Instruction/ maintenance manual of the product 0565-5289 Hoover
Go to page of 12
USER INSTRUCTIONS DUST MANAGER GENERA TION FUTURE 0565-5289.indd 1 28/11/2007 15:43:21.
- 2 - IMPOR T ANT SAFETY REMINDERS User’ s manual - This cleaner should only be used for its intended purpose as described in these instructions. Ensure that these ar e fully understood befor e operating this appliance. Only use attachments r ecommended or supplied by Hoov er .
- 3 - DUST MANAGER GETTING T O KNO W Y OUR CLEANER* Handle On/Off switch Cleaner body Door Door release Carpet Care Control Selector Effortless cleaning with your new Hoover DUST MANAGER When rst u.
- 4 - 1 PREP ARING T O USE Y OUR CLEANER PO WER SWITCH SETTING CARPET CARE CONTROL SELECT OR CLEANER LOCK RELEASE Insert handle into body of cleaner . Slide into position. Ensure handle is ush with body of cleaner . Tighten large screw (pre-tted to handle upper hole).
- 5 - CLEANING T OOLS* CLEANING THE ST AIRS ! IMPOR T ANT: When using cleaning tools, the cleaner must be k ept in the upright (park ed) position, par ticularly when cleaning stairs. The carpet height selector should also be set to tool mode: It is danger ous to place the cleaner abov e y ou whilst cleaning the stairs.
- 6 - - 6 - EMPTYING THE DUST CASSETTE Press do wn on door release pad and r emo ve door . Remov e the dust cassette fr om the cleaner using the handle grip on the fr ont. Rotate the BLUE lter pack to the unlock position to release fr om the dust cassette.
- 7 - - 7 - * Featur es vary according to model CLEANING THE FIL TERS* W ashing lter and foam: W ashing pre-motor and exhaust lter : Rotate the BLUE lter pack until the unlock position to release it fr om the dust container . The pre-motor lter should be washed e v ery three months.
- 8 - If your cleaner is not picking up efcientl y , the belt or brushes (or both) ma y need r eplacing, but rst mak e sur e you ha ve: • Emptied the dust container • Cleaned lters • Check ed for blockages Remo v e hood • Prise off the carpet care contr ol selector • Remov e hood scr ews A and B.
- 9 - Environment - W eee Dir ective This appliance is marked according to the European directive 2002/96/EC on W aste Electrical and Electronic Equipment (WEEE).
- 10 - ® User checklist If your cleaner is not w orking pr operl y run thr ough the following checklist. 1 Is there a w orking electricity supply to the cleaner? Check with another electrical pr oduct. 2. Is the dust container full or chok ed with ne dust? T o empty the dust container see the instructions on page 6.
0565-5289.indd 11 28/11/2007 15:43:29.
GENERA TION FUTURE Printed in P.R.C 0565 5289 0565-5289.indd 12 28/11/2007 15:43:29.
An important point after buying a device Hoover 0565-5289 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hoover 0565-5289 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hoover 0565-5289 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hoover 0565-5289 you will learn all the available features of the product, as well as information on its operation. The information that you get Hoover 0565-5289 will certainly help you make a decision on the purchase.
If you already are a holder of Hoover 0565-5289, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hoover 0565-5289.
However, one of the most important roles played by the user manual is to help in solving problems with Hoover 0565-5289. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hoover 0565-5289 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
