Instruction/ maintenance manual of the product MX7 Honeywell
Go to page of 358
MX7 Tecton™ Mobile Computer with Microsoft ® Windows ® Mobile 6.5 User’s Guide.
Disc laimer Honeyw ell Inter national Inc. (“HII”) reser ves the right to make changes in specifications and ot her information contained in th is document without pr ior notice, and the reader should in all ca ses consult HII to deter mine whether any such changes hav e been made.
i Chapter 1 - MX7 Tect on Agency Compliance Laser Warnin gs ................ ................... ....................... ....................... ................... ............. ......... ........ 1-1 Laser Labe l Location .............. ............
ii Scan Status Indica tor ................ ................... ....................... ....................... ................... ...... ....... 2-11 Toggle Vibrate Indicator ...... ................... ....................... ................... ....
iii Cold Stora ge Configuration ....................... .................... ...................... .................... ..................... 3-6 Cold Storage Battery ....................... ....................... ................... ...............
iv HSM Connect (or LXEC onnect) ....... ................... ....................... ...................... ................... .........5 -5 GrabTime ........ .................... ...................... .................... ...................... ....
v Battery Power .. ................... ....................... ................... ....................... ................... ......... ....5-32 External Powe r ... ....................... ................... ....................... .................
vi Windows Live ...................... ................... ....................... ...................... .................... ......... .......... 5-59 Windows Media .. .................... ...................... .................... ................
vii Options ......... ....................... ................... ................... ....................... ................... .................... ...6-10 Status ........ ................... ....................... ................... ............
viii Symbology Se ttings ............... ...................... .................... ...................... .................... .......... ........ 8-9 Clear Button .................. ................... ....................... ................... ..
ix Launch ................ ................... ....................... ................... ....................... ................... ............ 9-9 LaunchCmd . ....................... ................... ....................... ...................
x Summit Client Utility ........ ....................... ...................... ....................... ................... ........... ..... .......... 11-1 Help ........... ...................... .................... ................... ............
xi Chapter 13 - Battery Charger Unpacking your Battery Charger .. ...................... .................... ...................... .................... ........... ..... 13-1 Introduction ............... .................... ...................... .
xii Spare Battery L ED ........ ...................... .................... ...................... .................... ................. 1 4-10 MX7 Tecton Sys tem Status LED Sta tus when Docked ............. ....................... ................. 14-10 Docking and Undock ing the MX7 Tecton .
xiii Removing the MX7 Tecton from a Po wered Vehicle Cra dle ............... ....................... .............. 14-36 Powered Vehicle Cr adle Help ................ ................... ....................... ................... ...................
xiv.
1 - 1 1 MX7 T ecton Agency Compliance MX7 T ecton mobile computers meet or exceed the requirements of all applicable standards organ izations for safe operation. Howe ver , as with any electrical equipment, the best wa y to ensur e safe operation is to operate them accord ing to the agency guidelines that follo w .
1 - 2 This equipment has been tested and found to comply with the limits f or a Class B digital device pursuant to par t 15 of the FCC Rules. These limits are designed to provi de reasonab le protection against har mful in terference in a residential installa tion.
1 - 3 CE Mark The CE mar king indicates compliance with the f ollowing directives: • 1995/5/EC R&TTE • 2011/65/EU RoHS (Recast) In addition, complies to 2006/95 /EC Low V oltage Directive, w hen shipped w ith recommended power supply . European contact:: Honeywell shall not be liable f or use of our product with equ ipme nt (i.
1 - 4.
2 - 1 2 Getting Star ted Overview The MX7 T ecton™ is a rugged, por table, hand-held mobile comp uter capab le of wireless data communications. The MX7 T ec- ton can transmit information using an 802.11 network card and it can store information for later transmission through an RS232 or USB por t.
2 - 2 Initial Setup fo r MX7 T ecton F ollowing are steps you might tak e when setting up a new MX7 T ecton. Follo w the links f or fur ther instruction for each step . Co n- tact Technical Assistance (page 16-1 ) if y ou need additional help. Note: Installing or removing accessories shoul d be performed on a clean, well-lit surface.
2 - 3 Components Fr ont View 1. Scanner/Imager Aperture 2. Speaker 3. System Status LED 4. Scan Button 5. Orange Key (Sticky Key) 6. Blue Key (Sticky Key) 7.
2 - 4 Back View I/O P or t and Cables Input / Output P or t (I/O) Cable: Multipurpose RS232 and Po wer (MX7055C ABLE) Cable: Multipurpose USB and P ower (MX7052CABLE) 1. Scanner/Imager Aperture 2. Stylus and Stylus Pocket 3. Trigger Handle Attach Points 4.
2 - 5 Adapter/Cable: A udi o (MX7060CABLE) Adapter : RS232 PC por t to D9 male (MX7058CABLE) Scanner / Imager Aper ture Caution: Never stare directly into the beam aperture.
2 - 6 Handle Handstrap 1. Imager / Scanner Aper- ture 2. Trigger 3. Handle 4. Tether Attach Point 1. Handstrap 2. Handstrap Retainer Bracket and mounting screws 3.
2 - 7 Ke ypads 55 Ke y Primary Delete ANSI Keypad 55 Ke y Primary Backspace ANSI K eypad 1. System Status LED 2. Volume Control Icon 3. On Off Button 4. Scan Status LED 5. Orange Key (Sticky Key) 6. Blue Key (Sticky Key) 7. Enter Key 8. Scan But ton 9.
2 - 8 32 Ke y Numeric-Alpha Ke ypad Locking and Unloc king the MX7 T ecton Locking the MX7 T ecton The MX7 T ecton can be locked manually b y tapping Start > Lock . By def ault, this option is included on the Star t screen at the bottom of the screen.
2 - 9 Rebooting the MX7 T ecton When the Desktop/Star t scree n is display ed o r an application begins, the power up sequence i s complete. If you ha ve pre vi- ously sav ed your settings, they will be restored on reboot. Appli cation panel changes are sav ed when OK is tapped on an appli- cation proper ti es panel.
2 - 10 Inser ting and Remo ving the Batter y P ack Note: The battery should not be replaced in a dirty, h arsh or hazardous environment. When the batte ry is not connected to the MX7 Tecton, any dust or moisture that enters the battery we ll or connector may transfer to the battery/well termin als, potentially causing damage.
2 - 11 LEDs and Indicators The Scan Status ov al shaped indicator is situated below the ke ypad and next to the On button. LEDs (Light Emitting Diode s) are located on the front of the MX7 T ecton. They are: • System Status LED indicates power management status.
2 - 12 T apping the T ouch Sc reen with a Stylus Note: Always use the point of the stylus for t apping or making strokes on the touch scre en. Nev er use an actual pen, pencil, or shar p/ abrasive object to write on the touch screen. Hold the stylus as if it were a pen or pencil.
2 - 13 Setting the Date and Time Zone Note: The first time the MX7 Tecton is powered up, or the device powers up from a reset/cold boot, the time may be reset to the factory default value. Set the current date , time, time zone and assign a daylight savi ngs location using control panels.
2 - 14 Setting T erminal Emulation P arameters Before y ou mak e a host connection, yo u will, at a minimum, need to know: • the alias na me or IP address (Host Address) and • the port number (Telnet Po rt) of the host system to pr operly set up your host session.
2 - 15 Using the Input P a nel / Virtual Ke yboard The input panel / vir tual keyboard is alw a ys av ail ab le when needed e.g., te xt entr y . Place the cursor in the text en try fiel d and, using the stylus: • Tap the Shift key to ty pe one capital letter.
