Instruction/ maintenance manual of the product WMM65 Hotpoint
Go to page of 28
For everyone you’ll ever be WMA66 WMM65 WMA64 Installation and User Instructions for the Ultima Range.
C ongr atula tions on choosing Ultima!! 2 Adjustable feet Dispenser drawer Hot water inlet point and attached hose (grey) Col d wa te r inlet point and attached hose (blue) Hooked end support Drainage.
The f ollowing instruc tions and information will help y ou to get the most out of your ne w machine... Safety first! Installing y our machine A typical wash progr amme T he dispenser Cleaning and mai.
Safety first ● Dispose of packaging materials carefully and keep them w ell aw ay from children. ● When disposing of y our old machine , to minimise risk of injury to children, isolate fr om the elec trical supply , remo ve the door , the plug and cut the mains cable off flush with the appliance .
1. Choose a location... Where y ou install the machine will affect its per formance. ● F or your safety and to comply with electrical regulations , seek professional advic e if you wan t to install your machine in a bath or sho wer room. ● Make sure that the electr ical socket and water taps are easily accessible.
6 Hold the transit bolt and slide to the side and then pull out. The bolt and spacer should be remov ed intact. (see below) Using a screw driver , remov e the screw to release the plastic co ver . F irstly , unhook the grey drainage hose and proceed as f ollows , tak ing care not to loosen the hot and cold wat er fill hoses.
Make sure that the electr ical socket is accessible. T ake the mains lead from the back of the machine and plug it into the socket. W e do not rec ommend wiring your machine directly into the mains supply . Changing the mains lead If you hav e damaged the existing lead and need a new one, contact Hotpoint Ser vice UK on 08709 066066 or www .
Hot and cold fill 1 Unclip the gr ey and blue fill hoses from the back of the machine. 2 Connect the free end of the grey fill hose to the HO T water supply (see figure1). Connect the free end of the blue fill hose to the C OLD water supply . 3 T urn on your wat er supply and check for leaks .
● T ak e care when you remo ve the drain hose from the clips on the back of the machine. All machines are tested with wa ter before they lea ve the factor y so a small amount of water may still be in the hose. ● Do not remov e the hooked end suppor t from the GREY drainage hose when using any of the dr ainage methods detailed below .
7.A djust the feet ... Once the machine is in plac e 10 6. Mov e the machine into position... Y our machine is heavy so care must be taken when moving it. T o help you we hav e fitted wheels to the bottom rear of the machine. ● When moving the machine , take care not to kink or damage the hoses at the back of machine.
U sing y our machine 11 The rest of this instruction book will help you to make the most of your new w ashing machine. W e have cr eated the machine f or the way y ou live, by lis tening t o people just like you who use our products. Y ou will find that your new machine has many useful featur es and is easy to use.
Sor t your laundr y into groups b y washcare labels. Load the machine , making sure that clothes are not trapped in the door . Close the washing machine door b y pushing it until it clicks.
Choose a suitable deter gent ● F ollow the detergent manufacturer ’ s recommendations to mak e sur e you use the correct amount for y our wash. ● T o achieve the best wash results , the water har dness, degree of soiling and load size need to be c onsidered and the recommended amount of det ergent used .
When you ar e using the pre-wash option with your selected programme add detergent t o the pre-wash compar tment ( l symbol). Add the deter gent for the main wash to the main compar tment ( ll symbol). Dispensing liquid detergen t The liquid retaining flap is preset for adding powder det ergent.
Door Locked Indicat or ... ‘Red Ke yhole ’ symbol The ‘ Red K eyhole ’ symbol will illuminate 2 seconds after you ha ve pressed the ‘ Star t ’ button and will remain lit throughout the wash progr amme. The ‘ Red K eyhole ’ symbol will be flashing at the end of the programme to indica te that the door is still locked .
W ash progr ammes Spin speed (rpm) W ash T emp ˚C W ash Label Press Button Display Window shows F abric 5.5kg White cotton and linen without special finishes 95 5.
W ash progr ammes 17 PROGRAMMES & OPTIONS 1.5kg W ool mix tures with cotton or ray on. 40 2.5kg Shrink resistant machine washable wool, woollen blankets.
W ash progr ammes 18 PROGRAMMES & OPTIONS 1kg F or freshening up lightly soiled items. W arning : not for woollen, silk or delicate items . 35 Once 800 Spin speed (rpm) W ash T emp ˚C W ash Label Pr ess Button Display Window shows F abric F abric type - Cottons, F ast W ash Maximum dry weight load 5.
Options 19 Choosing an option button The f eatures listed belo w are all av ailable with any wash progr amme selected . F av orite Programme ● This option allo ws y ou to store y our fav orite programme for wh en you ne x t want to use it. Only one progr amme can be stored in thi s function.
20 Options PROGRAMMES & OPTIONS Any of the f ollowing optional wash featur es can be selected af t er the wash programme selection, with the ex ception of ‘F ast F or ward’ , which can only be activated after the wash programme has started.
Options Rinse Hold ● This option holds clothes in the final rinse w ater , keeping them fresh until y ou are ready to c omplete the programme T o use this option press the ‘R inse Hold’ button once , illuminates in the display window abo ve the ‘R inse Hold’ option button.
Options The f ollowing options can be selected to alter the natur e of th e chosen wash programme b y changing the spin speed , number of rinses or the programme temper ature . T o choose a control option press the option button and scroll thr ough the option menu ’ s, follo wing the display window pr ompts.
Clean and dr y the dispenser draw er , syphons, grate and fabric conditioner exit channel. Regularly clean the outlet pipe area. Removing and cleaning the dispenser dra wer and compartments Note: Y ou should clean the dispenser dra wer r egularly .
T roubleshooting ... The machine will not start... ● Close the door . Check that the machine has power . Choose a pr ogramme and press the ‘ ST ART ’ button. Check to see if a ‘R ed Keyhole ’ symbol is flashing in the display window , if so, see below .
T roubleshooting ... The ‘ Time to End’ display jump ... ● The estimated pr ogramme times are dependant on the tempera ture and pressure of the incoming w ater supply , the option(s) selected and the load being washed .
26 Hotpoint guar antee “Satisfaction guaranteed or y our money back” W e give you a unique ‘ satisfaction guaranteed’ promise - valid for 90 da ys - after you ha ve pur chased your Hotpoint product. If there is a technica l problem simply call Hotpoint Repair ser vice or visit our web-site a t www .
SERVICE & GU AR ANTEE 27 A f ter sales ser vice “No compan y is better positioned to offer an after sales ser vic e on a Hotpoint appliance than us - the manufacturer” As par t of our commitment to y ou, all Hotpoint appliances hav e the added benefit of a fully inclusive parts and labour guarantee for the first 12 mon ths.
K ey c ontac ts After Sales Ser vice Over 1200 trained specialists, direc tly employed b y us, ensure th at you can hav e complete confidence in both the appliances and services we offer . Repair Ser vice and Informa tion Help Desk UK: 08709 066 066 (Open 8 to 8 Mon - F r i, 8 to 6 Sat, 10 to 4 Sun & Bank Holidays) www .
An important point after buying a device Hotpoint WMM65 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hotpoint WMM65 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hotpoint WMM65 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hotpoint WMM65 you will learn all the available features of the product, as well as information on its operation. The information that you get Hotpoint WMM65 will certainly help you make a decision on the purchase.
If you already are a holder of Hotpoint WMM65, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hotpoint WMM65.
However, one of the most important roles played by the user manual is to help in solving problems with Hotpoint WMM65. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hotpoint WMM65 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
