Instruction/ maintenance manual of the product 228 Hotpoint
Go to page of 16
Instruction booklet DISHWASHER Contents Installation, 2-5 Positioning and levelling Technical data Electrical connection Connecting the water supply Ecodesign Regulation Description of the appliance, .
2 EN Advice regarding the first wash cycle After the appliance has been installed, immediately before running the first wash cycle, completely fill the salt dispenser with water and add only then approximately 1 kg of salt ( see chapter entitled Rinse aid and refined salt ).
3 EN The dishwasher meets the requirements set out by the regulations in force concerning safety and electrical equipment. Any technical checks should be conducted exclusively by a trained and authorised technician: Repairs carried out by unaithorised persons will invalidate the guarantee, as well as posing a potential hazard to the user.
4 EN Connecting the water supplies Connection to the water and electricity supplies should only be performed by a qualified technician. The dishwasher should not stand on top of the water hoses or the electricity supply cable.
5 EN Anti-flooding protection * To ensure floods do not occur, the dishwasher: - is provided with a special system which blocks the water supply in the event of anomalies or leaks from inside the appliance.
6 EN Overall view 1. Upper rack 2. Upper sprayer arm 3. Tip-up compartments 4. Rack height adjuster 5. Lower rack 6. Lower sprayer arm 7. Cutlery basket 8. Washing filter 9. Salt dispenser 10. Detergent and rinse aid dispensers 11. Data plate 12. Control panel *** *** Only in completely built-in models.
7 EN Loading the racks * Only available in selected models. The number and position may vary. Before loading the racks, remove all food residue from crockery and empty liquids from glasses and cups. After loading the appliance, make sure that the sprayer arms can rotate freely.
8 EN Start-up and use Starting the dishwasher 1. Turn the water tap on. 2. Open the door and press the ON/OFF button: you will hear a short beep and the display and option indicator lights switch on. 3. Measure out the detergent ( see below ). 4. Load the racks ( see Loading the racks ).
9 EN Wash cycles If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher, re- duce the amount of detergent used accordingly. The number and type of wash cycles and options may vary depending on the dishwasher model.
10 EN G H F Rinse aid and refined salt Only use products which have been specifically designed for dishwashers. Do not use table salt or industrial salt, or washing up liquid.
11 EN Care and maintenance Shutting off the water and electricity supplies • Turn off the water tap after every wash cycle to avoid leaks. • Always unplug the appliance when cleaning it and when performing maintenance work.
12 EN The appliance was designed and manufactured in compliance with current international safety standards. The following information has been provided for safety reasons and should therefore be read carefully.
13 EN Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance ( see Assistance ). Troubleshooting Problem: Possibl e causes / Soluti ons: The d.
14 EN After Sales Service After Sales Service No one is better placed to care for your Hotpoint appliance during the course of its working life than us - the manufacturer.
15 EN Guarantee 12 months Parts and Labour Guarantee Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase.
16 EN 195064984.03 06/2012 pb - Xerox Fabriano.
An important point after buying a device Hotpoint 228 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hotpoint 228 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hotpoint 228 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hotpoint 228 you will learn all the available features of the product, as well as information on its operation. The information that you get Hotpoint 228 will certainly help you make a decision on the purchase.
If you already are a holder of Hotpoint 228, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hotpoint 228.
However, one of the most important roles played by the user manual is to help in solving problems with Hotpoint 228. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hotpoint 228 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