2 - 16 Connecting to Bluetooth Devices Before connecting to Bluetooth De vices: • The system administrator, usi ng the options on the EZPair (or LXEZ Pairing) cont rol pa nel has discovered, paired, connected and disconnected Bluetooth dev ices for the MX7 Tecton.
2 - 17 Attaching the Handstrap Note: Either the trigger handle is attached to the MX7 Tecton or the handstrap is attached, not bot h. In the abse nce of a trigge r handle, the hand strap should be used at all times. The han dstrap is pre-installed on a MX7 Tecton.
2 - 18 Attaching the T rig ger Handle Either the tr igger handle or th e handstrap is attached, not both . Honeyw ell recommends that, in the absence of a trig ger handle , the handstrap be used at all times. Pressing the tr igger on the trigger handle activates the integrated scanner and functions th e same as the Scan b utton on the ke ypad .
2 - 19 Assembling the Carry Case Note: Accessory installation or removal should be perfo rmed on a clean, well-lit surface. When nece ssary, protect the work surface, the MX7 Tecton, and components from electro static discharge. The main batter y can be remov ed and inser ted with out taking the MX7 T ecton out of the carr y case.
2 - 20 1. Connect the MX7 Tecton voice cable I/O co nnector to the I/O port on the MX7 Tecton. 2. Slide the voice cable ends of the headset assembly and the voice cable together unti l they click shut. Do not twist or bend the connectors. 3. Adjust the headset an d microphone.
2 - 21 Connecting the USB Client and P ower Cab le Note: AC/DC Adapter must be a ssembled before this process begi ns. Note: Do not connect AC power to the AC Adapter until instru cted in the following procedure. 1. Holding the cable I/O connector, pinch the catch release buttons in until the ca tches are open.
2 - 22 Assembling the A C/DC P ower Suppl y T o apply ex ter nal pow er to the MX7 T ecton follo w the steps below in sequence. 1. Plug the 3 prong AC adapter cable end into an indoor AC power source (e.g., wall outlet). 2. Firmly press the female end of the power cable into the male connector on th e power adapter.
2 - 23 Star tup Help Issue: Can’t change the date/time or adjust the v olume. Soluti on: AppLock is installed and may be running in User Mode on the MX7 T ecton. AppLock user mode restr icts access to the con- trol panels. Issue: T ouch screen is not accepting styl us ta ps or needs recalibration.
2 - 24.
3 - 1 3 Har d ware Configuration System Har dware 802.11 a/b/g Wi reless Client The MX7 T ecton has an 802.11 network ca rd that suppor ts div ersity with two in terna l antennas. The CPU board does not allow hot sw ap ping the network card. WEP , WP A and LEAP are su ppor ted.
3 - 2 Video Subsystem The touch screen is a 3.5” (8.9 cm) diagonal viewing area, ¼ V GA 320 by 240 pixel TFT Reflectiv e Active Color LCD . Back- lighting is availab le and can be tur ned on and off with ke y sequences. The tur n-off timing is configured through the Start > Settings > Control Pan el > Display icon.
3 - 3 A udio Suppor t Speaker The speaker supplies audib le verification signals norma lly used by the Windows oper a ting system. The speak e r is located on the front of the MX7 T ecton , abov e the MX7 T ecton logo.
3 - 4 Ke ypads 55 Key K eypads Using the 55 K ey Alpha-Numeric K eypad There are three option s a vailab le f or the 55 ke y ke ypa d: 1. 55 key Alphanumeric Keymap - Primary De lete (page 12-1). 2. 55 Key 5250 Alphanumeric KeyMap - Primary Delete (page 12-6).
3 - 5 32 Key K eypad Using the 32 Ke y Numeric with T riple T ap Alpha 32 key Numeric-Alpha Keymap (page 12-16) • When using a sequence of keys that require an alpha key, first pr ess the Alph key. Use the Shft sticky key or the Caps key sequence (Blue+Tab) for uppe r case alphabetic characters.
3 - 6 Display The touch screen display is an active color LCD unit capable of suppor ting V GA graphics mo des. Displa y si z e is 240 x 320 pixels in por trait orientation. The covering is design ed to re sist stains. The touch screen allows signature capture and touch input.
3 - 7 The Li-Ion main batter y (MX7A381BA TT and MX7393BA TT) has been designed specifically f o r the Cold Storage device . This 125 0mAh battery has a blue label while the standard MX7 T ecton 220 0mAh batter y has a white (MX7A380BA TT and MX7392BA TT) labe l.
3 - 8.
4 - 1 4 P o wer Modes and Batteries Po w e r M o d e s The MX7 T ecton has three power modes: On, Suspend and Off . On Mode The Display When the display is On: • the keypad, touch screen and all per.
4 - 2 Batteries The MX7 T ecton is designed to work with a Lithium-Ion (Li-ion ) batter y . Under nor mal conditions it should last app ro xima tely eight to ten hours before requiring a recharge. The more you use the scanner or the wireless transmitter , the shor ter the time required between batter y recharges.
4 - 3 Handling Batteries Safel y • Never dispose of a battery in a fire. This may cause an explosion. • Do not replace individual cells in a battery pack. • Do not attempt to pry open the battery pack shell. • Be careful when handling any ba ttery.
4 - 4.
5 - 1 5 Software Configuration Intr oduction There are se veral diff erent aspects to th e setup and configurati on of the MX7 T ecton. Many of the setup and configuration set- tings are dependent upon th e optional f eatures such as hardware and software installed on the mobile device .
5 - 2 In addition, an API is provided to retur n a standard cop yright st ring, so that applications may ref erence this to be sure they are runn ing on a Honeywell mobile device f or licensing pur poses. Boot Loader The MX7 T ecton suppor ts a propr ietar y boot loader .
5 - 3 Star t Men u The Star t menu consists of applications and f olders. • Selecting an application from the menu starts that applica tion. • Selecting a folder open s a window di splayi ng the content s of the folder. • Selecting Settings displays the Settings panels by cate gory.
5 - 4 Status Icons Additional icons may be display e d at the lo wer edge of the T o da y screen. Note: Summit signal strength icons are disp layed only wh en the Summit Client Utility is controlling the radio. More information on Bluetooth activity and settings can be found in Bluetooth Configuration (page 7-1).
5 - 5 AppLock (Option) The AppLock progr am is accessed by the user or the AppLoc k Ad ministrator at bootup or upon completion of a cold boot. Set parameters using the Administration option in the Settings P anel. Summit SCU (Summit Client Utility) Summit automatically installs and ru ns after e very cold boot.
5 - 6 Synchr oniz e with a local time server • Use ActiveSync to copy GrabTime.ini from the My Device > Windo ws folder on the MX7 Tecton to the host PC. • Edit GrabTime.ini (on the host PC) to add the local time se rver’s domain name to the beginni ng of the list of servers.
5 - 7 MX7 T ecton OS Upgrade Depending on the size of the operating system, the total time required for a successful upgrade may require se veral minutes . The OS upgrade files are unique to your MX7 T ecton physical co nfiguration and date of manufacture .
5 - 8 When the bootloader process is complete, tap the Y es button to reboot to complete the update process. T ap the No button and the update is not complete. When the process i s finished (MX7 T ecton has restar ted), remo ve the SD card, replace the r ubber barrier and replace the main batter y .
