Instruction/ maintenance manual of the product DM-200B Hoshizaki
Go to page of 13
1 Hoshizaki “A Superior Degree of Reliability” www .hoshizaki.com Model DM-200B Ice and Water Dispenser Hoshizaki America, Inc. Number: 73142 Issued: 8-24-2006 S E RV I C E M A N U A L.
2 IMPOR T ANT Only qualified ser vice technicians should attempt to install, ser vice or maintain this product. No installation, ser vice or maintenance should be under taken until the technician has thoroughly read this Ser vice Manual.
3 Please re vie w this manual. It should be read carefully bef ore this product is ser viced or maintenance operations are perf or med. Only qualified ser vice technicians should ser vice and maintain this product. This manual should be made a vailab le to the technician prior to ser vice or maintenance.
4 I. Specifications A. DM-200B Note: We reserve the right to make changes in specifications and design without prior notice. A C SUPPLY VOLTAGE 115/60/1 A MPERAGE 1.4 A MINIMUM CIRCUIT AMPACITY 15 A MAXIMUM FUSE SIZE 15 A A PPROXIMATE ELECTRIC CONSUMPTION 110 W A PPROXIMATE STORAGE CAPACITY 200 lbs (91 Kg) A PPROXIMATE ICE DISPENSING SPEED 7.
5 II. General Information A. Construction 1. DM-200B Manual Fill Co v er F ront P anel Ice Dispense Switch W ater Dispense Switch Spout Apron P anel Drain Grill Solenoid Assembly Gear Motor Assembly S.
6 III. T echnical Inf ormation A. Wiring Diagram 1. DM-200B.
7 IV . Ser vice Diagnosis Prob lem P ossible Cause Remedy [1] No ice dispensed. a) P ower Supply 1. Off at breaker or cord unplugged. 1. T ur n on or plug in cord. 2. Loose connection. 2. Tighten. 3. Bad contacts. 3. Check f or continuity and replace.
8 Prob lem P ossible Cause Remedy 3. Bad contacts. 3. Check f or continuity and replace. b) W ater Supply 1. Off or disconnected. 1. T ur n on or connect. c) Dispense Switch 1. Bad contacts. 1. Check f or continuity and replace. 2. Loose connection. 2.
9 V . Remov al and Replacement of Components IMPOR T ANT Ensure all components, f asteners and thumbscrews are securely in place after the equipment is ser viced. A. Remov al and Replacement of Gear Motor 1) Unplug the unit from the electrical outlet.
10 B. Remov al and Replacement of Solenoid 1) Unplug the unit from the electrical outlet. 2) Remov e the panels. 3) Disconnect the connectors from the solenoid leads. 4) Remov e the solenoid, and install a new solenoid. 5) Connect the connectors to the solenoid leads.
11 VI. Cleaning and Maintenance Instructions IMPOR T ANT Ensure all components, f asteners and thumbscrews are securely in place after any maintenance or cleaning is done to the equipment. A. Cleaning W ARNING 1. Hoshizaki recommends cleaning this unit at least once a year .
12 Fig. 1 F ront P anel Agitator Bin Cov er Shutter Assembly Spout Apron P anel Thumbscrew Screw Snap Pin.
13 B. Maintenance – Exterior P anels T o pre vent corrosion, wipe the e xterior occasionally with a clean and soft cloth. Use a damp cloth containing a neutral cleaner to wipe off oil or dir t build up .
An important point after buying a device Hoshizaki DM-200B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hoshizaki DM-200B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hoshizaki DM-200B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hoshizaki DM-200B you will learn all the available features of the product, as well as information on its operation. The information that you get Hoshizaki DM-200B will certainly help you make a decision on the purchase.
If you already are a holder of Hoshizaki DM-200B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hoshizaki DM-200B.
However, one of the most important roles played by the user manual is to help in solving problems with Hoshizaki DM-200B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hoshizaki DM-200B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
