Instruction/ maintenance manual of the product 1100 Hoover
Go to page of 16
Instructions for YOUR NEW HOOVER DIAL-A-MATIC CLEANER Model 1100.
HANDLE GRIP OPENING FOR HANGING CLEANER IN STORAGE AREA ON/OFF SWITCH / COVER LATCH NOZZL HOSE MODEL 1100 G HANDLE.
TO ATTACH HANDLE TO CLEANER I. Remove tape and screw from handle socket and set aside for later use. 2. Connect electric plug from bottom of handle to electric plug projecting from handle socket. Make sure plug assembly is positioned as shown in illustration.
, THIS IS THE ttHEART” OF Y THE DIAL-A-MAT/C GIVES THE BEST AND MOST E/=F/C/E) SET THE DIAL FOR CARPET AND RUG CLEANING Your new HOOVER DIAL-A MATIC is the most powerful up- right cleaner ever built. Proper suction control for your floor coverings is most important for cleaning effectiveness and ease of operation.
l V HOOVER DIAL-A-MATIC CLEANER SE OF A VACUUM CbEANER THAT YAS EVER BEEN DEVISED. SET THE DIAL FOR CLEANING TOOLS The handle of the cleaner should be in storage position (See page 2) when cleaning tools are used. When the handle is in this position, the nozzle is raised and the agitator does not come in contact with the rug.
THE CLEANING TOOLS MODEL 1101 (See Page 5 for setting Suction Control Dial when using tools.) The cleaning tools have many uses. Some are listed below: 1. TUFFLEX HOSE Double vinyl reinforced with nylon mesh for long, trouble-free life. The light flexible hose has a vinyl tab, so it can be hung on the cleaner or on a hook in a closet.
TO STORE TOOLS While moving furniture, hose can be conveniently hung on handle. The vinyl tool kit has been,designed so the tools can be packed inside and the hose attached, by strap, on outside. The kit has two slots located near the top for ease in hanging on the cover latch of the cleaner or on a hook in the closet.
HELPFUL HINTS EASY TO CARRY Use the comfort- able handle grip for carrying your Hoover cleaner, or move it from room to room by tipping it back on wheels and pushing it. DON’T PICK UP TACKS Hard, sharp objects should not be picked up by the cleaner.
Check Nozzle Hose (cont.) throw-away bag being full of fluff from a new carpet, put a new throw-away bag on the cleaner. Then place handle in storage position, turn cleaner on, and move lever on Suction Control Dial back and forth. This will clear the hose.
TO REPLACE THROW- AWAY BAG Tip cleaner over, resting handle on the floor. @pen bag cover of cleaner by turning latch in either direction. Lift bag cover.
1. 2. 3. 4. 5. 6. 6 HOW TO REPLACE THE BELT Turn cleaner over. Remove metal plate on bottom of cleaner by pushing latches toward the out- side of cleaner. Lift plate to re- lease it from wire holders. Push latches, that hold agitator, in and toward center of cleaner until they are free.
WHAT YOU SHOULD KNOW ABOUT THE BELT The belt of your Hoover cleaner controls the speed of the agitator and is important for the efficient operation of your cleaner. Be- cause of this, when buying a new belt, you should always insist on a genuine Hoover belt.
2. After plate is removed, pry out the end section as shown in illustration. 3. After plate is removed, tap the shaft gently with a hammer. 4. Pull other plate and the shaft from agitator. 5. Remove brushes by pull- ing them from agitator. If they do not come out easily, pull them out with pliers.
SERVICING YOUR HOOVER APPLIANCE Service and genuine Hoover replacement parts may be obtained from Hoover Factory Branch Service Stations or consult the Yellow Pages of your Telephone Directory under Vacuum Cleaners-Hoover. For Service in Warranty Period follow instructions set forth in Guarantee.
WORLD FAMOUS HOOVER APPLIANCES DIAL-A-MATIC PORTABLE CLEANER FLOOR WASHER LARK CLEANER SHAMPOO-POLISHER ILISHER-SCRUBBER PIXIE CLEANER DUSTETTE STEAM-DRY IRON SHAMPOO WAX WASHER-SPIN DRYER CAN OPENER .
GXJARANTEE Your Hoover appliance is guaranteed against original defects in material and workmanship for a Period of one year from the date of purchase under normal use at the voltage marked thereon.
An important point after buying a device Hoover 1100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hoover 1100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hoover 1100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hoover 1100 you will learn all the available features of the product, as well as information on its operation. The information that you get Hoover 1100 will certainly help you make a decision on the purchase.
If you already are a holder of Hoover 1100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hoover 1100.
However, one of the most important roles played by the user manual is to help in solving problems with Hoover 1100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hoover 1100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
