Instruction/ maintenance manual of the product Floor Mate with Spin Scrub Brushes The Hard Floor Cleaner Hoover
Go to page of 14
Review this manual before operating cleaner . This cleaner inspected and packaged carefully before being shipped from the factory. If you should happen to need assistance during assembly or operation: Visit us online at www.
2 Fill in and retain The model and serial number are located at the bottom of the back of the cleaner body. For your personal records, please enter the COMPLETE model and serial number in the spaces provided and retain this information.
3 1. Assembly 1-1 1-2 Questions or Concerns? The Hoover Company wants to quickly resolve any concerns about your cleaner or questions regarding its use.
G 1-3 1-6 1-4 1-5 With cord hook (B) to back of cleaner, push upper handle down onto cleaner. Insert screw with washer in front of tank area. Tighten screw with a Phillips screwdriver. Replace clean solution tank by posi- tioning bottom first. Press latch and snap top portion into place.
6 2-1 The assembled cleaner will look like this drawing. 1. Hand grip 2. Solution trigger: squeeze to release clean solution. 3. Brush control switch: Turns brushes ON for wet cleaning and OFF for wet pickup and dry vacu- uming. 4. Clean solution tank release 5.
2-9 Carry tank to a sink. Rotate tank cap counter-clockwise and lift up to remove cap. 2-8 The Tanks Clean Solution Tank (Upper Tank) The clean solution tank holds the cleaning solution that is to be dis- persed onto the surface to be cleaned. How to fill Disconnect cleaner from electrical outlet.
FILL I 7 2-12 2.0 oz./60ml. 2-13 2.0 oz./60ml. 2.0 oz./60ml. Turn cap (H) upside down to serve as a measuring cup. 2-10 Using cap, measure 2 oz. of applica- ble concentrate formulated for use with the ‘FloorMate’ hard floor cleaner. 2-11 Pour cleaning concentrate into tank.
2-21 2-22 Turn cleaner OFF and disconnect from electrical outlet. Remove recovery tank and lid (Fig. 2- 16 & 2-17). Remove filter lid (S), then remove filter. Remove loose debris from filter by either brushing or tap- ping the filter. The filter may also be rinsed for additional cleaning.
OPERATION BRUSH CONTROL SWITCH WET/DRY PEDAL Dry Vacuuming “Wet/Dry Pickup” (UP) Dry Pickup Wet Cleaning “Wet Scrub” (DOWN) Wet Pickup/ Scrub Wet Pickup “Wet/Dry Pickup” (UP) Wet Pickup/ Scrub See Page 6 Figs. 2-6 and 2-7 for complete instructions on the control switch and pedal.
4-1 4-2 Cleaning the brushes Turn cleaner OFF and disconnect from electrical outlet. The brush assembly can be removed for easy cleaning. Push the two brush release buttons (A) at the same time. Tilt cleaner back slightly and remove brush assembly (B).
4-3 4-4 DRY PICKUP PUSH T O SELECT DRY OR WET HANDLE RELEASE WET PICKUP SCRUB 4-5 4-6 4-7 4-8 To replace brushes, first remove solu- tion tank (Fig. 2-8) and recovery tank (Fig. 2-16). Set tanks aside. This will prevent possible leaking. With handle in upright position, tilt cleaner back so that it rests on the floor.
Service T o obtain approved HOOVER service and genuine HOOVER parts, locate the near- est Hoover Factory Service Center or Authorized Hoover Warranty Service Dealer (Depot) by: • checking the Yellow.
Full One Year Warranty (Domestic Use) Your HOOVER® appliance is warranted in normal household use, in accordance with the Owner’s Manual against original defects in material and workmanship for a period of one full year from date of pur- chase.
14.
An important point after buying a device Hoover Floor Mate with Spin Scrub Brushes The Hard Floor Cleaner (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hoover Floor Mate with Spin Scrub Brushes The Hard Floor Cleaner yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hoover Floor Mate with Spin Scrub Brushes The Hard Floor Cleaner - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hoover Floor Mate with Spin Scrub Brushes The Hard Floor Cleaner you will learn all the available features of the product, as well as information on its operation. The information that you get Hoover Floor Mate with Spin Scrub Brushes The Hard Floor Cleaner will certainly help you make a decision on the purchase.
If you already are a holder of Hoover Floor Mate with Spin Scrub Brushes The Hard Floor Cleaner, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hoover Floor Mate with Spin Scrub Brushes The Hard Floor Cleaner.
However, one of the most important roles played by the user manual is to help in solving problems with Hoover Floor Mate with Spin Scrub Brushes The Hard Floor Cleaner. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hoover Floor Mate with Spin Scrub Brushes The Hard Floor Cleaner along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