5 - 9 Use the up and down arrow k eys on the MX7 T ecton to quickly scroll through the icons, or , using screen touch gestures, br ush the window up or down with a finger or the stylus . ActiveSync. Basic ActiveSync confi guration, incl uding synchronization with an Exchange server.
5 - 10 Remote Desktop (Auto). A shortcut to Remote Desktop Mobile with Connect activated.. Remote Desktop (page 5-67). Display remote desktop. Setup for computer, user name, passwo rd and domain re- quired. Use Options to se tup connected options for the remote desktop.
5 - 11 Office Mobile Settings Excel Mobile (page 5-64). Sprea dsheets can be edited, da ta can be sorted, formatting and changes are pre- served. PowerPoint Mobile (page 5-65). Ope n, view and edit slides in landsca pe or portrait format. Zoom and GoTo fea- tures enabl ed.
5 - 12 P ersonal System About Info (or About LXE) (p age 5-23). View software, hard ware, versions and netw ork IP. No user intervention required. Buttons (page 5-24). Set fun ctions of programmable buttons. Input (page 5-2 6). Set input options for keypa d, touch screen and voice.
5 - 13 License Manager (page 5-37). View li cense information for installed licensed applications. Managed Programs (page 5-37). View install history fo r .
5 - 14 Connections Settings P anels Cloc k & Alarms Time Adjust the settings and tap ok to sav e the changes. Select Y es on the popup box and the changes take effect immedi- ately . The Time can be set for both a Home and a Visiting location. Beam (page 5-50).
5 - 15 Alarms T o set an alarm: 1. Tap the check box to ena ble the alarm. 2. Tap < Description > and enter a description. The descri pti on is limited to 63 characters. 3. Tap the day (or days) to p lay the alarm. 4. Tap the time to set the time to pl ay the alarm.
5 - 16 Lock P asswor d Set the lock / unloc k behavior f or the MX7 T ecton. Pr ompt if phone unused f or T ap the check bo x and set the inactivity timeout before the MX7 T e cton locks . P asswor d type When selecting a Password type the MX7 T ecto n displa ys a numeric keypad or the input panel depending on the type of password selected.
5 - 17 Hint If the pass word entr y isn’t successful after a predefined number of attempts, the passw ord hint is displayed..
5 - 18 Po w e r Repor ts the current batter y state and allows the user to set suspend timeouts. Battery Batter y pow er is display ed for both the main and inter nal Super-cap batteries (backup battery ).
5 - 19 Adv a nced Select the inactivity timeout period bef ore the MX7 T ecton goes into Suspend mode. The settings on this panel are for the suspend timers onl y .
5 - 20 Sounds & Notifications Set volume parameters and assign sound W A V files to Windows Mobile ev e nts . Options that cannot be edited by the user are dimmed. Sounds F ollow the instructions on th e screen and tap OK to sa ve the changes . Changes take eff ect immediately .
5 - 21 Notifications The Event bo x lists se veral ev ents that ca n hav e an asso ciated notifica tion. The notifi cation, depe nding on the e vent selected, ma y consist of pla ying a sound, displaying a scr een message, flashing a light o r triggerin g the vibration motor .
5 - 22 T oday Configure the appearance and the items to display on the T oday screen. Appearance Use the Appearance panel to assign a theme for the de vice. The default theme is Windows Mobile Classic Blue . Any user installed themes are included in the list.
5 - 23 Pe rs o n a l Pa n e l s About Info (or About LXE) The data cannot be edited by the MX7 T ecton user on these panels. Software The Software tab ma y display the current language. All la nguages are b uilt into the OS image; English, F r ench, Ger- man, Simplified Chinese, T raditional Chinese, J apanese, K orea n, Spanish, Thai.
5 - 24 Buttons Pr ogram Buttons Program b uttons can be used to assign functions to ce r tain k eys such as F1 through F5 and the diamond ke ys. Buttons can only be assigned to programs that ha v e an icon in the Star t menu or the Se ttings folder (including sub-folders).
5 - 25 Up/Down Contr ol Customize the dela y before repeating and the repe at rate f or the up/down controls..
5 - 26 Input Input Method Select the pref erred method of input. The default method of input is the k eyboar d or input panel. When the cursor is located in a field allowing text input, the input panel may automatically be displa y ed.
5 - 27 W or d Completion Options.
5 - 28 Owner Information Set the MX7 T ecton owner details. Enter the information and tap ok to sav e the changes. The changes take effect immediately . Note: Owner Identification name listed in Start > Settings > P erso nal > Owner > Inf ormation is not used during Blueto oth operation.
5 - 29 System P anels About The About panels sh ow OS versions, allo w device name and descr iption input and display cop yright information . Ve r s i o n This screen displays inf or mation on the installed operating system and the hardware. Note that Windo ws Mobile is based on a Wind o ws CE engine.
5 - 30 Copyrights This screen is presented for inf or mation only . The Co pyrights information cannot be cha nged by the user ..
5 - 31 Backlight Set the power management timers for the displa y and ke ypad backl ights. Set the displa y br ightness for battery and external power . Brightness Slide the marker left and right to se lect the desired ke ypad and display brightness lev el .
5 - 32 Battery P ower When the MX7 T ecton is on batte ry power and the backlight ti mer expires, the displa y and the backlights f or the displa y and ke ypa d are turned off. Adjust the settings and tap OK to sav e the changes. The changes take eff ect immediately .
5 - 33 Battery This panel is used to view the status and percenta ge of power remaining in the MX7 T ecton main batter y . Jac ked is sho wn in the Status box when the Main battery is receiving external po wer .
5 - 34 Cer tificates Manage digital cer tificates used for secure communication. View – displays details of the cer tificate. P ersonal cer tificates ma y be extended from the view screen. Delete – remov es the cer tificate from the device. Delete is not av ailab le if the cer tificate was installed by a de vice adminis- trator .
5 - 35 Root Encryption This panel e nab les or disables encr yption of data file s on removab le storage cards . The default is Disab led. T ap the check box to encr ypt files when placed on a storage card. This panel lists any installed Root cer tificates.
5 - 36 External GPS This panel confi gures serial GPS access over hardware seri al por ts using the Microsoft GPS manager . The por t used, baud rate and por t sharing must be specifie d.
5 - 37 License Manager Use this option to view software license registration details, an d ser vice contract length f or purchased software installed on the MX7 T ecton. Note the follo wing image is a sample screen. Y our License Ma nager panel may sho w more tabs, e.
5 - 38 Memory These panels repor t the current state of vir tual memor y . Main The split between Storage memor y and Progr am memor y is not adjustable. Storage Card The pop-up list shows all mounted storage, both fix e d and remov able. The Find prompt at th e bottom of th e screen lau nches the Search utility .
5 - 39 Mixer The MX7 T ecton has a speaker located above the scan b utton . It is activ e when a headset is not connected to the device. Use the settings on these pa nels to adjust the volume, record gain and sidetone f or microp hone input, speaker and speaker output.
5 - 40 MX7 T ecton Options Set MX7 T ecton spe cific de vi ce options. Options that cannot be edited by the user are dimmed. Commu nication By default, TCP/IP v ersion 6 is enabled on the MX7 T ecton. T ap to uncheck this chec k box to disab l e TCP/IP v ersion 6.
5 - 41 Status P opup When the Status popup window is enabled, and displa yed, it is placed on top of the w indow in f ocus and hides any data beneath it. The Status P opup window is closed by pressing the assigned Status User or Status Admin ke y sequence.
