Instruction/ maintenance manual of the product BWD 129 Hotpoint
Go to page of 20
Instructions f or Installation and Use W asher -dryer Model BWD 129.
.
1 GB English,1 Contents Installation, 2-3-4-5-6-7 Unpacking and levelling, 2 Electric and water connections, 2-3 The first wash cycle, 4 T echnical details, 5 Instructions f or the fitter , 6-7 W ashe.
GB Keep this instruction manual in a saf e place f or f uture ref erence. Should the appliance be sold, transf erred or moved, make sure the instruction manual accompanies the Washer -dr yer to inf orm the new owner as to its operation and f eatures.
3 GB Connecting the drain hose Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor; alternatively , place it over the edge of a basin, sink or tub, f astening the duct supplied to the tap (see figure) .
" GB If a 13 amp plug (BS 1363) is used it must be fitted with a 13 amp f use, either in the plug or adaptor or at the distribution board. If you are in any doubt the electrical supply to your machine, consult a qualified electrician bef ore use.
5 GB Service T roubleshooting Precautions Care Programmes Detergents Installation Description T ec hnic al det ails Mode l BWD 12 9 Dime ns io ns 59.5 cm wi de 81, 5 cm h igh 54 cm de ep Cap acit y f .
$ GB Instructions for the fitter Mounting the wooden panel onto the door and inserting the machine into cabinets: In the case where the machine must be shipped f or final installation after the wooden panel has been mounted, we suggest leaving it in its original packaging.
7 GB Using the Drilling T emplate. - T o trace the positions of the holes on the left-hand side of the panel, align the drilling template to the top left side of the panel using the lines traced on the extremities as a ref erence.
& GB Control panel W asher -dryer description Detergent dispenser ON/OFF Button ST A RT/ RESET Button M V ARIABLE TEMPERA TURE Knob PROGRAMME Knob Leds FUNCTION B uttons DRYING PROGRAMME Knob DOOR LOCKED Led Detergent dispenser: to add detergent and f abric softener (see page 12).
9 GB DOOR LOCKED led: If this LED is on, the appliance door is locked to prevent it from being opened accidentally; to avoid any damages, w ait f or the LED to flash bef ore you open the appliance door . The rapid flashing of the DOOR LOCKED Led together with the flashing of at least one other LED indicates there is an abnormality .
GB Star ting and Programmes Programme table Notes For the A nti-crease f unction, please see page 12 . The inf ormation contained in the table is purely indicative.
11 GB Personalisations Setting the temperature (V ariable T emperature ) T urn the V ARIABLE TEMPERA TURE knob to set the wash temperature (see Programme table on page 1 0 ) . The temperature can be lowered, or even set to a cold wash (C ol d ). Set the drying cycle (Drying Programme) T urn the DRYING PROGRAMME knob to set the desired dr ying type.
GB Detergent dispenser Good washing results also depend on the correct dose of detergent: adding too much detergent won't necessarily make f or a more efficient wash, and may in f act cause build up on the interior of your appliance and even pollute the environment.
13 GB Precautions and advice The W asher-dr yer was designed and built in compliance with the applicable international saf ety regulations. The f ollowing inf ormation is provided f or your saf ety and should consequently be read carefully .
" GB Care and maintenance Cutting off the water or electricity supply T urn off the water tap after ever y wash. This will limit the wear of your appliance's water system and also prevent leaks. Unplug your appliance when cleaning it and during all maintenance operations.
15 GB Y our W asher-dryer could f ail to work. Bef ore calling f or Assistance (see page 17) , make sure the problem can't easily be solved by consulting the f ollowing list. T roubleshooting Problem The W asher-dryer won't star t. The wash cycle won't start.
$ GB.
% /* Service T roubleshooting Precautions Care Programmes Detergents Installation Description Guarantee 12 Months Parts and Labour Guarantee Y our applianc e has the benefit of our manuf acturer s guarantee, which co vers the cost of break down repairs for twelve months f rom the date of purchase.
195.044 .614 .04 February 2006 After Sales Service No one is better placed to care f or your Hotpoint appliance during the course of its working lif e than us - the manuf acturer .
An important point after buying a device Hotpoint BWD 129 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hotpoint BWD 129 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hotpoint BWD 129 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hotpoint BWD 129 you will learn all the available features of the product, as well as information on its operation. The information that you get Hotpoint BWD 129 will certainly help you make a decision on the purchase.
If you already are a holder of Hotpoint BWD 129, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hotpoint BWD 129.
However, one of the most important roles played by the user manual is to help in solving problems with Hotpoint BWD 129. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hotpoint BWD 129 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
