Instruction/ maintenance manual of the product OS Hotpoint
Go to page of 20
OS 897D P/HP OS 897D P IX/HP Contents Installation, 2-3 Positioning Electrical connection Technical data Description of the appliance, 4 Overall view Control panel Display Oven structure, 5 Start-up a.
2 GB Ventilation To ensure adequate ventilation is provided, the back panel of the cabinet must be removed. It is advisable to install the oven so that it rests on two strips of wood, or on a completely flat surface with an opening of at least 45 x 560 mm ( see diagrams ).
3 GB Electrical connection Ovens equipped with a three-pole power supply cable are designed to operate with alternating current at the voltage and frequency indicated on the data plate located on the appliance ( see below ). F ittin g t he p o w er s upp l y c a b l e 1.
4 GB Control panel RACK shelf DRIPPING P AN shelf GUIDE RAILS for the sliding racks position 5 position 4 position 3 position 7 position 6 Divider "D" position position 2 position 1 DIVIDER .
5 GB The Openspace oven has a capacity of 70 litres and offers users the option of cooking on 4 shelves at the same time or cooking large quantities, which would not necessarily be possible in a traditional oven.
6 GB The first time you use your appliance, heat the empty oven with its door closed at its maximum temperature for at least half an hour. Make sure that the room is well ventilated before switching the oven off and opening the oven door.
7 GB Automatic coo k ing functions The temperature and coo k ing duration are pre- set values, guaranteeing a perfect result every time - automatically. These values are set using the C.O.P.® ( Programmed Optimal Cooking ) system. The cooking cycle stops automatically and the oven indicates when the dish is cooked.
8 GB Place the food inside the oven while it is still cold. If you wish to place the food in the oven after it has been preheated, immediately following a high- temperature cooking programme, the text Hot will appear on the display until the temperature of the oven has fallen to 120°.
9 GB cooking modes which have not started will not be restored and must be reprogrammed. Coo k ing functions G R ILL function The top heating element is activated. By turning the TEMPERATURE knob, the different power levels which may be set will appear on the display; these range between 5% and 100%.
1 0 GB and that it is therefore possible to adjust the Main Space settings. 3. Both ovens will begin the preheating stage. The temperature may be changed by turning the TEMPERATURE knob. The indicator light flashes during the pre-heating stage. 4. Once the pre-heating stage is completed, the icon stops flashing (becomes fixed) and a buzzer sounds.
11 GB If the pizza has a lot of toppings, we recommend adding the mozzarella cheese on top of the pizza halfway through the cooking process. GRILL Preheat the oven for 5 minutes. Fit the DIVIDER to the DIVIDER rack D. Keep the oven door closed when cooking in this mode.
1 2 GB Cooking advice table for ovens wit h an ExtraLarge Space cavity Cook on no. o f shelves Rack po sition Func tio n Food s We igh t (in kg) No. Dr ippin g pa n Rack 1 R ack 2 Rack 3 Preheating Re.
1 3 GB Cook ing ad v ice table for the Sm all Spac e featur e Function Foo ds Weight (in kg ) Cook on no. of she lves Rac k positi on Preh eati ng Recom mended temperatur e (°C) Cooking durati o n (minutes) No.
1 4 GB P recautions an d tips This appliance has been designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully.
15 GB Care and m aintenance S w itchin g the appliance off Disconnect your appliance from the electricity supply before carrying out any work on it. Cleaning the appliance The stainless steel or enamel-coated external parts and the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and neutral soap.
1 6 GB A utomatic cleanin g with the FAST CLEAN function With the FAST CLEAN mode, the internal temperature of the oven reaches 500°C. The pyrolytic cycle is activated, burning away food and grime residues. Dirt is literally incinerated. Keep children away from the appliance during the automatic cleaning cycle as surfaces may become very hot.
17 GB.
18 GB.
Guarantee 12 months Parts and Labour Guarantee Y our appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase.
11/2009 - 195072446.01 XER O X FABRIAN O After Sales Service No one is better placed to care for your Hotpoint appliance during the course of its working life than us – the manufacturer .
An important point after buying a device Hotpoint OS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hotpoint OS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hotpoint OS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hotpoint OS you will learn all the available features of the product, as well as information on its operation. The information that you get Hotpoint OS will certainly help you make a decision on the purchase.
If you already are a holder of Hotpoint OS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hotpoint OS.
However, one of the most important roles played by the user manual is to help in solving problems with Hotpoint OS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hotpoint OS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
