Instruction/ maintenance manual of the product Turbo POWER Upright Vacuum Cleaner Hoover
Go to page of 13
® This product was designed for easy assembly (see page 3) www .hoover .com ENGLISH ➜ pp.1-13 ESP AÑOL ➜ pág. 14-21 FRANÇAIS ➜ p. 23-30 Owner’ s Manual Thank you for your pur chase! T urbo.
2 Thank you for choosing a HOOVER pr oduct. Please enter the COMPLETE model and serial numbers in the spaces provided. The numbers are located on the back of your cleaner . Model_________________________________________ Serial number_________________________________________ Hint: Attach your sales receipt to this owner ’s manual.
3 1. Assembly If you need any assistance: V isit our website at www .hoover .com . Click on the “Service” button to find the service outlet near est you OR Call 1-800-944-9200 for an automated r eferral of service outlet locations (U.S. only) OR Call 1-330-499-9499 to speak with a r epresentative in our Consumer Response Center .
4 1-6 1-7 1. Handle 2. Custom Control™ power switch 3. Custom Control™ indicator 4. T ool cover 5. Dusting brush 6. Pre-filter 7. HEP A cartridge filter 8. Headlight 9. Furniture guard 10. Nozzle control knob: tur n knob to correct setting for height of carpet being cleaned.
5 Continued ➜ A 2-3 2-4 2-5 Carr ying cleaner Use the carrying handle to lift the cleaner . Do not lift cleaner using dirt cup handle (A). Handle positions The handle of your cleaner has three posit.
2-11 Stair cleaning Use the hose and powered hand tool or furniture nozzle for stair cleaning. CAUTION: T o prevent the cleaner from falling, always place it at the bottom of the stairs. With handle in upright position, clean from bottom to top. Select proper tool A.
7 How to attach tool cover The tool cover is designed with a “break- away” feature which allows it to snap fr ee if it is pushed open too far . T o r eattach, align hinges of cover with slots on sides of tool storage area. Push cover down to secure in place.
3-13 Disconnect cleaner from electrical outlet. Step on handle release pedal and place cleaner in the lowest position. T urn cleaner over . Using a Phillips screw- driver , remove the two scr ews (A) locat- ed nearest the wheels at the r ear of the base of the cleaner .
9 Install bulb - Pull old bulb straight out of socket. Push new bulb straight into socket until locked in place Excessive force is not required. Replace hood - Reposition hood, fit- ting tabs (A) on either side under the lens cover as shown. Replace screw and HOOVER® emblem.
10 3-29 3. Remove agitator including end plates (C) and discard. 4. Inspect belt to ensure that it is in good condition. If belt is cracked, gouged or broken, r eplace it (see follow- ing section). 5. Insert brush roll through belt and posi- tion belt over gear teeth (D) on brush roll.
11 3-30 3-32 3-31 E 6. With curved ends down, slide end plates (C) of brush roll into slots (E) on tool. 7. Replace belt guard (B) making sur e not to pinch brush bristles in guard. T ur n agitator , to make sure it r otates freely . Replace and tighten screws.
12 Lubrication The cleaner is equipped with bearings that contain sufficient lubrication for the life of the cleaner . The addition of lubri- cant could cause damage. Therefore, do not add lubricant to any bearings. • Pre-filter clogged • Clean pre-filter as described in “Filter assembly” section.
13 Ser vice T o obtain appr oved HOOVER service and genuine HOOVER parts, locate the nearest Hoover Sales and Service Center or Authorized Hoover W arranty Service Dealer (Depot) by: • checking the .
An important point after buying a device Hoover Turbo POWER Upright Vacuum Cleaner (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hoover Turbo POWER Upright Vacuum Cleaner yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hoover Turbo POWER Upright Vacuum Cleaner - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hoover Turbo POWER Upright Vacuum Cleaner you will learn all the available features of the product, as well as information on its operation. The information that you get Hoover Turbo POWER Upright Vacuum Cleaner will certainly help you make a decision on the purchase.
If you already are a holder of Hoover Turbo POWER Upright Vacuum Cleaner, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hoover Turbo POWER Upright Vacuum Cleaner.
However, one of the most important roles played by the user manual is to help in solving problems with Hoover Turbo POWER Upright Vacuum Cleaner. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hoover Turbo POWER Upright Vacuum Cleaner along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