5 - 42 P eripherals This panel i s used to enable and disable the touch screen heater and scan window heater . Note: Settings have no effect if the touch screen / scan win dow heaters are not installed. Click the radio b utton to enable or disable the heaters .
5 - 43 Regional Settings Regional Settings ha s the same general format and functi on as Regional Settings on a PC..
5 - 44.
5 - 45 Registry Choose an MX7 T ecton softw are reload sche me . Load User Defaults When clicked, a standard load file dialog is opened, to allow the user to pick a Registry Sav e (.RSG) file. The applet then copies the specified User registr y file to the Active registry .
5 - 46 Remove Pr ograms This panel is used to uninstall programs. The Remov e Program listing is f or all programs installed via ActiveSync or via a CAB file.
5 - 47 Align Screen T ap the Align Screen button. The align screen opens and disp la ys a large cross-hair in the middle of the screen. T ap the middle of the cross-hair as it moves around the scre en. When the process is complete, the General screen is dis- play ed.
5 - 48 Te x t S i z e T ap the marker and slide it a cross the bar . As the mar ker mov es, the e xample te xt increases or decreases. T ap ok and the change is saved.
5 - 49 T ask Manager This panel displa ys all running tasks as well as the memory and CPU bandwidth be ing used b y each task. T apping on the column headings at the t op of the screen sort s the ta sks by the contents of that column. T appin g the same heading a second time rev erses the sor t order of that column.
5 - 50 Connections P anels Beam Enable or disab l e receiving OBEX (oBject EXchange is a co mmunications protocol used to e xchange information between mobile devices . The de vices must suppor t infrared co mmunication.) data beams, either b y IrD A (Infrared Data Association, also used as an abbreviation f or the Infrared [IR] por t on devices .
5 - 51 Connections Start > Settings > Connection s > Connections Configure connections to a host PC. Adv anced Options.
5 - 52 Domain Enroll Enroll in Active Directory . T o begin enrollment, tap Enroll in the Status ba r . Contact your system administrator fo r the applic able inf or mation to com- plete the screens.
5 - 53 Netw ork Cards This panel displays a listing of networ k adapters. The list is bas ed on drivers installed i n the registr y whether the adapter i s actually suppor ted by the hardware or not.
5 - 54 USB to PC The option is disabled by def ault. This option can be enabled wh en connection to a host PC using a USB cab le is required. Standar d Micr osoft Applications Note: The intent of this segment is to doc umen t standard Microsoft applications loaded on the MX7 Tecton.
5 - 55 Calendar Contacts Calendar/date book a pplication. Can be synchronized wi th PC Out- look calendar using ActiveSync. Address book application. Can b e synchronized with PC Outlook ad- dress book using ActiveSync.
5 - 56 Email File Explorer Email application. Ca n be synchronized with PC Outlook emai l using ActiveSync or it can synchroni ze with an E xchange server.
5 - 57 Getting Star ted Help This application provides several wizard s to walk a user through de- vice configuratio n. Access Windows Mobile help system on the MX7 Tecton.
5 - 58 Notes Pictures and Video Notes. Notebook app lication. Select Menu > View Recording Tool- bar to create an audio note. Can be synchronized with PC Outlook notes using ActiveSync. Pictures and Video. Picture/video vi ewer application. Can be syn- chronized with PC My Documents folder using ActiveSyn c.
5 - 59 T asks Windows Live Tasks. Task list application. Can be synchronized with PC Outlook task list using ActiveSync. Windows Live. Sign in to Microsoft Windows Live online service.
5 - 60 Windows Media Windows Media. Audio visual ma nagement program. Not supporte d on the MX7 Tecton..
5 - 61 Internet Explorer Mobile Set options for Internet connectivity . The navigation icons change state based on the web page contents. Navigation Icon Action Navigation Icon Action Add folder Favor.
5 - 62 Options.
5 - 63.
5 - 64 Office Mobile A suite of business related applications. Files can be crea ted, op ened, view ed, sav ed in different f ormats, etc. Note: For Microsoft Office Mobile instru ction for Word, PowerPoint, Excel and O neNote, refer to commercially avail able Microsoft Office Mobile user guides.
5 - 65 P owerP oint Mobile Open, view and edit slides i n landscape or por trait format. Zo om and GoT o features enabled. Select Menu > Options to change default settings. W or d Mobile Open, view , edit documents. F ormats are sa ved. Spelling check er , cut and paste are availab le, undo and redo co m- mands.
5 - 66 OneNote Mobile OneNote is an electronic version of a paper note book. Select Menu to change default settings..
5 - 67 Remote Desktop Start > Remote Desktop Mobile Using Remote Desktop Mobile, you can log on to a remote computer running T erminal Ser vices or Remote Desktop and use all the programs a vailab le on that computer fr om your mobile device .
5 - 68 Connect to a Remote Server 1. Configure the radio. 2. Enter the name of the computer to which you want to c onnect. If needed, enter the port number at the en d of the computer name ( remotecomputername : portnumber ). 3. Enter the user name, password and domain.
5 - 69 Installing Applications Applications can be instal led on the MX7 T ecton from CAB files or package files. P ackage files ha ve some unique characteristics: • Package files patch the operating system so they become non-volatile. Even a C lean Boot does not remove the programs.
5 - 70 Issue: The package is already installed or is an older version than installed. Solution: Status unsuccessful. Th e update could not be installed be ca use the update has already been instal led or the package file is an earlier v ersion th an the v ersion currently inst alled on th e MX7 T ecton.
5 - 71 Initial Setup The initial setup of ActiveSync must be made via a USB co nne ction. P ar tne rships can only be create d using USB cable connection. Connect via USB The def ault connection type is USB Client. This is the only connection option suppor ted on the MX7 T ecton.
5 - 72 When the MX7 T ecton loses connection, e.g., enters Susp end Mode, etc., the connection to Activ eSync wil l be lost. When the MX7 T ecton resumes, the Active Sync session will automatically re-connect.
5 - 73 Issue: ActiveSync indicator on the host remains gra y Solution 1: ActiveSync icon on the PC does not turn green after connecting USB ca b le from MX7 T ecton. 1. Disconnect MX7 Tecton USB cable from PC. 2. Suspend/Resume or Re start the MX7 Tecton.
5 - 74 6. Click the OK button to dismiss the About CERDisp dialog box on the MX7 Tecton deskto p by clicking the OK button in the HSM Connect window on the PC desktop. The dialog box automatically times out and disappears after approximately 20 seconds.
6 - 1 6 AppLoc k (Application Locking) Intr oduction AppLock is designed to be run on Windows based de vices only . The AppLoc k program is factory installed. Configuration parameters are specified by the AppLock Administ rator f or the MX7 T ecton e nd user .
6 - 2 • Create/change the password for administrator access. • Assign the name of the applicat ion, or applications, to lock. • Select the command line of the application to lock. In addition to these configuration optio ns, the administrator can vi e w and man age the status logs of AppLock sessions.
6 - 3 P assw or ds A passw ord must be configured. If the pass word is not configur ed, a new device s witches into Administration mode without prompting f or a passw ord.
6 - 4 When the switch k ey sequence is pressed on the keypad, the ne xt application in the AppLock configuration is mov ed to the f oreground (in focus) and the pre vious applic ation mo ves to the backg round. The pr e vious application continues to ru n in the background.
