Instruction/ maintenance manual of the product Self-Propelled WindTunnel Cleaner Hoover
Go to page of 13
Self-Pr opelled WindT unnel ™ by HOOVER ® Congratulations on your pur chase! This WindT unnel ™ vacuum cleaner takes HOOVER ® Type “Y” Aller gen Filtration filter bags This pr oduct was desi.
Fill in and r etain For your records, enter the model number and serial numbers in the spaces pro- vided. These numbers are located on the data label on the back of the cleaner body .
3 1. Assembling cleaner Car ton contents Remove all parts from carton and identify each item shown. Make sure all parts are located before disposing of packing. A. Handle screws (in bag with owner’ s manual) B. Hose, cleaning tools and wands C. Handle D.
Place smaller diameter end of wand, into bottom of rack. Snap wand into clip at the top. Repeat with other wand. STEP II Attach hose 1-5 1-8 1-9 1-6 1-7 Align end of hose with projection (E) over slots (F) in dirt duct on back of handle. Slide hose into (F) and twist hose to lock it into place.
14. Carpet height control: slide knob to correct setting for height of carpet being cleaned. 15. Headlight 16. Check bag indicator 17. Bag door 18. Cord hooks: wrap cord around hooks for storage. The top hook can be rotated right or left for easy cord release.
Edge cleaning Special edge groomers ar e provided on both sides of the front of the cleaner to remove dirt in carpet near baseboards and furniture. Guide either side parallel to the edge of carpet or furniture.
7 2-11 How to attach tool cover The tool cover is designed with a “break-away” featur e which allows it to snap free if it is pushed open too far . T o reattach, align hinges of cover with slots on sides of tool storage area. Push cover down to secure in place.
3-1 3-2 3-3 A B C 8 Changing filter bag Disconnect cleaner from electrical outlet. Wher e to buy Filter bags may be purchased fr om Authorized Hoover Dealers (Depot), Leading Retailers, from Hoover Factory Service Centers, or through The Hoover Company on-line at www .
How to reattach filter door The filter door is designed with a “break-away“ featur e which allows it to snap free if it is pushed open too far . T o reattach, align hinges (C) of cover with slots on sides of filter area. Press door back into place.
Replacing brush roll Removing brush roll Slide Brush Roll Control (Fig. 2-9) to “Hard” (OFF) position. T urn cleaner over and remove bottom plate (Fig.
Installing brush roll Grasp brush roll and fit it into position by first sliding end, opposite the belt, into the rectangular slot (G) on side of clean- er . Push other side of brush roll (H) into place. Belt may fit loosely when proper- ly installed.
Possible Cause Possible Solution • Incorrect carpet height setting • Move carpet height control to a higher setting Problem: Cleaner won’t run Problem: Cleaner / tools won’t pick up Possible C.
13 Full One Y ear W arranty (Domestic Use) Y our HOOVER® appliance is warranted in normal household use, in accordance with the Owner’ s Manual against original defects in material and workmanship for a period of one full year from date of purchase.
An important point after buying a device Hoover Self-Propelled WindTunnel Cleaner (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hoover Self-Propelled WindTunnel Cleaner yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hoover Self-Propelled WindTunnel Cleaner - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hoover Self-Propelled WindTunnel Cleaner you will learn all the available features of the product, as well as information on its operation. The information that you get Hoover Self-Propelled WindTunnel Cleaner will certainly help you make a decision on the purchase.
If you already are a holder of Hoover Self-Propelled WindTunnel Cleaner, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hoover Self-Propelled WindTunnel Cleaner.
However, one of the most important roles played by the user manual is to help in solving problems with Hoover Self-Propelled WindTunnel Cleaner. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hoover Self-Propelled WindTunnel Cleaner along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
