Instruction/ maintenance manual of the product WindTunnel Upright Bag Vacuum Cleaner Hoover
Go to page of 14
W indTunnel ™ by HOOVER Congratulations on your purchase! This WindTunnel ™ vacuum cleaner takes HOOVER ® Type “Y” Allergen Filtration filter bags This product was designed for easy Assembly (See page 3) www.
Fill in and retain The model and serial number are located on the bottom of the cleaner as shown. For your personal records, please enter the COMPLETE model and serial number in the spaces provided and retain this information.
3 STEP 1 Attach rack and handle Carton contents Remove all parts from carton and identify each item shown. Make sure all parts are located before disposing of packing. A. Handle section B. Cleaner body C. Hose rac k D . Hose, cleaning tools and wands E.
Align end of hose with projections (A) over slots (B) in dirt duct. STEP II Attach hose 1-8 1-11 1-13 1-9 1-10 Place nuts in recessed areas on front of handle. Hold each nut in place while tightening each bolt securely with a Phillips screw driver. Reposition bag door by fitting tabs on bottom of door into opening.
2. How to use Cleaner description 15.Furniture guard: helps prevent cleaner from mark ing furniture. 16.Nozzle control knob: slide knob to cor rect setting for height of carpet being cleaned. 17.Headlight 18.Embedded Dirt FIND- ER TM sensitivity switch 19.
Carpet height adjustment The cleaning of carpet and rugs takes place at the nozzle (A). When it is necessary to raise and lower the nozzle for various carpet pile heights, slide the nozzle control knob (B) to the desired setting.
7 Cleaning lightweight flexible rugs Stand on one end of rug and move cleaner toward other end or edge. Before reaching edge, push down on handle. This will lift up the nozzle (front of cleaner) as shown and will prevent rug from clinging to cleaner. Continue to lift up nozzle so that when you have r eached the edge, it is completely off the r ug.
3 - 1 8 2 - 1 6 Attach wand and tools Attach tool or wand to the hose (C). Attach second wand or tool to wand (D) by pushing it firmly onto the wand. T wist wand or tool slightly to tighten or loosen the connection.
Cleaning final filter The final filter assists in the filtration process to return clean air to the room. T o remove this filter when it becomes dirty, open the door on the side of the cleaner . Lift out filter (B) and hand wash it in cold water with mild detergent.
Securing agitator Grasp agitator firmly and fit it into posi - tion by first sliding end opposite the belt into the rectangular slot (F) on side of cleaner . Pull other side of agitator (G) into place. T urn agitator making sure belt is not pinched between agitator and agitator shield.
How to replace Disconnect cleaner from electrical outlet. Remove bottom plate, belt and agitator following directions in “The belt” section beginning with Fig. 3-10. Discard old agitator . Continue following the directions in “The belt” section to reposition belt, new agi - tator and bottom plate.
12 7. Replace belt guard (B) making sur e not to pinch brush bristles in guard. Tur n agitator making sure it rotates freely. Replace and tighten screws. 8. To replace bottom plate (A), insert the four tabs on edge of bottom plate into slots on front of tool.
13 If further assistance is needed, contact The Hoover Company Consumer Response Center, North Canton, Ohio 44270, Phone: 1-330-499-9499. In Canada, contact Hoover Canada, Burlington, Ontario L7R 4A8, Phone: 1-800-263-6376. Always identify your cleaner by the complete model number when request - ing information or ordering parts.
14 Full One Year W arranty (Domestic Use) Y our HOOVER® appliance is warranted in normal household use, in accordance with the Owner ’ s Manual against original defects in material and workmanship for a period of one full year from date of purchase.
An important point after buying a device Hoover WindTunnel Upright Bag Vacuum Cleaner (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hoover WindTunnel Upright Bag Vacuum Cleaner yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hoover WindTunnel Upright Bag Vacuum Cleaner - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hoover WindTunnel Upright Bag Vacuum Cleaner you will learn all the available features of the product, as well as information on its operation. The information that you get Hoover WindTunnel Upright Bag Vacuum Cleaner will certainly help you make a decision on the purchase.
If you already are a holder of Hoover WindTunnel Upright Bag Vacuum Cleaner, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hoover WindTunnel Upright Bag Vacuum Cleaner.
However, one of the most important roles played by the user manual is to help in solving problems with Hoover WindTunnel Upright Bag Vacuum Cleaner. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hoover WindTunnel Upright Bag Vacuum Cleaner along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center