Instruction/ maintenance manual of the product T834C2309 Honeywell
Go to page of 6
TABLE 1—THERMOSTAT MODELS AND APPLICATIONS. Heat Model Switching Anticipator See Number Application System Fan Range Comments Fig. T834C1137 For use in standard HEAT-OFF- ON-AUTO 0.18 to 1.0A TRADELINE; Beige. 3 heating-cooling COOL systems. T834C1541 For use in gas- or SUPER TRADELINE; 4 oil-fired, or central Beige.
2 LOCATION Locate the thermostat about 5 ft. [1.5 m] above the floor on an inside wall in an area with good air circulation at average temperature. Do not mount the thermostat where it can be affected by: — drafts or dead spots behind doors or in corners.
M2323B POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED. JUMPER 1-2 FOR AUTO FAN IN HEATING AND COOLING (ELECTRIC HEAT AND SINGLE STAGE HEAT PUMP SYSTEMS). JUMPER 1-Y FOR AUTO FAN IN COOLING ONLY. JUMPER W-Y FOR SINGLE-STAGE HEAT PUMP APPLICATIONS.
Checkout CA UTION Do not check operation by shorting across termi- nals of system controls. This will damage the heat anticipator. IMPORTANT: To assure accurate temperature control, do not touch or breathe on bimetal of thermometer.
If recalibration appears necessary, proceed as follows: 1. Place the temperature setting lever at the same setting as the thermometer. Remove cover. 2.
Automation and Control Solutions Honeywell Internationals Inc. Honeywell Limited—Honeywell Limitée 1985 Douglas Drive North 35 Dynamic Drive Golden Valley, Minnesota 55422 Scarborough, Ontario M1V .
An important point after buying a device Honeywell T834C2309 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Honeywell T834C2309 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Honeywell T834C2309 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Honeywell T834C2309 you will learn all the available features of the product, as well as information on its operation. The information that you get Honeywell T834C2309 will certainly help you make a decision on the purchase.
If you already are a holder of Honeywell T834C2309, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Honeywell T834C2309.
However, one of the most important roles played by the user manual is to help in solving problems with Honeywell T834C2309. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Honeywell T834C2309 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
