Instruction/ maintenance manual of the product AQ9D 692 S Hotpoint
Go to page of 16
EN 1 English,1 Contents Installation, 2-3-4-5 Unpacking and levelling Connecting the electricity and water supplies T echnical data Description of the machine, 6-7 T ouch control panel Running a wash .
EN 2 ! This instruction manual should be kept in a safe place for future r eference. If the washing machine is sold, given away or moved, please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it.
EN 3 Connecting the drain hose Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor; The drain hose may be connected to an under -sink trap. Before connecting the drain hose from the machine ensure that any blanks or removable ends have been taken off the spigot.
EN 4 As the colours of the wires in the lead may not corr espond with the coloured markings identifyng the terminals in your plug, proceed as follows: Connect Green & Y ellow wire to terminal marked E or or coloured Gr een or Green & Y ellow .
EN 5 T e c h n i c a l d a t a Model AQ9D 692 S Dimensions width 59.5 cm height 85 cm depth 64,5 cm Capacity from 1 to 9 kg Electrical connections please refer to the technical data plate fixed to the machine W ater connections maximum pressur e 1 MPa (10 bar) minimum pressur e 0.
EN 6 Description of the machine CONTROL P ANEL PORTHOLE DOOR Always use the handle to open the porthole door (see figure). DETERGENT DISPENSER DRAWER The detergent dispenser drawer is located inside the machine and can be accessed by opening the door .
EN 7 W ASH CYCLE SELECTOR knob Button with ON/OFF indicator light T ouch control panel TEMPERA TURE button OPTION buttons DISPLA Y M1 M3 ECO indicator light ST ART/P AUSE button with indicator light D.
EN 8 Running a wash cycle W ARNING: before you use the washing machine for the first time, run a wash cycle with detergent and no laundry , using the 90° cottons cycle without pre-wash.
EN 9 W ash options Steam Hygiene This option enhances washing performance by generating steam during the wash cycle that eliminates any bacteria from fibr es while treating them at the same time. Place the laundry in the drum, choose a compatible programme and select option “ “.
EN 10 Shirts: use the special “Shirts” wash cycle to wash shirts in differ ent fabrics and colours to guarantee they receive the best possible car e. Jeans: use the special “Jeans” wash cycle for all denim garments; turn inside out before washing and use a liquid detergent.
EN 11 Pr ecautions and tips ! The machine was designed and constructed in accordance with international safety regulations. The following information is provided for safety r easons and must therefor e be read car efully . General safety • This appliance was designed for domestic use only .
EN 12 T o access the pre-chamber: 1. take off the cover panel on the fr ont of the machine by first pressing it in the centr e and then pushing downwards on both sides until you can remove it (see figures); 2. position a container so that it will collect the water which flows out (approximately 1.
EN 13 T r ouble shooting Y our washing machine could occasionally fail to work. Before contacting the T echnical Assistance Centre ( see “Assistance” ), make sure that the pr oblem cannot be not solved easily using the following list. Problem: The machine does not switch on.
EN 14 The machine is noisy . The machine wont spin properly . The machine leaks from the dispenser . The machine leaks (other than dispenser). The Phase in Progr ess indicator lights flash rapidly at the same time as the ON/OFF indicator light. The machine smells.
EN 15 Assistance Guarantee 12 Months Parts and L abour Guarantee Y our appliance has the benefit of our manuf acturer ’ s guarantee, which covers the cost of breakdown repairs f or twelve months f rom the date of purchase.
EN 16 195084907.01 05/2010 - Xerox Fabriano Aft er Sales Service No one is better placed t o care f or your Hotpoint appliance during the c ourse of its working lif e than us - the manuf acturer .
An important point after buying a device Hotpoint AQ9D 692 S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hotpoint AQ9D 692 S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hotpoint AQ9D 692 S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hotpoint AQ9D 692 S you will learn all the available features of the product, as well as information on its operation. The information that you get Hotpoint AQ9D 692 S will certainly help you make a decision on the purchase.
If you already are a holder of Hotpoint AQ9D 692 S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hotpoint AQ9D 692 S.
However, one of the most important roles played by the user manual is to help in solving problems with Hotpoint AQ9D 692 S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hotpoint AQ9D 692 S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
