Instruction/ maintenance manual of the product S1049 Hoover
Go to page of 15
.
+ * Fill in and retain! The HOOVER vacuum cleaner you have just purchased is designed for carpet and floor cleaning and has cleaning tools for above the floor cleaning. Yourcleanerisa model no. and hasaserialnumber For your personal records, please enter the model number and serial number in the spaces provided above and retain in a safe place.
1 Important Safeguards! 0 0 0 0 0 0 0 0 0 l e 0 0 Read all instructions. Warning: Electric shock could occur if used outdoors or on wet sur- faces. Close supervision is necessary when any appliance is used by or near children. Do not allow vacuum cleaner to be used as a toy or to run unattended at any time.
’ Unpacking Unpack the cleaner from the carton and identify the parts shown. Remove and dispose of the cardboard packing. A. Cleaner B. Tools and extension wands C. Hose OR D. Wheeled carrier and hose with tool holder - deluxe model only The cleaner assembled will look like the drawing below.
Operate cleaner only at voltage specified on data plate on bottom of cleaner. 1. Combination rug and floor nozzle 2. Wheeled carrier provides easy towing; pull cleaner using hose to guide the cleaner easily over carpet, area rugs and door sills. (Removable) In- cluded with deluxe model only.
How to assemble 1. Connect hose Insert hose connector into opening in bag door by fitting prongs on end of hose connector into cor- responding slots in opening. Turn hose connector in either direction until it locks into position. Turn in opposite direction to remove from cleaner.
Push front of cleaner down to snap into place. Deluxe model only 3. Attach wheeled carrier The removable wheeled carrier can be used for transporting your cleaner from room to room or for use as you are cleaning. To attach wheeled carrier, first, open louvered door at the back of the cleaner.
1 How to use CAUTION: POTENTIAL SHOCK HAZARD This vacuum cleaner is not intended to be used where water may be present. Carpet will retain moisture long after it has been wet. This vacuum cleaner should not be used on wet or moist carpet. Rug and floor nozzle Use the combination rug and floor nozzle to clean both carpet and hard sur- face floors.
On certain types of dense carpet, it may be advantageous to keep the brush in a position where it does not come in contact with the carpet. To lock brush into the noz- zle, adjust lever to “RUG” position then press the brush all the way in- to the nozzle with your finger.
Cleaning tools The cleaning tools allow you to do above the floor cleaning and to clean hard to reach areas. 1. Furniture nozzle for uphol- stered furniture, draperies, tapes- tries, mattresses, clothing, and automobile interiors.
To clean stairs Place cleaner on stair as shown. Clean stairs from bottom to top. D.eluxe model may be used on $rirs with wheeled carrier attach- . Blower feature To use as a blower, remove hose from bag door. (See “How to as- semble” section) Open louvered door, at back of cleaner, by pull- ing up from bottom.
Maintenance The following sections are concerned with proper maintenance of the cleaner. Familiarize yourself with these home maintenance tasks and keep this owner’s manual in a convenient place where you can refer to it when needed. Proper use and care of your cleaner will assure continued cleaning effectiveness.
Secondary filter The secondary filter protects the motor from dirt particles. It is located at the front of the bag com- partment. When bag is removed, check filter, which is not remov- able.
* ,I - Lubrication The motor is equipped with two bearings that contain sufficient lubrication for the life of the motor. The addition of lubricant could cause damage.
VCMA VACUUM CLEANER MANUFACTURERS ASSOCIATION (HOOVER -AN ASSOCIATION MEMf3ERI This information has been compiled by the Vacuum Cleaner Matjufacturers ASSOCI ation from Government and Private Sources concerned with product safety. These basic guIdelInes are for your protectton and convenience.
An important point after buying a device Hoover S1049 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hoover S1049 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hoover S1049 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hoover S1049 you will learn all the available features of the product, as well as information on its operation. The information that you get Hoover S1049 will certainly help you make a decision on the purchase.
If you already are a holder of Hoover S1049, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hoover S1049.
However, one of the most important roles played by the user manual is to help in solving problems with Hoover S1049. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hoover S1049 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
