Instruction/ maintenance manual of the product Hand-held Vacuum Cleaner Hoover
Go to page of 15
c j Twist & Vat’” with swivel nozzle Cleaner Review this manual before operating cleaner.
-- - - . - -v-v This cleaner was inspected and packaged carefully before being shipped from the factroy. If you should happen to need assistance during assembly or operation call l-800-944-9200 for an automated referral of authorized service outlet locations (U.
I Important Safeguards! When using an electrical appliance, always follow basic precautions, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE n To reduce the risk of fire, electric shock Warning. or injury: Do not use outdoors or on wet surfaces.
0 Unpacking Unpack the cleaner from the carton and identify the parts shown. Remove and dispose of cardboard packing. 1. Bottom plate 2. Multi-purpose nozzle 3. Front cover 4.On/Off switch 5. Handle 6. Dirt Cup 7. Dirt cup latch button 8. Nozzle latch This cleaner is intended for household use.
Questions or Concerns? The Hoover Company wants to quickly resolve any concerns about your cleaner or questions regarding its use. Look on the list provided with the product for youre local Hoover Fac.
How to rotate nozzle CAUTION: MOVING PARTS. TURN CLEANER OFF BEFORE ROTATING NOZZLE. To rotate nozzle either vertically or horizontally, place thumb on latch with finger on front of nozzle.
2. Grasp dirt cup section; depress dirt cup latch. 4. With dirt cup section in hand, grasp extension on filter frame and lift out. 6. Pull middle section of filter out of filter frame. I 3. Slide dirt cup off handle section. 5. Empty dirt cup. 7. Brush surface of filter to remove any clinging litter.
I I I 8. Replace filter, matching 9. Slide dirt cup completely onto rounded flap with rounded side of handle making sure latch is secure. dirt cup (opposite side that slides onto handle).
The belt The belt in your cleaner drives the agitator. It has been designed specifi- cally for use in this cleaner and is important for effective operation. Where to buy The belt may be purchased from your local Authorized Hoover Dealer or from a Hoover Factory Service Center.
3. Pivot off bottom plate making sure to unhook center tab on inside edge of nozzle (opposite edge with screws). 4. If belt is stretched, remove it from the motor pulley. Remove agitator and belt from nozzle. 5. Put new belt on agitator. Position agitator in nozzle orient- ing agitator end caps with slots on both sides of nozzle.
6. Attach belt to motor pulley. Replace bottom plate by first hooking it to center tab on inside of nozzle. 7. Reposition screws and front cover. 8. Make sure “bridge” across bottom plate opening covers belt. If belt is not covered, agitator is not correctly oriented in nozzle.
How to replace Disconnect cleaner from electri- cal outlet. 1. Remove bottom plate, agitator and belt following directions for “How to replace belt.” 2. Discard old agitator and end caps. 3. If the end caps should fall off the agitator, they are different from each other and need to be properly oriented as shown below.
If you have a problem This appliance was inspected thoroughly and was in good operating condition when it was shipped from the factory. If a minor problem develops, it usually can be solved quite easily when the cause is identi- fied. Therefore, this check list is provided for your convenience.
Service To obtain approved HOOVER service and genuine HOOVER parts, locate the nearest Hoover Factory Service Center or Authorized Hoover Warranty Service dealer (depot) by: l checking the Yellow Pages under “Vacuum Cleaners - Household” OR- * Checking the list of Factory Service Centers provided with this cleaner OR- .
HOOVER and @ are registered trademarks of 0 P THE HOOVER COMPANY, NORTH CANTON, OHIO 44720 RI 3-96 S1147 Printed in China 59139-180.
An important point after buying a device Hoover Hand-held Vacuum Cleaner (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hoover Hand-held Vacuum Cleaner yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hoover Hand-held Vacuum Cleaner - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hoover Hand-held Vacuum Cleaner you will learn all the available features of the product, as well as information on its operation. The information that you get Hoover Hand-held Vacuum Cleaner will certainly help you make a decision on the purchase.
If you already are a holder of Hoover Hand-held Vacuum Cleaner, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hoover Hand-held Vacuum Cleaner.
However, one of the most important roles played by the user manual is to help in solving problems with Hoover Hand-held Vacuum Cleaner. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hoover Hand-held Vacuum Cleaner along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
