Instruction/ maintenance manual of the product Wet/Dry Vac Hoover
Go to page of 10
W et/Dry V ac with Por table Blower and Exclusive two tank system Owner’ s Manual Read these instructions befor e operating cleaner . ®.
2 Impor tant Safeguar ds! When using an electrical appliance, always follow basic precautions, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. W ar ning: T o reduce the risk of fire, electric shock, or injury: • Do not expose to rain; store indoors only .
3 Gr ounding Instructions This appliance must be grounded. If it should malfunction or breakdown, gr ounding provides a path of least resistance for electrical current to r educe the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor (C) and grounding plug (A).
4 A A A B B B B A Car ton contents Remove parts from tank and identify the following: A. Outer tank B. Inner tank C. Cleaner lid and portable blower D. Caster supports (4) E. Casters (4) F . Caster support screws (4) G. Reusable cartridge filter - assembled to cleaner lid H.
5 Attach cleaner lid Rotate lid latches (E) outward. With wet/dry selector (F) toward drain side of tank align ribs (G) on front of tank with slots (H) on either side of hose inlets; place lid on tank. Rotate latches inward to lock lid in place. Note: For convenience in attaching and removing the lid, finger holds are pr ovided.
6 Extension cor d instructions Use an outdoor , grounding type, SJT extension cord of 16 gauge (up to 35 feet) or 14 gauge (any length). The extension cord must employ a 3-prong gr ounding type plug and a 3-pole receptacle that accepts the machine plug.
7 Dr ywall dust For best results when picking up dry wall dust, slide wet/dry selector (A) to expose “WET/T ANK INLET” (B) and make sure no water or moistur e is in the tank (outer tank). Keep inner tank in position. Insert hose into “WET T ANK INLET” and attach desired tool to hose end.
8 After wet pick-up Unscr ew drain cap (A) fr om bottom of outer tank. Empty contents into a suitable drain. As the liquid level decreases, it may be necessary to tip cleaner to allow remaining liquid to drain out. Rinse inside of tank thoroughly with clean water particularly if spills or other substances other than water have been picked up.
9 Prob lem: Loss of air suction • Possib le Cause • Possible Solution • Obstruction in hose, wand or tool. • Clear obstruction. • Clogged car tridge or foam filter . • Clean filter as described in “Maintenance” section. • Hole/split in hose .
HOOVER and are r egister ed trademarks THE HOOVER COMP ANY , NORTH CANTON, OHIO 44720 3 - 98 S6760 Litho USA 56514-020 ® ® ® HOOVER et sont des marques déposées THE HOOVER COMP ANY , NORTH CANTON.
An important point after buying a device Hoover Wet/Dry Vac (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hoover Wet/Dry Vac yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hoover Wet/Dry Vac - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hoover Wet/Dry Vac you will learn all the available features of the product, as well as information on its operation. The information that you get Hoover Wet/Dry Vac will certainly help you make a decision on the purchase.
If you already are a holder of Hoover Wet/Dry Vac, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hoover Wet/Dry Vac.
However, one of the most important roles played by the user manual is to help in solving problems with Hoover Wet/Dry Vac. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hoover Wet/Dry Vac along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
