Instruction/ maintenance manual of the product 53425 Hoover
Go to page of 13
. /I d HOOVER@ Deluxe Uprtght Cleaner Read this manual before operating the cleaner Owner’s Manual ENGLISH + pp.l-14 ESPAflOL + p&g 15-22 FRANGAlS -8 p. 23-29 This cleaner was inspected and packaged carefully before being shipped from the factory.
Fill in and retain The model’and serial number are located on the bottom of the cleaner. For your personal records, please enter the COMPLETE model and serial number In the spaces provided and.retain this information. Your cleaner is model and has serial number It is suggested that you attach your sales receipt to this owner’s manual.
it is extremely important to read and follow all the instruction steps in order. The assembled cleaner will look like this drawing. If you need assistance with any step of the assembly, call I-800-944-9200 for an automated referral of authorized service outlet locations (U.
’ Stats& Assemble Note: The white switch lock above the ON/Off switch, aids in assembly of your cleaner. Assembly can be continued if the switch lock is missing. However, do not remove the switch lock until assembly is completed. Align upper handfe and lower handle as shown.
I I I Pull bracket toward bottom of handle slightly to make sure bracket is locked in place. Make sure hole in bracket aligns with hole in handle. With ON/OFF switch to the front, place assembled handle down onto extension on cleaner base. Rock handle side to side while pushing down firmly.
. Sqep 5 AHach paper bag Align opening in paper bag with dirt tube (S) inside bag compartment. Push paper bag firmly onto tube. Tuck top and bottom of paper bag into bag compartment. To replace bag door, insert the 2 tabs on bottom of bag door into the 2 slots on bag compartment.
cleaner description 16 ld Operate cleaner only at voltage specified on data plate on bottom of cleaner. This cleaner is intended for household use. The assembled cleaner will look like the drawing. 1. Handte 2. ONIDFF switch 3. Cord hooks: wrap cord around hooks for storage.
$sr&et height adjust- For ease in sliding the control, the han- dle should be in the upright position. When it is necessary to raise and lower the front of the- cleaner (A) for various carpet pile heights, slide the carpet height control (3) to the correct setting.
B. Select proper clean- C. Attach wand and ing tool tools A. Dusting brush may be used for carved furniture, table tops, books, lamps, lighting fixtures, Venetian blinds, baseboards, shutters, and registers.
Changing ,filter ,bag Disconnect cleaner from electrical outlet. Removing-bag door Pull bag door latch forward and remove door from cleaner. Grasp bag collar and pull collar from tube. Note: Do not clean out old bag and reuse. Discard used bag. Mxwing and installing filter Align opening in new filter bag with dirt tube (B) inside bag compartment.
Belt. replacement, The -belt on your .HOOVER cleaner causes the agitator to rotate- and is important-for the effective operation of the cleaner.- The belt is located under the bottom-plate of the cleaner and should be checked from time to time to be sure it is in good condition.
b Edge groomer Lubrication - I- replacement When to replace The edge groomers, located on both sides of the front of the cleaner, should be replaced when they no longer extend past the surface of the bottom plate. What to buy When purchasing edge groomers, ask for HOOVER part No.
Clearing blockages Remove large items from surfaces before vacuuming to prevent blockages and to maintain cleaning effectiveness of your cleaner. Refer to the following steps to check for- blockages continuing with each step until the blockage is found.
An important point after buying a device Hoover 53425 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hoover 53425 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hoover 53425 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hoover 53425 you will learn all the available features of the product, as well as information on its operation. The information that you get Hoover 53425 will certainly help you make a decision on the purchase.
If you already are a holder of Hoover 53425, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hoover 53425.
However, one of the most important roles played by the user manual is to help in solving problems with Hoover 53425. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hoover 53425 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
