port 162 Trap3Severity warning Trap3Version 2 Trap3Enabled False Trap4Address 0.
Command Line Interf ace 16 9 H P Storage W orks 2/ 8q Fibre Chann el Switch Ma nage ment Us er Gu ide Shutdown command T erminates all data transfers on the switch at con venient points and closes the T elnet session. Alwa ys po wer cycl e the switch afte r entering this co mmand.
Command L ine Interf ace 17 0 HP Stor age W or ks 2/8q Fibr e Chann el Sw itch Managemen t User Gui de 2. Place the port in Diagnostics mode by entering the following command ( x = port number): set port x state diagnostics 3.
Command Line Interf ace 171 H P Storage W orks 2/ 8q Fibre Chan nel Switch M anag ement User G uide Uptime command Displays the elapsed up time since the switch wa s last reset and reset method. A hot reset or non-disrupti v e firmw are activ ation does not reset the elapsed up time reported by this command.
Command L ine Interf ace 17 2 HP Stor age W or ks 2/8q Fibr e Chann el Sw itch Managemen t User Gui de EDIT Initiates an edit session that prompts you for the account na me for which to change the expi ration date and authority . LIST Displays the list of users currently logged in and their session numbers.
Command Line Interf ace 17 3 HP St orage W ork s 2/ 8q Fibre Chann el Switch M anage ment Us er Gu ide The follo wing is an example of the User Edit command: 2/8q FC Switch (admin) #> user edit Press 'q' and the ENTER key to abort this command.
Command L ine Interf ace 17 4 HP Stor age W or ks 2/8q Fibr e Chann el Sw itch Managemen t User Gui de Zone Command Manages zones and zone membership on a switch. Authority Admin and a Zoning Edit. See t he “ Zoning command ” on page 178 for information about starting a Zoning Edit session.
Command Line Interf ace 17 5 H P Storage W orks 2/ 8q Fibre Chann el Switch Ma nage ment Us er Gu ide REMOVE [zone] [member_list] Remov es the ports/de vices gi ven b y [member_list] from the zone gi v en by [zone]. Use a <space> to de limit aliases and port s/devices in [member_ list].
Command L ine Interf ace 17 6 HP Stor age W or ks 2/8q Fibr e Chann el Sw itch Managemen t User Gui de wwn_c001b0 zone_set_1 wwn_401248 zone_set_1 wwn_02402f zone_set_1 wwn_22412f zone_set_1 The follo.
Command Line Interf ace 177 H P Storage W orks 2/ 8q Fibre Chan nel Switch M anag ement Us er Gu ide ACTIVE Displays the name of the acti v e zone set. This ke yword do es not require Admin session. ADD[zone_set] [zone_list] Adds a list of zones and aliases gi ven b y [zone_list] to the zo ne set giv en b y [zone_set].
Command L ine Interf ace 17 8 HP Stor age W or ks 2/8q Fibr e Chann el Sw itch Managemen t User Gui de The follo wing is an example of the Zoneset List command: 2/8q FC Switch #> zoneset list Curre.
Command Line Interf ace 17 9 H P Storage W orks 2/ 8q Fibre Chann el Switch Ma nage ment Us er Gu ide HISTORY Displays a history of zoning mod ifications.
Command L ine Interf ace 180 HP Stor age W or ks 2/8q Fibr e C hannel Sw itch Management User Gui de Ex amples The follo wing is an example of the Zoning Edit command: 2/8q FC Switch #> admin start 2/8q FC Switch (admin) #> zoning edi t 2/8q FC Switch (admin-zoning) #> .
Command Line Interf ace 181 H P Storage W orks 2/ 8q Fibre Chan nel Switch M anag ement User G uide 13 Q_2_Photon_2 MaxMembersPerAlias 2000 2 AliasInAZone The follo wing is an example of the Zoning Li.
Command L ine Interf ace 18 2 HP Stor age W or ks 2/8q Fibr e Chann el Sw itch Managemen t User Gui de wwn_23bd31 50:06:04:82: bf:d2:18:c2 50:06:04:82: bf:d2:18:d2 10:00:00:00: c9:23:bd:31 wwn_221416 .
183 H P Storage W orks 2/ 8q Fibre Chan nel Switch M anag ement Us er Gu ide Index Index Index A access control list zone 46 , 56 account name 37 , 112 , 173 display 173 active zone set 44 , 46 , 71 A.
Inde x 184 HP Stor age W or ks 2/8q Fibr e C hannel Sw itch Management User Gui de D data window Active Zoneset 44 Configured Zonesets 65 description 31 , 32 , 34 Name Server 63 port information 84 po.
Inde x 185 H P Storage W orks 2/ 8q Fibre Chan nel Switch M anag ement Us er Gu ide generic port 81 , 87 generic port 81 , 87 getting help 18 graphic window 30 H hard reset 68 Hardreset comm and 124 h.
Inde x 186 HP Stor age W orks 2/8q F ibr e Channel S w itch Managemen t User Guide counters 146 displaying information 80 external test 169 initialize 132 internal test 169 loopback test 169 mode 81 o.
Inde x 18 7 HP Storage W or ks 2/8 q Fibre Chann el Switch Ma nagem ent Use r Guide symbolic name 69 symbols in text 15 symbols on equipment 16 syslog 74 system configuration change 148 display 167 T .
Inde x 188 HP Stor age W orks 2/8q F ibr e Channel S w itch Managemen t User Guide list definitions 179 remove all 53 revert changes 179 save edits 179 Zoning command 178.
An important point after buying a device HP (Hewlett-Packard) 2/8q Fibre Channel (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP (Hewlett-Packard) 2/8q Fibre Channel yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP (Hewlett-Packard) 2/8q Fibre Channel - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP (Hewlett-Packard) 2/8q Fibre Channel you will learn all the available features of the product, as well as information on its operation. The information that you get HP (Hewlett-Packard) 2/8q Fibre Channel will certainly help you make a decision on the purchase.
If you already are a holder of HP (Hewlett-Packard) 2/8q Fibre Channel, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP (Hewlett-Packard) 2/8q Fibre Channel.
However, one of the most important roles played by the user manual is to help in solving problems with HP (Hewlett-Packard) 2/8q Fibre Channel. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP (Hewlett-Packard) 2/8q Fibre Channel along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center