6 - 5 Application Configuration The default Administrator Hotke y sequen ce is Shift+Ctrl+A . Administrator mode allows access to all features on the de vice. When the hotkey is pressed to s wi tch into Administrator mode, a pass word prompt is display ed (if a passw ord has been configure d ).
6 - 6 Global Key De fault is Ctrl+Spc. Select the Global Key key sequence the end user is to press when switching between application s. The Global Key de fault key sequence must be d efined by the AppLock Ad- ministrator. The Global key is presented to the end user as the Activati on key.
6 - 7 Launch Button When clicked, displa ys the Launch option s panel f or t he Filename selected on the Administration panel. Note: Launch order is determined by the Order specified in the Application panel. The Order value does not have to be sequential.
6 - 8 A uto Re-Launch Def ault is Enabl ed. When enabled f or a specific application. automaticall y re -launches it (subject to the specified A uto Re-Launch Dela y in seconds) after it ter minates. This option allows the Administrator to disable the re-launch operation.
6 - 9 Security Setting an Activ ation Hotkey Specify the hotke y sequence that tr iggers AppLock to s witch between administrator and us er modes and the password required to ente r Administrator mode . The def ault hotkey sequence is Shift+Ctrl+A. A 2nd ke y keypress is an in valid k eypress f or a hotkey sequence .
6 - 10 Options AppLock uses 3 timeout v alues when locking applications: Setting Explanation Launch timeout The time to wait for an application to initially launch before timing out.
6 - 11 Status Use the Status panel to view the log of pre v ious AppLock o perations and to configure which messages are to be recorded during AppL oc k operation. Status information is stored in a specific location on th e storage de vice and in a specific logfile specified by the Administra - tor .
6 - 12 Log Note: If a level higher than Error is selected, the stat us should be clea red frequently by the administrator. In addition to the three view le vels the administrato r can sele ct that all status inf o rmation be logged or tur n off all status inf or mation logging completely .
6 - 13 AppLock Err or Messages Any messages whose first word i s an ‘ing’ w ord is outpu t prior to the action described in the mes sage . F or e xample , “Switchi ng to admin-hotkey press” is logged after the admi nistrator has pressed the hotk ey but prior to star ting the s witch process.
6 - 14 Could not create event EVT_HOTKEYCHG The keyboard filter uses this event at the Administrator Control panel. The event could not be created. LOG_ERROR Could not hook key- board If the keyboard cannot be controlled, AppLock cannot process the hotkey.
6 - 15 Encrypt hash dat a fail- ure Unable to encrypt password. LOG_ERROR Encrypt hash data from pwd OK Encrypt password proc ess successful. LOG_EX Encrypt length failure Unable to encrypt password. LOG_ERROR Encrypt out of memory for key Unable to encrypt password.
6 - 16 Exit ToAdmin Exiting the function that handles t he mode switch into admi n mode. LOG_PROCESSING Exit ToUser Exiting the user mode switch function. LOG_PROCESSING Exit ToUser-Registry read failure The AppName val ue does not exist in the reg istry so user mode cannot be en- tered.
6 - 17 Opened status file The status informa tion is be ing saved to a file and the file has been opened suc- cessfully. LOG_EX Out of memory for en- crypted pw d Not enough memory to encrypt the password. LOG_ERROR pRealTaskbarWn d- Proc already set The taskbar control has already bee n installed.
6 - 18 Switching to admin - registry read failure See the explanation of the “R egistry read failure” abov e. AppLock is switching into Admin mode. If a password has been configured, the prompt will be dis- played and will not be dismi ssed until a valid password is entered.
7 - 1 7 Bluetooth Configuration Intr oduction Contact Technical Assistance (page 16-1) for upg rade av ailab ility if y our Bl uetooth panels are not the same as the panels pre- sented in this section. Discover and manage pairing with nearby Bluetooth devices.
7 - 2 3. Chan ge the Computer Friendly Name at the bottom of the Se ttings display. The Bluetooth MX7 Tecton defaul t name is determined by the factory installed software version. Honeyw ell strongly urges assigning every MX7 Tecton a unique name (up to 32 ch aracters) before Bluetooth Di scovery is initiated.
7 - 3 Bluetooth Devices The Bluetooth Devices tab displa ys any device pre viously di sco vered and paired with the MX7 T e cton. Clear Button Deletes all devices from the De vice table that are not currently paired.
7 - 4 Discov ering 1. Tap the Discover button to locate all discovera ble Blue tooth devices in the vicinity. The Discovery process also queries for the unique identifier of each device discovered. 2. Tap the Stop Button at any time to end the Discover and Query for Unique Identifie r functions.
7 - 5 Bluetooth D evice M enu 1. After the Discover button has been tapped and there are device s listed, tap on a device in the list to highlight it. 2. Double-tap the highlighted device to disp lay the Bluetooth De vice right click menu. The Bluetooth d evice does not need to be active .
7 - 6 Bluetooth Pr operties Data on the Bluetooth Proper ties pane l cannot be changed by t he user . The data display ed is th e result of the de vice Quer y perf or med during the Discov ery process. The Status dialog box reflects the curr ent state of the highlighted device .
7 - 7 Options Option Functio n Computer is connectable This option is Enabled (checked) by defa ult. Disable this option to inhibit MX7 Tecton c onnection initiated by a Bluetooth scanner. Computer is discoverable This option is Disabled (unchecked) by default.
7 - 8 Reconnect Note: These options can still be checked or unchecked whether Bluetooth connection is enabled or disab led. Options Option Functio n Report when connection lost This option is Enabled (checked) by de fault. There may be a n audio or visual signal when a conne ction between a paired, active device is lost.
7 - 9 About This panel li sts the pre-assigned Comp uter F r iendly Name (that other de vices ma y discov e r during their Discov er y and Quer y process), the Bluetooth client MAC address , and software v ersion le vels. The data cannot be edited b y the user .
7 - 10 Bluetooth Indicators The Bluetooth icon state changes as Bluetooth devices are discov ered, pa ired, connected and disconnected. There may be audible or visual signals as paired d e vice s re-connect with the MX7 T ecto n.
7 - 11 MX7 T ecton with Label If the MX7 T ecton has a Bluetooth address bar code label attached, f ollow these steps: 1. Scan the Bluetooth address bar code label, attached to the MX7 Tecton, with the Blueto oth mobile scanner.
7 - 12 Bluetooth Reader Beep and LED Indications Bluetooth Mobile Device Beep Type Bluetooth Mobile Device LED Upon star tup , if the Bluetooth mobile scanner sound s a long tone , this means the scanner ha s not passed its automati c Selftest and has entered isolation mode.
8 - 1 8 Data Collection W edge Intr oduction Set scanner/imager keyboard wedge parameters , enable or disable symbologies from being scanned, scanner icon appear- ance, active scanner por t, and scan ke y settings. Assign baud rate, parity , stop bits and data bits for av ail ab le COM por ts.
8 - 2 Data Pr ocessing Overview Bar code data processing inv olves se veral steps. Some steps ma y be skippe d during the processing depending on user sele c- tions on the Symbology Settings pa nels. The steps are presente d bel ow in the order they are performed on the scanned data .
8 - 3 Main The Data Collection W e dge suppor ts up to three co ncurrent data collection devices. F or example , the inter nal scanner could be used to collect data at the same time a Bluetooth scanner is pai red and/or a seri al de vice is attached to COM1 .
