Instruction/ maintenance manual of the product Y8196A Honeywell
Go to page of 6
1 69-0637—2 D. F. • Rev. 12-94 • ©Honeywell Inc. 1994 • • Form Number 69-0637—2 Y8196A (T8196A Thermostat/ Q682A Subbase) Heating/Cooling New Construction Thermostat/Subbase Package—Installation Instructions Prepar ation Check thermostat and subbase suitability for the heat- ing, cooling, or heating/cooling system.
69-0637—2 2 Installation WHEN INSTALLING THIS PRODUCT… 1. Read these instructions carefully. Failure to follow them could cause a hazardous condition. 2. Installer must be a trained experienced service techni- cian. 3. After installation is complete, check out product op- eration as provided in these instructions.
3 69-0637—2 Outlet Box Mounting (Fig. 4) Use a horizontally mounted outlet box if possible. If a vertical outlet box is used, the subbase must be mounted on a 202689A Cover Plate Assembly (ordered separately). Follow the instructions provided with the cover plate as- sembly.
69-0637—2 4 TAB (2) MOUNTING SLOT (2) CAPTIVE MOUNTING SCREWS THERMOSTAT BASE WALLPLATE OR SUBBASE 35 30 25 20 10 12 11 10 9 8 7 6 5 4 3 2 1 12 1 1 10 9 8 7 6 M8674 MOUNT THE THERMOSTAT Note the tabs on the top inside edge of the thermostat base. These tabs fit the slots molded into the top of the subbase.
5 69-0637—2 Fig. 10—Temperature control levers. HEATING/COOLING SYSTEM Turn on power to the furnace and cooling system. Place the system switch lever to HEAT and fan switch lever to AUTO. Push both temperature setting levers together at least 5 ° F (3 ° C) above room temperature.
69-0637—2 6 Fig. 11—Typical hookup for Y8196A Package (T8196A Thermostat/Q682A Subbase) in heating/cooling system. HEAT OFF COOL ON AUTO H C FAN SWITCH THERMOSTAT BATTERIES SUBBASE M2386A HEAT ANTICIPATOR POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED.
An important point after buying a device Honeywell Y8196A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Honeywell Y8196A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Honeywell Y8196A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Honeywell Y8196A you will learn all the available features of the product, as well as information on its operation. The information that you get Honeywell Y8196A will certainly help you make a decision on the purchase.
If you already are a holder of Honeywell Y8196A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Honeywell Y8196A.
However, one of the most important roles played by the user manual is to help in solving problems with Honeywell Y8196A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Honeywell Y8196A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
