Instruction/ maintenance manual of the product Power Nozzle Hoover
Go to page of 9
i,‘ fjl ‘-‘Hoover@ Canister Cleaner with Owner’s ~llugal Enqlish - l - Power Nozzle I Esf%iol ,’ $g.lO-15 Fratqais - p. 16-20 I index Assembling Cleaner ........................... .3-4 Cleaner Description ............................... .3 How To Use Canister cleaner .
q Unpack cleaner from carton and identify the parts shown. Remove and dispose packing. A. Canister Cleaner B. Power nozzle C. Paper bag (installed in cleaner) D. Extension wands, hose and cleaning tools (only one of the combinations shown is included) The assembled cleaner will look like the drawing above.
Questions or Concerns? The Hoover Company wants to quickly resolve any concerns about your cleaner or questions regarding its use. Look on the list provided with the product for your local Hoover Fact.
. 0 Push plug on power nozzle cord l completely into cord receptacle underneath hand grip. Always disconnect cleaner from elec- trical outlet before attaching or removing power nozzle plug. . El For cleaners with plastic wands, squeeze tabs on separate cord clip together while pressing cord into small slot (E).
Check bag indicator (Available some models) q There are three conditions that will cause the indicator to become completely red: 1. The bag is full; change bag. 2. Very fine materials (such as powder) have been picked up, clogging the bag pores; change bag, even if it is not full.
q After using models without cord reel, wrap the cord around the ON- OFF pedal (A), cord hook (8) and lip (D) on rear of cleaner. To save space, the cleaner may be stored on its end. Familiarize yourself with these home maintenance task as proper use and care of your cleaner will ensure contin- ued cleaning effectiveness.
Re-attaching bag lid q : The bag lid and hinges are designed with a “break-away” fea- ture. If the lid is pushed open too far, it will come off. It can be easily re- attached by aligning the hinges with the appropriate slots in the cleaner, as shown.
q Return nozzle to original position: lift off nozzle cover. If belt is not broken, pull it off the motor pulley (A). Lift up end of agitator. Remove old belt from agitator and replace with new belt (B). Lettering on belt must be visible. q Stretch belt back and attach to l motor pulley (A).
‘” Lubrication The motor is equipped with bearings, which have been lubricated for the life of the motor. The addition of lubricant could cause damage.
An important point after buying a device Hoover Power Nozzle (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hoover Power Nozzle yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hoover Power Nozzle - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hoover Power Nozzle you will learn all the available features of the product, as well as information on its operation. The information that you get Hoover Power Nozzle will certainly help you make a decision on the purchase.
If you already are a holder of Hoover Power Nozzle, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hoover Power Nozzle.
However, one of the most important roles played by the user manual is to help in solving problems with Hoover Power Nozzle. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hoover Power Nozzle along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
