Instruction/ maintenance manual of the product WindTunnelTM Hoover
Go to page of 13
Self-Propelled W indTunnel ™ by HOOVER Congratulations on your purchase! This WindTunnel ™ vacuum cleaner takes HOOVER ® T ype “Y” Allergen Filtration filter bags This product was designed fo.
Fill in and retain The model and serial number are located on the back of the handle as shown. For your personal records, please enter the COMPLETE model and serial number in the spaces provided and retain this information.
3 1. Assembling cleaner Carton contents Remove all parts from carton and identify each item shown. Make sure all parts are located before disposing of packing. A. Handle screws (in bag with owner’ s manual) B. Hose, cleaning tools and wands C. Handle D.
Place smaller diameter end of wand, into bottom of rack. Snap wand into clip at the top. Repeat with other wand. STEP II Attach hose 1-5 1-8 1-9 1-6 1-7 Align end of hose with projection (E) over slots (F) in dirt duct on back of handle. Slide hose into (F) and twist hose to lock it into place.
14. Brush roll control: slide control to “Carpet” for cleaning with brush r oll ON or to “Hard” for cleaning with brush roll OFF . 15.Carpet height control: slide knob to cor r ect setting for height of carpet being cleaned. 16.Headlight 17.‘Dirt FINDER’display* 18.
2 - 9 Brush roll control Note: When handle is in upright posi- tion, brush roll is automatically OFF. Move the brush roll control only when the handle is in the upright position. Slide control to “Carpet” to turn brush r oll ON for cleaning carpet or rugs.
7 indicator (some models only) When red is in the OFF window, brush r oll is STOPPED. When red is in the ON window brush roll is ROT A TING. Cleaning lightweight 2 - 1 0 2 - 1 1 2 - 1 2 2 - 1 3 flexible rugs St and on one end of rug and move cl eaner to ward other end or edg e.
3 - 1 8 2 - 1 9 Changing filter bag Disconnect cleaner from electrical outlet. H Where to buy Filter bags may be purchased from Authorized Hoover Dealers (Depot), Leading Retailers, from Hoover Factor y Service Centers, or through The Hoover Company on-line at www.
How to reattach filter door The filter door is designed with a “break-away“ feature which allows it to snap free if it is pushed open too far . T o reattach, align hinges (C) of cover with slots on sides of filter area. Press door back into place.
3 - 1 2 3 - 1 3 3 - 1 1 D C 3 - 9 3 - 1 0 Belt replacement The belts are located under the bottom plate of the cleaner and should be checked from time to time to be sur e they are in good condition. The flat (wide) belt is described below; the other is described under “Brush roll r eplacement”.
Installing brush roll Grasp brush roll and fit it into position by first sliding end, opposite the belt, into the rectangular slot (G) on side of clean - er . Push other side of brush roll (H) into place. Belt may fit loosely when proper - ly installed.
Possible Cause Possible Solution • Incorrect carpet height setting • Move carpet height control to a higher setting Problem: Cleaner won’t run P ro bl e m : Cleaner / tools won’t pick up Possi.
13 Full One Year W arranty (Domestic Use) Y our HOOVER® appliance is warranted in normal household use, in accordance with the Owner ’ s Manual against original defects in material and workmanship for a period of one full year from date of purchase.
An important point after buying a device Hoover WindTunnelTM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hoover WindTunnelTM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hoover WindTunnelTM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hoover WindTunnelTM you will learn all the available features of the product, as well as information on its operation. The information that you get Hoover WindTunnelTM will certainly help you make a decision on the purchase.
If you already are a holder of Hoover WindTunnelTM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hoover WindTunnelTM.
However, one of the most important roles played by the user manual is to help in solving problems with Hoover WindTunnelTM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hoover WindTunnelTM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