8 - 4 Continuous Scan Mode Note: Do not scan decoder engine configur ation bar code s when Continuous scan mo de is on. Configuratio n bar codes do not decode when scann ed while Continuous Mod e is On. Continuous scan mode is only av ailable if the MX7 T e cton is equipped with a Symbol or a Honeywell scanner .
8 - 5 COM1 does not suppor t 5V s witchable pow er on Pin 9 f or tethered scanners. Notification Use this panel to toggle inter nal scanner sounds on and off . Internal scan ner sound, by def ault, is enabled. Vibrat ion Enable Good scan vibration or Bad scan vibration when a ta ctile response on a good scan or bad scan is desired.
8 - 6 Since the Data Collection Wedge uses the operating system interface to emit sounds /beeps, if the v olume/vibrate icon is set to anything other than On, W e dge beeps do not sou nd.
8 - 7 Data Options Bar code manipulatio n parameter settings on this tab are applie d to the incoming data resulti ng from successful bar code scans sent to the MX7 T ecton fo r processing. Note: The Data Options tab co ntains only those options available for one type of de coding engine.
8 - 8 The HHP Proper ties button is only present if the MX7 T e cton is equipped with a Hand Held Products (HHP) image r . 1. Choo se an option in the En able Code ID drop-down box: • None •A I M • Honeywell •S y m b o l • HHP •C u s t o m .
8 - 9 Enable Code ID Options Depending on the model of the scanner insta lled, some combination of the f ollowing IDs are listed. None Programs the internal scanner to disable transmission of a Code ID . The only en try in the Symbology popup list is All.
8 - 10 The Code ID drop down bo x only filters the av ai lab le symbologies in the Symb ology drop down bo x by the selected Code ID . This Code ID box does not enable or disable the Code ID as that function is controlled by the Enab le Code ID box on the Data Options tab .
8 - 11 When All is selected in the Symbology field and the setti ngs are changed, the setti ngs in this dialog become the def aults, used unless overwritten by the settings for individual symbolog ies. This is also true f or Custom IDs, where the code IDs to be stripped are specified by the user .
8 - 12 The operation of each type of stripping is defi ned below: Leading This strips the number of characters specified from the beginning of the coll ected data (no t including Code ID). The data is stripped unco nditionally . This action is disab led by def aul t.
8 - 13 Clear All When no item in the Custom IDs list is selected, tappin g the Clear All b utton clears the Custom ID list a nd any text written (and not yet added or inser ted) in the Name and ID Code text bo xes. Remove The Clear All button changes to a Remov e button when an item in the Cust om IDs list is selected.
8 - 14 The prefix is added to the output buff er for the Symbology selected from the pulldown list. If ‘All’ is selected, the prefix is added for any symbology that has not been specifically configured. Add Suffix T o enab le a suffix, check the Suffix chec k bo x and enter the desired string in the te xtbox.
8 - 15 HHP Symbologies Advanced proper ties are av ailable when an integrated Hand Held Prod ucts imager is installed i n the MX7 T ecton. Advanced proper ties are applicable regardless of the ID type selected (AIM or HHP). HHP = Hand Held Products. Not all HHP symbolog ies hav e Advanced options.
8 - 16 Codabar - Adv anced Properties Check Characte r Required – When enabled, the check character is required. Def ault is disabled. T ransmit – When enabled, the check character is transmitted. Default is disabled. Start / Stop Character T ransmit – When enabled, the star t / stop char acters are transmitted.
8 - 17 Code39 - Adv anced Properties Check Characte r Required – When enabled, the check character is required. Def ault is disabled. T ransmit – When enabled, the check character is transmitted. Default is disabled. T ransmit Star t / Stop Character – W hen enabled, the star t / stop characters are transmitted.
8 - 18 EAN8 - Adv anced Proper ties T ransmit Check Character – When enabled, transmit the check character . Default is enabled. Addenda Read 2-Digit – When enabled, transmit the 2 digit addenda. Default is disabled. Read 5-Digit – When enable, tr ansmit the 5 digit addenda.
8 - 19 EAN13 - Adv anced Properties T ransmit Check Character – When enabled, transmit the check character . Default is disabled. Addenda Read 2-Digit – When enabled, transmit the 2 digit addenda. Default is disabled. Read 5-Digit – When enable, tr ansmit the 5 digit addenda.
8 - 20 Interleaved 2 of 5 - Adv anced Properties Check Characte r Required – When enabled, the check character is required. Def ault is disabled. T ransmit – When enabled, the check character is transmitted.
8 - 21 Mesa - Adv anced Properties UPCA – When enabled, decode UPCA Mesa. Default is disab led. EAN13 – When enabled, decode EAN 13 Mesa. Def ault is disabled. Code39 – When en ab led, decode Code 39 Mesa. Default is disabled. Code128 – When enabled, decode Code 128 Mesa.
8 - 22 MSI - Adv anced Properties T ransmit Check Character – When enabled, transmit the check character . Default is enabled..
8 - 23 OCR Pr oper ties - Ad vanced Font – Font selection. Def ault is disabled. •A = O C R A •B = O C R B • Money = OCR Money • MICR = Magnetic Ink Character Recognition Direction – Decoder reads OCR fonts in an y direction, bu t setting direction parameter corre ctly can increase decoding speed.
8 - 24 2. To read the same string with a modulo 10 check digit in the seve nth character position, use the fol lowing tem- plate: aaaaaac Then enter 0123456789 for the Chec k parameter .
8 - 25 Planet - Adv anced Properties T ransmit Check Character – When enabled, transmit the check character . Default is enabled. P osicode - Adv anced Pr operties Limited La bels – Select the typ.
8 - 26 T elepen - Ad vanced Pr operties Origina l Output – When enabled, output is Origin al T elepe n. When disabled, output is AIM. Def ault is enabled. UPCA- Adv anced Properties T ransmit Check Character – When enabled, transmit the check character .
8 - 27 Inser t Separator – When enabled, inser t a space between the code and addenda. Default is enab led. Note: An EAN 13 decoding al gorithm will also decode UPCA la bels. For correct operatio n, either disable the EAN 13 symbology when using UPCA labels or con figure the EAN 13 settings to match the UPCA settings.
8 - 28 UPCE1- Adv anced Properties Note: The UPCE0 and UPCE1 pa rameters are always set to match each other. Therefore if a change is made to a parameter to either the EPCE0 or UPCE1 Advanced Prope rties that same chang e is automatically made to the Advanced Properties for the other symbology.
8 - 29 HHP Properties When the MX7 T ecton is equipped with a Hand Held Products ima ger , this option is used to configure imag er scanning parameters. Option Action Centering The centering feature is used to allow the us er to accurately scan a selected bar code among a group of bar codes that ar e located closely together.
8 - 30 Ctrl Char Mapping The Ctrl Char Mapping button on the Data Op tions tab activates a dialog to define the operations the Data Collection W edge performs on control characters (values less than 0x20) embedded in bar code s . Control characters can be repl aced with user-defined text which can include hat encoded or hex en coded values.
8 - 31 value 0x0d receiv ed in any scanned bar code (or defined in the prefix or suffix) will be replaced with th e v alue 0x0a. The Wedge then sends Ctrl +J to the rece iving applicati on, rather than Ctrl+M. List Box The list box sho ws all user-defined control characters and their assigned replacements.
8 - 32 Name text bo x Name is the descr iptor that is used to id entify the custom Code ID . Names must be unique from each other ; how ev er , the Name and ID Code may hav e the same value. Name is used in the Symbology drop down bo x to identify the cus- tom Code ID in a user-fr iendly manner.
