Instruction/ maintenance manual of the product HDA969 Hotpoint
Go to page of 20
‘“wtogetYour the best from Dkhwmher Contents Air Gap 11 Soil Level 7 Appliance Registration 2 Pots & Pans 4,5 Care and Cleaning 11 Problem Solver 12-14 China, Crystal, Sterling 10 Rinse Agent .
Help us help you... Before using your dishwasher, read this book carefully. It is intended to help you operate and maintain your new dishwasher properly.
IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using this appliance. WARNING-When using this appliance, always exercise basic safety precautions, including the following: ● Use this appliance only for ik intended purpose, as you will find described in this Use and Care Book.
How to operate your dishwasher POTS* NORMAL ,, G,, WATER HEAT DR,,,G HEAT P,., WAS” WASH ,, 0,, ON OFF >’ STEP 1. Load your dishwasher with dishes, silverware, pots, pans, bowls, etc., according to instructions on pages 8 and 9. STEP 2. Add detergent to the detergent dispenser.
● For DRY~LATE WARMER cycle: a. Load clean plates and dishes to be warmed. b. Select DRYING HEAT ON. c. Leave the door unlatched. wash,nq ON . OFF ● d~lng o- . I’H;FD 5 ● DRYIPLATEWARMER d. Slowly turn Cycle Indicator Dial clockwise to DRY/PLATE WARMER position.
Good dishwashing starti with HOT water To get dishes clean and dry you need hot water. To help you get water of the proper temperature, your dishwasher has a WATER HEAT feature that automatically senses the temperature of the water in the wash cycle and heots it, if necessary, to the proper temperature.
You’ll find two detergent dispensers on the inside door of your dishwasher. There are two because some cycles use two washes. See “Detergent Usage Guide” below (Be sure the Cycle Indicator Dial is at OFF position before adding detergent. Otherwise, the detergent cup will not close and latch properly.
How to load your dishwasher How to load the TOP WCK The top rack is best for glasses, cups and saucers. Cups Y{)U will hu~le. and glasses fit best alon~ the sides: This is the place for Make sure dishes are properly loaded to insure that dishwasher-safe plastics, too.
How to load the BOTTOM WCK Load platters, pots, pans and bowls along the sides, in Heavily soiled pots, pans and casseroles MUST be corners or in the back. All large items, such as pitchers, loaded in the bottom rack, facing down. Prop broiler salad bowls and mixing bowl;, should be washed in the pans and racks along the edge.
What you can usually wash safely in your dishwasher. And what you can’t. Special Instructions Some darkening or spotting possible. Remove by scouring with soap-filled steel wool pads. Usually Safe YES Material Aluminum Exceptions (not safe) Some colored anodized aluminum can fade.
Care and Cleaning USER MAINTENANCE INSTRUCTIONS Clean the control panel with a lightly dampened cloth. Dry thoroughly. Do not use abrasives or sharp objects on the panel. They can damage it. Clean the outside with a good appliance polish wax. The outside cabinet finish is durable, but it can scratch.
- m Questions? ~n Use This Problem Solver - PROBLEM DISHWASHER WON’T RUN UNUSUAL NOISE DISHES DON’T DRY UNCLEAN DISHES AND FLATWARE BLACK OR GRAY MARKS ON DISHES DETERGENT LE~ IN DISPENSER CUPS DE.
PROBLEM SPOTS AND FILMING ON GLASSES AND FLATWARE CLOUDINESS ON GLASSWARE POSSIBLE CAUSE AND REMEDY Spotting can be caused by all these things: ● ● ● ● ● ● ● ● Extremely hard water. (See page 6.) Low inlet water temperature. (To test, see page 6.
The Problem Solver (continued) PROBLEM CHIPPING OF CHINA SMALL AMOUNT OF WATER STANDING IN THE BOTTOM OF THE TUB WATER WON’T PUMP OUT OF THE TUB SUDS IN THE TUB DISHWASHER LEAKS POSSIBLE CAUSE AND REMEDY Rough handling can cause chipping. Load with care.
How to change color panels If you are redecorating, you can Note: Other color panels are change your dishwasher’s front available for your dishwasher. panels to match or blend with your Check the color you want on the new colors. order form below and mail it to us.
---------------------------------------------------------------------------------------a TAPE HERE 1 1 I 1 1 1 1 1 I 1 1 1 I 1 1 1 I 1 I 1 1 1 1 1 1 1 I I 1 1 1 1 1 1 1 t 1 1 1 1 Nanle Address City, State Zip 1 ! I 1 PLACE STAMP HERE 1 1 1 1 1 1 8 Hotpoint c/o Dri-View Mfg.
Notes 17.
Notes 18.
We’ll Be There With the purchase of your new Hotpoint appliance, receive - the assurance that if you ever need information or assis- tance, we’ll be there.
YOUR HOTPOINT AUTOMATIC DISHWASHER WARRANTY Save proof of original purchase date such as your sales slip or canceiled check to establish warranty period.
An important point after buying a device Hotpoint HDA969 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hotpoint HDA969 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hotpoint HDA969 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hotpoint HDA969 you will learn all the available features of the product, as well as information on its operation. The information that you get Hotpoint HDA969 will certainly help you make a decision on the purchase.
If you already are a holder of Hotpoint HDA969, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hotpoint HDA969.
However, one of the most important roles played by the user manual is to help in solving problems with Hotpoint HDA969. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hotpoint HDA969 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
