Instruction/ maintenance manual of the product T8132A Honeywell
Go to page of 20
1 69-0803—1 OWNER’S GUIDE 69-0803-1 T8132A/T8132B Electronic Programmable Thermostat.
2 69-0803—1.
3 69-0803—1 T able of Contents Programming Y our Thermostat .................................................................................................... .. 4 Program Schedule ..................................................................
4 69-0803—1 Programming Y our Thermostat The thermostat can be programmed in your hand before it is installed if the batteries are installed or after it is on the wall. If you need to install or replace the batteries, refer to the Maintaining Y our Thermostat section.
5 69-0803—1 depending on the outside temperature and your furnace response time, to give the furnace a head start to heat the house before you arrive home. SLEEP is the time period you can set for an energy-saving temperature while you are sleeping.
6 69-0803—1 Program Schedule Heating Program Schedule W eekdays Star t Time Heating T emperature Cooling T emperature W AKE __________ ____________________ ____________________ LEA VE __________ ___.
7 69-0803—1 IMPORT ANT Batteries are required for operation and programming. When inserting the batteries, set the system s witch to OFF . Remove the battery door (on the ther mostat left side) using a coin at the bottom. See Maintaining Y our Thermostat section.
8 69-0803—1 Use the Time ke ys to program W AKE time and use the T emp ke ys to program the W AKE temperature for Mon-Fri. Repeat the sequence f or LEA VE, RETURN, and SLEEP . Press the Set Schedule ke y until W AKE, SA SU and SET appear on the displa y .
9 69-0803—1 Check Programs Press Set Schedule key repeatedly to view each time and temperature on the display . Press the Run Program key once to return to the program. Cancel a program—Press the Set Schedule key until the program to cancel shows.
10 69-0803—1 Setting System Switch System switching positions control thermostat operation as follows: COOL: The thermostat controls the air conditioning system. OFF: Both the heating and air conditioning systems are off . HEA T: The thermostat controls the heating system.
11 69-0803—1 Maintaining Y our Thermostat Installing Batteries IMPORT ANT Batteries must be installed for prog ram- ming and operation of the thermostat and heating/cooling system. Purchase two AA alkaline batteries; non- alkaline batteries do not last as long, and can leak causing damage to the thermo- stat or wall surf ace.
12 69-0803—1 starts flashing. If the batteries are not replaced when bAt Lo is flashing, the indicator eventu- ally stops flashing. When bAt Lo stays on without flashing, the thermostat and heating/ cooling system have stopped working and the batteries are almost completely dead.
13 69-0803—1 T roubleshooting Guide I F… THEN… Display will not come on. • Set the system switch to OFF. Remove the batteries. Insert backward for at least five seconds to reset the thermostat. Correctly replace the batteries. Display should come on.
14 69-0803—1 Heating will not come on. • Check that the switch on the thermostat is set to HEAT. Allow a minimum of five minutes for time guard protection to expire. • Check the system fuse or circuit breaker and replace or reset, if necessary. • If the display is blank or displays bAt Lo , install fresh batteries.
15 69-0803—1 Cooling will not come on. • Make sure the outdoor disconnect is engaged (on). (Cont) • If the temperature setting is lower than the current temperature, and the SYSTEM ON indicator is lit, move the system switch from COOL to OFF for ten minutes.
16 69-0803—1 NO TICE This equipment is a Class B digital apparatus, which complies with Canadian Radio Interference Regulations, CRC c.1374. The thermostat current temperature setting does not match.
17 69-0803—1 Notes.
18 69-0803—1 Notes.
19 69-0803—1 Limited One-Y ear W arranty Carrier warrants this product, excluding battery , to be free from defects in the workmanship or materials, under normal use and service, for a period of one (1) year from the date of purchase b y the consumer.
20 69-0803—1 Printed on recycled paper containing at least 10% post-consumer paper fibers. 69-0803—1 J.S . Re v . 5-96 Printed in U.S.A. Copyright © 1996 Honeyw ell Inc. All Rights Reserved www .honeywell.com/yourhome Home and Building Control Honeywell Inc.
An important point after buying a device Honeywell T8132A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Honeywell T8132A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Honeywell T8132A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Honeywell T8132A you will learn all the available features of the product, as well as information on its operation. The information that you get Honeywell T8132A will certainly help you make a decision on the purchase.
If you already are a holder of Honeywell T8132A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Honeywell T8132A.
However, one of the most important roles played by the user manual is to help in solving problems with Honeywell T8132A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Honeywell T8132A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
