Instruction/ maintenance manual of the product DB-130H Hoshizaki
Go to page of 13
SER VICE MANU AL July 13, 2005 MODEL HOSHIZAKI ICE DISPENSING BIN DB-130H 73128 June 15, 2005 ISSUED: NO: REVISED:.
2 IMPOR T ANT Only qualified ser vice technicians should attempt to ser vice or maintain this dispensing bin. No ser vice or maintenance should be under taken until the technician has thoroughly read this Ser vice Manual.
3 Please re view this manual. It should be read carefully before the dispensing bin is ser viced or maintenance operations are perf or med . Only qualified ser vice technicians should ser vice and maintain the dispensing bin . This manual should be made av ailab le to the technician pr ior to ser vice or maintenance .
4 I. Specification W e reser ve the right to make changes in specifications and design without prior notice. AC SUPPLY VOLTAGE 115/60/1 AMPERAGE 1.4 A MINIMUM CIRCUIT AMPACIT Y 15 A MAXIMUM FUSE SIZE.
5 II. General Inf ormation A. Construction.
6 III. T ec hnical Information A. Wiring Diagram.
7 IV . Service Diagnosis Prob lem Possib le Cause Remedy [1] No ice dispensed. a) P ower Supply 1. "OFF" position. 1. Mov e to "ON" position. 2. Loose connection. 2. Tighten. 3. Bad contacts. 3. Check f or continuity and replace. 4.
8 Prob lem Possib le Cause Remedy h) Mechanism 1. Chain out of position or loose. 1. Place in position or tighten. 2. Corrosion. 2. Apply oil. 3. K ey of sproc ket is not in position. 3. Place in position. 4. Bad alignment of sprock et. 4. Readjust. 5.
9 V . Remo val and Replacement of Components A. Gear Motor and Chain 1) T ur n off the power supply . 2) Remov e the front panel and left side panel. 3) Loosen the f our bolts holding Gear Motor Brack et (B) and the adjusting bolt. 4) Remov e the chain.
10 C. Spout Switch 1) T ur n off the pow er supply . 2) Remov e the front panel. 3) Remov e the spout s witch assembly and Barrier (A). 4) Disconnect the connectors from the spout s witch leads. 5) Install a new spout s witch. 6) Assemble the remo ved par ts in the re v erse order of the above procedure .
11 VI. Cleaning and Maintenance Instructions IMPOR T ANT Ensure all components, f asteners and thumbscre ws are securely in place after any maintenance or cleaning is done to the equipment.
12 Chute Spout – F ront P anel.
13 6) Scrub the inside of the bin, the agitator , the spout of the bin, the spout of the front panel and chute using a nylon scouring pad, brushes and cleaning solution, such as 5 oz. Hoshizaki “Scale A wa y” or “Lime-A-W a y” (Economics Laboratories Inc.
An important point after buying a device Hoshizaki DB-130H (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hoshizaki DB-130H yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hoshizaki DB-130H - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hoshizaki DB-130H you will learn all the available features of the product, as well as information on its operation. The information that you get Hoshizaki DB-130H will certainly help you make a decision on the purchase.
If you already are a holder of Hoshizaki DB-130H, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hoshizaki DB-130H.
However, one of the most important roles played by the user manual is to help in solving problems with Hoshizaki DB-130H. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hoshizaki DB-130H along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
