Instruction/ maintenance manual of the product Limited Hoover
Go to page of 15
V acuum Cleaner ® Read this manual before operating cleaner (Including Limited & Supreme models) ® Dimension Owner’ s Manual.
1 It is suggested that you attach your sales receipt to this owner’s manual. Verification of date of purchase may be required for warranty service of your HOOVER product.
4 STEP 2: Assemble handle 3 Assembling cleaner It is extre mely impor tant to read and follow all the i n struction steps in orde r . STEP 1 : Unpack ca rton Remove all parts from carton and identify each item shown. Make sure all parts, especially small items such as D, G, and K, are located before dispos- ing of cardboard packing.
Rotate c ord p rotector on cord until you see its arrow. (Fig. 4) 5 4 Do not plug cleaner in until assembly is totally complete. 8 9 RAILS RAILS 6 STEP 4: Att a ch handle Note location o f t apered rails on bra c ke t and on lower handle.
8 TABS 18 To replace bag door, in se rt the 2 tabs on botto m of bag door into the 2 slots on b ag compart- ment. (Fig . 1 8) 15 HOOKS DIRT TUBE SLOTS BAG COMPART- MENT Push paper bag collar f irm ly onto tube. (Fig. 17) 17 16 BAG COLLAR DIRT TUBE Tuck top and bottom of paper bag into bag compartment.
9 Pull switch lo c k above ON/OFF switch straight out. (Fig. 19) Dispose of switch lock. Note: If switch lock has come off during assembly make sure switch is in the OFF position (down) before plug- ging cord into electrical outlet.
12 How to use The cleaner can also be moved by lifting it as shown. under low furniture. Step on handle release lever to lower handle. T ransporting cleaner To move your cleaner from room to room, put handle in upright position, tilt cleaner back on rear wheels, and push forward.
The cleaning of carpet and rugs Carpet height adjustment The nozzle will not move into the adjusted position until the cleaner handle is lowered to the operating position. When using hose and tools, slide knob to the Cleaning Tools setting. Return knob to the correct setting when cleaning floors.
C. Att a ch wand and tools The tools are attached to the hose or the wand in the same manner. Push tool firmly onto hose; twist tool slightly to tighten or loosen connec- tion.
17 Maintenance The following sections are concerned with proper maintenance of the cleaner. Familiarize yourself with these home maintenance tasks and keep this owner’s manual in a convenient place where you can refer to it when needed. Proper use and care of your cleaner will ensure continued cleaning effectiveness.
20 5. Remove bulb by pulling straight out of socket; push new bulb into socket until it locks in place. 6. Place hood on cleaner body and press firmly to snap all four latches. Pull up on hood slightly to make sure all four latches are secured. Push nozzle control knob back onto front of cleaner.
21 How to replace Disconnect cleaner from electri- cal outlet and detach hose from cleaner. 1. Place handle in operating position and turn cleaner over. To remove bottom plate, insert end of flat screwdriver into wide area of right-hand slot and push handle of screwdriver to the rear.
If an obstruction occurs during tool use, turn cleaner off and disconnect from electrical outlet and disconnect hose from cleaner. Open hose door and carefully remove any visible obstruction. If no obstruction is found, check hose and tools. Remove obstruction.
25 Problem Possible cause Possible solution Cleaner l. Not firmly plugged in. l.Plug unit in firmly. won’t 2. No voltage in wall plug. 2.Check fuse or breaker. run 3. Blown fuse/tripped 3.Replace fuse/reset breaker. breaker. Cleaner l. Broken or worn belt.
Full One Y ear W arranty (Domestic Use) Your HOOVER ® appliance is warranted in normal household use, in accordance with the Owner’s Manual against original defects in material and workmanship for a period of one full year from date of purchase.
An important point after buying a device Hoover Limited (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hoover Limited yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hoover Limited - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hoover Limited you will learn all the available features of the product, as well as information on its operation. The information that you get Hoover Limited will certainly help you make a decision on the purchase.
If you already are a holder of Hoover Limited, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hoover Limited.
However, one of the most important roles played by the user manual is to help in solving problems with Hoover Limited. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hoover Limited along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