8 - 33 Control Code Repl acement Examples Bar Code Processing Examples The follo wing table shows e xamples of str i pping and prefix/suffix con figurations.
8 - 34 Rejected bar codes generate a bad scan beep. In some cases, the receipt of data from the scan ner triggers a go od scan beep (from the e xter nal scanner), and then the rejection of scanned bar code data by the processing causes a bad scan beep on the sa me data.
8 - 35 Length Based Bar Code Stripping Use this procedure to create symbolo gy rules for tw o bar codes w ith the same symbology but with different discrete lengths. This procedure is not applicable for bar codes with v a riable lengths (f a lling between a maximum v alue and a mini- mum val ue) .
8 - 36 5. Tap the Barcode Data button. 6. Tap the Add button. 7. Add the data for the match codes. 8. Refer to the previous secti on Bar Code Data Match List (page 8-12) for instruction.
8 - 37 Pr ocessing The Processing tab contains a user configurable ke y delay that applies to scanned bar codes as they are input when Remote Desktop is the application with the input focus . Note: Settings on this panel have no effect when RFTerm is the applicatio n with the in put focus.
8 - 38 About The About tab lists the version of the Data Col lection W edge (DCWedge) software and the type of laser scan (or imager) engine installed in the MX7 T ecton Valid sca nner / imager types:.
8 - 39 Hat Encoding Hat Encoded Char acters Hex 00 through AD.
8 - 40 Hat Encoded Characters Hex AE through FF.
9 - 1 9 Enhanced Launch Utility Intr oduction The launch utility has two functions: • Process registry based Launch items • Process script based Launch items The registr y based Launch items are proce ssed before the script based Launch items.
9 - 2 • The Order field is used to force a seq uence of events; Order=0 is first, and Order=99 is last. Two items which h ave the same order are installed in the same pass , but not in a predictable sequ ence. • The Delay field is used to add a delay after the item is loa ded, before the next is loaded.
9 - 3 Launch Startup Options The Launch utility use s registr y entries to e nab le or disabl e star tup options. These flags are located in the registr y ke y: HKEY_LOCAL_MACHINESoftw areLXELaunch These can be configured usin g RegEdi t.
9 - 4 Script Based Launch Items Note: Script Based Launch items (documented here) are processed after Registry Based Launch items, see Registry Based Launch Items (page 9-1). The Enhanced (scr ipt based) por tion of th e Launch utility provides se veral f eatures: • Launch .
9 - 5 P arameters are separated by a single comma. If a par ameter requires a comma within it, the whol e parameter must be enclosed in quote mar ks ("). Extr a spaces are i gnored between the comma and the next parameter . For Example T o delete a file called Ive, g ot, commas, in, my, name.
9 - 6 Commands Suppor ted b y Launch The commands suppor ted by Launch are detailed be low . Square br ack ets indicate th at a paramet er is optional.
9 - 7 DelRegKe y ElseIf ElseIfFile Description D eletes a specified registry subkey. Syntax Delregkey , key,subkey Pa ra m e t e r key : The abbreviated major registry key where yo u want to delete th e subkey. Can be one of: • cr or hkcr (HKEY_CLASSES_ROOT) • cu or hkcu (HKEY_CURRENT_USER) • lm or hklm (HKEY_LOCAL_MACHINE).
9 - 8 EndIf EndIfFile EndIfT erm FCopy Description Ends conditional command block begun with the previous IF command. Syntax EndIf Pa ra m e t e r None Example See IfFile (page 9-9). Notes Results are unpre dictable if not paired prope rly with If... command.
9 - 9 IfFile IfT erm Launch Description Be gins the conditional execution of a block of commands only if the specified file exists. Syntax IfFile , file Pa ra m e t e r file : The path and filename to determine if the commands should be exec uted Example IfFile,S ystemMyData.
9 - 10 LaunchCmd Message Mkdir Description R uns a program with arguments. Syntax Launch cmd , program,argum ents,wait-code P arameters program : The full path and filename of the program to be run. arguments : The command l ine arguments for program.
9 - 11 Rmdir SetRegData Description Removes a directory. Syntax Rmd ir , dir P arameters dir : The full path and name of the directory to be removed. Example rmdir,Pr ogram FilesMyApp Notes A directory cannot be removed if it contains files or subdirectories.
9 - 12 SetRegKe y Shortcut Description Ad ds a sub key to the registry. Syntax Setregkey , key,subkey P arameters key : The abbreviated major registry key where y ou want to create the subkey. Can be one of: • cr or hkcr (HKEY_CLASSES_ROOT) • cu or hkcu (HKEY_CURRENT_USER) • lm or hklm (HKEY_LOCAL_MACHINE).
9 - 13 Launch Err or Messages Launch displays a message if it encounters an error during the processing of a script. It is possible to get cascading error me s- sages, as Launch does not stop processing the script if it encounters an error .
9 - 14 Example Script File iffile,Systemapplock.cab launchcmd,Windowswceload.exe,"/n oaskdest /noui Systemapplock.cab",w launch,Windowsapplockprep.exe,c endiffile launchcmd,Windowswceload.exe,"/n oaskdest /noui Systemwedge.cab",w iffile,Systemsummit.
10 - 1 10 Enabler Installation and Configuration Intr oduction This section discusses Honeywell suppor ted f eatures of W av elink A valanche Mobile De vice Ser v ers.
10 - 2 Enabler Uninstall Pr ocess T o remov e the A valanche Enabler from the MX7 T ecto n: • Delete the Avalanche folder lo cated in the System directory. • Warm boot the MX7 Tecton. The A v alanche folder cannot be deleted while the Enabler is running.
10 - 3 T o configure the Av alanche Enabler management of the networ k and wireless settings: 1. Open th e Enabler Setting s Panels by tappin g the Enabler icon on the desktop. 2. Select File > Settings . 3. Select the Adapters tab. 4. Choose settings for the Use Manual Settings parameter.
10 - 4 User Interface The Enabler can be configured and controlled manually through t he user interface on the MX7 T ect on. This section d etails the functionality that can be controlled by the user or system administrator . Screen displays sho wn in this section are designed to present th e end-user with information graphically .
10 - 5 File Menu Options Connect The Connect option under the File menu allows the user to in itiate a manual connection to the Mobile Device Server . The connection methods, by def ault, are wireless and COM conne ctions. An y updates av ailable will be applied to the MX7 T ecton immediately u pon a successful connection.
10 - 6 A valanc he Update using File > Settings Use these menu options to setup the Av alanche Enabler on the MX7 T ecton. Change settings and save the changes (reboot) before connecting to the network.
10 - 7 Connection Setting Function Avalanche Server Address Enter the IP Address or hos t name of the Mobile Device Server assigned to the MX7 Tecton. Check Serial Connection Indicates whether the Ena.
10 - 8 Execution Note the dimmed options on this MX7 T ecton pane l. This menu option is designed to man age downloaded applications f or automatic e xecution upon startup. Setting Function Auto-Execute Selection An application that has been in stalled with the Avalanche Management system can be run automatically following each boot.
10 - 9 Server Contact Note: Your MX7 Tecton screen display may not be exactly as shown above. Conta ct Technical Assistance (page 16- 1) for upgrade availability and version information . Setting Function Sync Cl ock Reset the time on the MX7 Tecton ba sed on the time on the Mobil e Device Server host PC.
