Instruction/ maintenance manual of the product 2.5 HP (Hewlett-Packard)
Go to page of 19
Whereis® Navigator for HP iPa q Devices with In-Built GPS Installation Guide Document Version 2.5 Updated : 16 May 2006 Sensis Pty Ltd 222 Lonsdale Street Melbourne VIC 3000 www.sensis.com.au COPYRIGHT © Sens is Pty ltd 2004 – A LL RIGHTS RES ERVED This information is provided fo r your p ersonal, non-com mercial use on ly.
Whereis® Navigator Installation Guide for HP iPaq with In-Bui lt GPS - version 2.5 Page 2 Contents 1 GENERAL .................................................................................................... 3 1.1 Acknowledgements .................
Whereis® Navigator Installation Guide for HP iPaq with In-Bui lt GPS - version 2.5 Page 3 1 GENERAL Congratulations on selecting one of Aust ralia’ s leading veh icle navigation solut ions! Know where you are and where you are going with Whereis ® Navigator.
Whereis® Navigator Installation Guide for HP iPaq with In-Bui lt GPS - version 2.5 Page 4 1.1 Acknowledgements UBD and the UBD logo are registered trade marks of Un iversal Publishers P ty Ltd. UBD maps are used by Sensis under lic en se from Universal Publishers P ty Ltd.
Whereis® Navigator Installation Guide for HP iPaq with In-Bui lt GPS - version 2.5 Page 5 1.3 Equipment Required The following important components are re quired to operate Whereis® Navigator: A HP iPaq with an in-built GP S Receiver, ie hw6515 or hw6965.
Whereis® Navigator Installation Guide for HP iPaq with In-Bui lt GPS - version 2.5 Page 6 2 SOFTWARE INSTALLATION 2.1 Quickstart for Activesync® Installation This is a brief step-b y-step process for the installat ion of Whereis® Navigator u sing Microsoft Activesync®.
Whereis® Navigator Installation Guide for HP iPaq with In-Bui lt GPS - version 2.5 Page 7 2.2 Installation via Activesync® Make sure the HP iPaq is in serted in the cradle or connected via the cable and Microsoft Activesync® i s active ( gr een ).
Whereis® Navigator Installation Guide for HP iPaq with In-Bui lt GPS - version 2.5 Page 8 To install Whereis® Navigator, you will need to read and accept the terms of the license agreement. If you agree, click the appropriate radio button and then click ‘Next’ .
Whereis® Navigator Installation Guide for HP iPaq with In-Bui lt GPS - version 2.5 Page 9 On your HP iPaq, Press ‘Yes’ to accept the default application install directory. Note: Advanced users may choose a different location but the SD Card should not be chosen as the voice instructions may be muted.
Whereis® Navigator Installation Guide for HP iPaq with In-Bui lt GPS - version 2.5 Page 10 2.3 Quickstart for Direct Phone Installation This is a step-by-step process for the instal lation of Whereis® Navigator directly on your phone instead of using Ac tivesync®.
Whereis® Navigator Installation Guide for HP iPaq with In-Bui lt GPS - version 2.5 Page 11 2.4 Installation directly on the Phone In some cases, it may be easier to inst all Whereis® Navigator directly on your HP iPaq, rather than via A ctivesync®.
Whereis® Navigator Installation Guide for HP iPaq with In-Bui lt GPS - version 2.5 Page 12 The software w ill now inst all. Once installed, you will have to start the application and configure t he license key before you can use Wherei s® Navigator.
Whereis® Navigator Installation Guide for HP iPaq with In-Bui lt GPS - version 2.5 Page 13 Please read the disclaimer carefully by scrolling. Once you have read it to the bottom, you can ‘ Accept’ to conti nue or ‘ Decline’ if you do not agree.
Whereis® Navigator Installation Guide for HP iPaq with In-Bui lt GPS - version 2.5 Page 14 3 PERSONALISE YOUR CONFIGURATION 3.1 Personalise your Configuration The configuration sect ion allows you to ch ange the way Whereis® Navigator operates and can be configured to operate with di fferent settings for maps, a udio and route functions.
Whereis® Navigator Installation Guide for HP iPaq with In-Bui lt GPS - version 2.5 Page 15 you are operating in poor coverage areas o r d o n o t n e e d a s m u c h i n f o r m a t i o n , y o u can decrease this. Refer to the FAQ section in the User Guide for more information.
Whereis® Navigator Installation Guide for HP iPaq with In-Bui lt GPS - version 2.5 Page 16 The ‘GPS’ Tab is where you confi gure the GPS communications. When the software is installed on t he HP iPaq it w ill defau lt to the built in GP S Receiver.
Whereis® Navigator Installation Guide for HP iPaq with In-Bui lt GPS - version 2.5 Page 17 4 GPS CONFIGURATION 4.1 Using the HP iPaq with In-Built GPS Your HP iPaq h as an in-built GPS Receiv er. To set up your GPS Receiver for operation, please follow these important instructions t o en sure it ca n locate your positio n as quickly as possible.
Whereis® Navigator Installation Guide for HP iPaq with In-Bui lt GPS - version 2.5 Page 18 4.2 Advanced Settings GPS Quick Connection Utility You can configu re the HP GP S Qu ick Connect ion Utility to aut omatically updat e the GPS information ev ery 2 days using a GPRS conn ect ion.
Whereis® Navigator Installation Guide for HP iPaq with In-Bui lt GPS - version 2.5 Page 19 5 NEED MORE INFORMATION? Information specific to th e HP iPaq can be found at http://www.hp.com. au . In some cases you may want fur ther inform ation on Whereis® Navigator.
An important point after buying a device HP (Hewlett-Packard) 2.5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP (Hewlett-Packard) 2.5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP (Hewlett-Packard) 2.5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP (Hewlett-Packard) 2.5 you will learn all the available features of the product, as well as information on its operation. The information that you get HP (Hewlett-Packard) 2.5 will certainly help you make a decision on the purchase.
If you already are a holder of HP (Hewlett-Packard) 2.5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP (Hewlett-Packard) 2.5.
However, one of the most important roles played by the user manual is to help in solving problems with HP (Hewlett-Packard) 2.5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP (Hewlett-Packard) 2.5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
