Instruction/ maintenance manual of the product 1170 Hoover
Go to page of 12
Instructions for your DIAL-A-MATIC CLEANER WITH AUTOMATIC POWER DRIVE Model 1170.
2 ON/OFF SWITCH BAG INDICATOR SUCTION DIAL F$sq ,f&&$$ NOZZLE HOSE I WRAP-AROUND FURNITURE GUARD Your Power Drive Cleaner has been completely assembled at our factory. It is ready for use with- out further assembly or adjustment. THREE POSITION HANDLE Storage, operating and low (for reaching under low furniture).
For greater convenience and ease of operation, this Deluxe cleaner provides you with an ex- clusive Automatic Power Drive feature. The Automatic Power Drive Control is built into the handle of the cleaner. This automatic drive propels the cleaner forward and backward at a variable rate of speed controlled entirely by (you) the operator.
THIS IS THE “HEART” OF YOUR NEW HOOVER POWER DRIVE CLEANER Your new Hoover Power Drive is the most powerful upright cleaner ever built. To handle the wide range of pile depth of modern carpets and rugs, two (2) adjustment features have been provided.
E CLEANING TOOLS (See Page 4 for setting Suction Control Dial when using tools). 1. TUFFLEX HOSE Double vinyl reinforced with nylon mesh for long, trouble-free life. The light flexible hose has a vinyl tab, so it can be hung on the cleaner or on a hook in a closet.
6 HELPFUL HINTS Don’t Pick Up Tacks Your cleaner is powerful. It can pick up tacks, pins, paper clips, etc. How- ever, hard sharp objects should not be picked up by the cleaner. They may clog or damage the hose and the throw-away bag. Take Care of The Cord Wind it loosely, on the cover latch and knob on Suction Control Dial, to avoid strain.
ose on the cleaner carries the dirt from the nozzle to the throw-away bag. lf the hose becomes obstructed (which may happen if the bag is overfilled), remove it and clear it. Pull the hose end from the bottom of the bag housing and unscrew hose end by turning in a clockwise direction.
THE BELTS There are two belts on your Hoover cleaner. The belts control the speed of the agitator and the power drive pulley and are important for the efficient operation of your cleaner. Because of this, when buying new belts, you should always insist on genuine Hoover belts.
THE BRUSHES When brushes a&worn and bristles do not touch the edge of a card held across the nozzle, they should be replaced. Always replace both brushes at the same time to maintain cleaning efficiency. To Replace Brushes. Remove bottom plate, belt and agitator following directions given on Page 8.
ELECTRIC KNIVES HANDMIXER AUTOMATIC ELECTRIC CANOPENER- TOASTERS FRY PANS KNIFE SHARPENER STAINLESS STEEL BLENDERS PROFESSIONAL-TYPE COFFEEPOT UAlD nDVCD.
DIAL-A-MATIC PORTABLE CLEANERS CLEANERS FLOOR-A-MATIC RUG HANDIVAC SHAMPOO- &FLOORCONDlTlONER CLEANER POLISHERS SPIN-DRYING WASHERS AUTOMATlCWASHERShDRYERS .
SERVICE Service and genuine Hoover replacement parts may be obtained from Hoover Factory Service Stations listed on white insert. For Service in Warranty Period follow instrudtions set forth in Guarantee. When ordering new parts make sure that you always mention the model number of the product.
An important point after buying a device Hoover 1170 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hoover 1170 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hoover 1170 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hoover 1170 you will learn all the available features of the product, as well as information on its operation. The information that you get Hoover 1170 will certainly help you make a decision on the purchase.
If you already are a holder of Hoover 1170, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hoover 1170.
However, one of the most important roles played by the user manual is to help in solving problems with Hoover 1170. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hoover 1170 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
