Instruction/ maintenance manual of the product SDAL 1200 Hotpoint
Go to page of 16
Instruction booklet DISHWASHER Contents Installation, 2-5 Positioning and levelling Technical data Electrical connection Connecting the water supply Ecodesign Regulation Description of the appliance, .
2 EN * Only available in selected models. Installation Technical data Dimension s width 45 c m height 85 c m depth 60 c m Capacit y 10 standar d plac e-s etti ngs Water suppl y pressure 0,05 ÷ 1MPa (0.
3 EN The dishwasher meets the requirements set out by the regulations in force concerning safety and electrical equipment. Any technical checks should be conducted exclusively by a trained and authorised technician: Repairs carried out by unaithorised persons will invalidate the guarantee, as well as posing a potential hazard to the user.
4 EN Connecting the water supplies Connection to the water and electricity supplies should only be performed by a qualified technician. The dishwasher should not stand on top of the water hoses or the electricity supply cable.
5 EN Anti-flooding protection * To ensure floods do not occur, the dishwasher: - is provided with a special system which blocks the water supply in the event of anomalies or leaks from inside the appliance.
6 EN Overall view 1. Upper rack 2. Upper sprayer arm 3. Tip-up compartments 4. Rack height adjuster 5. Lower rack 6. Lower sprayer arm 7. Cutlery basket 8. Washing filter 9. Salt dispenser 10. Detergent and rinse aid dispensers 11. Data plate 12. Control panel *** *** Only in completely built-in models.
7 EN Loading the racks * Only available in selected models. ** The number and position may vary. Tilt A Tilt B Tilt C Before loading the racks, remove all food residues from the crockery and empty liquids from glasses and cups. Arrange the crockery so that it is held in place firmly and does not tip over.
8 EN Start-up and use Measuring out the detergent A good wash result also depends on the correct amount of detergent being used; exceeding the stated amount does not result in a more effective wash and increases environmental pollution. Only use detergent which has been specifically designed for dishwashers.
9 EN * Only available in selected models. Half load If there are not many dishes to be washed, a half load cycle may be used in order to save water, electricity and detergent. Select the wash cycle and press the HALF LOAD button: the indicator light will illuminate.
10 EN Wash cycles The number and type of wash cycles and options may vary depending on the dishwasher model. Notes: To make it easier to measure out the detergent, it is worth remembering that: 1 tablespoon = 15 gr. of powder = approximately 15 ml of liquid - 1 teaspoon = 5 gr.
11 EN G H F Rinse aid and refined salt Only use products which have been specifically designed for dishwashers. Do not use table salt or industrial salt, or washing up liquid.
12 EN Care and maintenance Shutting off the water and electricity supplies • Turn off the water tap after every wash cycle to avoid leaks. • Always unplug the appliance when cleaning it and when performing maintenance work.
13 EN Precautions and advice * Only available in selected models. The appliance was designed and manufactured in compliance with current international safety standards. The following information has been provided for safety reasons and should therefore be read carefully.
14 EN Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance (see Assistance). Troubleshooting * Only available in selected models.
15 EN After Sales Service After Sales Service No one is better placed to care for your Hotpoint appliance during the course of its working life than us - the manufacturer.
16 EN Guarantee 195106208.00 07/2012 - Xerox Fabriano Guarantee 12 months Parts and Labour Guarantee Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase.
An important point after buying a device Hotpoint SDAL 1200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hotpoint SDAL 1200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hotpoint SDAL 1200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hotpoint SDAL 1200 you will learn all the available features of the product, as well as information on its operation. The information that you get Hotpoint SDAL 1200 will certainly help you make a decision on the purchase.
If you already are a holder of Hotpoint SDAL 1200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hotpoint SDAL 1200.
However, one of the most important roles played by the user manual is to help in solving problems with Hotpoint SDAL 1200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hotpoint SDAL 1200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