10 - 10 Data The Data tab con trols when data is transferred betw een the MX7 T ecton and the Mobil e De vi ce Server . Setting Function Transfer Data When Device is Idle When enabled, pe riodi c updates from the Mobile Device Server are post- poned until the MX7 Tecton has b een idle for the specified period of time.
10 - 11 Preferences F or best results, use AppLo c k to manage the taskbar . AppLock (Application Lo cking) (page 6-1) is resident on each mobile de vice. Administration By default, Keep settings unlocked for 10 minutes is disabled (check bo x is blank).
10 - 12 Activity Log Setting Function Log Level Use this option to control the level of detail re corded in the log file. The default is No Activity Log. • No Activity Log - No log file is written. • Critical - Only critical errors written to the log files.
10 - 13 Ta s k b a r F or best results, use AppLo c k to manage the taskbar . AppLock (Ap plication Locking) (page 6-1) is resident on each mobile de vice. The Display State options control the appearance of the taskbar while using the Enabler interface .
10 - 14 Scan Config functionality is a standard option of the W av eli nk Av alanche MC system but is not currently supported on the MX7 T ecton..
10 - 15 Display The user interface f or the Enabler can be configured to dy namically change based on the status of the MX7 T ecton connection with the Mobile De vice Server . Setting Function At startup Default is Half Screen. Option s are Half screen, Hidden or Full screen.
10 - 16 Shortcuts F or best results, use AppLock f or this functi on. AppLock (Application Locking) (page 6-1) is residen t on each mobile de vice. Configure shor tcuts to other applications on the MX7 T ect on. Sho rtcuts are vi e wed and activated in the Progr ams panel.
10 - 17 SaaS Use to configure the Enabler to connect with A valanche on Demand. This is a Software-as-a-Ser vice v ersion of A va- lanche. Using either of the Saa S configuration option s below assumes the user has registered with W avelink. Setting Functio n Disable SaaS No SaaS connecti on is used.
10 - 18 Adapters Note: Review the MX7 Tecton network settings configuration utilities and the default valu es before setting All Adapters to Enable in the Ad apters applet .
10 - 19 Manual Settings Pr operties Do not enable “Manage Wireless Settings” f or Summit Client devices . Note: When you down load a profile that i s configured to manage network and wireless sett.
10 - 20 Status The Status panel displays the current stat us of the MX7 T ecton network adapter sele cted in the drop down bo x. Note the av ailability of the Windows standard Refresh button. When the Wind o ws Refresh button is tapped, the signal st rength, sign al quality and link speed are refreshed f or the currently selected adapter .
10 - 21 Exit The Exit option is pa ss word protected. The d ef ault pa ss word is leave . The password is not case-sensitiv e. Depending on the behavior chosen fo r the Shutdown setting the follo wing screen ma y be display e d: Note: The icon on the screen above ma y differ based on th e version of the Enabl er installed on the MX7 Tecton.
10 - 22 Using Remote Management 1. Configure the radio to connect to the network running the Mobile Device Server. After the MX7 Tecton is connected, proceed to step 2. 2. If it is desired to configure the radio using the Summit pack age, add the configured packa ge to the Wavelink Avalanche MC Console and enable it.
10 - 23 5. If the passwords match, the bar code data is processed and the screen is updated to reflect the number of bar codes included in th e set. 6. If the passwords do not match, a n error message is displaye d. Th e current screen can be closed using the X bo x in the upper right corner.
10 - 24.
11 - 1 11 Wireless Netw ork Configuration Intr oduction The Summit client device is a Summit 802.11a/b/g radio , capable of 802.11a, 802.11b and 802.11g data rates .
11 - 2 Summit T ray Icon The Summit tray icon is display ed when: • The Summit radio is installed and active • The Windows Zero Config utility is not active • The Tray Icon setting i s On T ap the icon to launch the SCU .
11 - 3 Create a New Netw ork Connection 1. Tap on the Wi-Fi icon. A list of available networks is displ ayed. 2. If the desired network is not displaye d, tap Add New .
11 - 4 3. Enter the SSID of the d esired net work in the Network name text box. Be su re to check the This is a hidden networ k check box for a non-broadcast SSID.
11 - 5 Switch Contr o l to SCU 1. To switch back to SCU control, select any other profile except ThirdPartyConfig in the SCU Active Config drop down list on the Main tab. 2. A message appears that a Power Cycle is r equired to make se ttings activate properly.
11 - 6 The Admin Login button pro vides access to editing wireless parameters. Profile and Global ma y only be edited after enter- ing the Admin Login passw ord. The pass word is case-sensitive . Once logged in, the button label ch anges to Admin Logout.
11 - 7 Enter the Admin pass word (the def ault pass word is SUMMIT and is case sensitiv e ) and tap OK. If the pass word is incorrect, an error message is display ed. The Administrator default pass word can be changed on the Gl obal (page 11-13). The end-u ser can: • Turn the radio on or off on the Main tab.
11 - 8 Profile Note: Tap the Commit button to save changes before leaving th is panel or the SCU. If the panel is exited before tapp ing the Commit button, changes are not saved! When logged in a s an Admin, see Admin Lo gin (page 11-6), use the Profile ta b to manage profiles.
11 - 9 Buttons New Button Creates a new profile with the default settings (see Profile Parameters) and prompts f o r a unique name. If the name is not unique, an error message is displa yed and the new profile is not create d. Rename Button Assigns a new , unique name.
11 - 10 Pr ofile P arameters P arameter Default Explanation Edit Profile Default A string of 1 to 32 alphanumeric characters, establishes the name of the Profile. Options are Def ault or ThirdPart yConfig. SSID Blank A string of up to 32 alphanumeric ch aracters.
11 - 11 Status This screen provides information on the radio: • The profile in use. • The status of the radio card (dow n, associated, authenticated, etc.
11 - 12 Diags The Diags screen can be used for troub leshooting network traffic and radio connectivity issues. • (Re)connect – Use this button to apply (or reapply) the current pr ofile and attempt to associ ate or authenticate to the wireless LAN.
11 - 13 Global The parameters on this panel ca n only be changed when an Admin is logged in with a passw ord. The current values f or the parameters can be viewed b y th e general user without requir ing a pass word. Note: Tap the Commit button to save changes.
11 - 14 Custom P arameter Option The parameter Custom option is not suppor ted. The parame ter value is displa yed as “Custom” when the operating sys- tem registr y has been edited to set the Summit pa rameter to a v a lue that is not av ailable from the parameter’ s drop down list.
11 - 15 Ad Hoc Channel 1 Use this parameter when the Radio Mode profile parameter is set to Ad Hoc. Specifies the channel to be used for an Ad Hoc connection to another cl ient de- vice. If a channel is sele cted that is not supported by the by the radio, the defa ult value is used.
11 - 16 Note: Tap the Commit button to save changes. If this panel is closed before tappin g t he Commit button, changes are not saved! LED Off The LED on the wireless card is not visible to the user when the wire less card is installed i n a sealed mobile device.
11 - 17 Sign-On vs. Stored Credentials When using wireless secur ity that requires a user name and pas sw ord to be entered, the Summit Client Utility offers the f ollow- ing choices: • The Username and Password may be entered on the Credentials screen .
11 - 18 10. Verify the device is authen ticated by reviewing the Status tab. When the device is p roperty configured, the Status (page 11-11) indica tes the device is Authenticated and the method used. 11. The sign-on scree n is displayed afte r a reboot.
11 - 19 Windows Certificate Store vs. Cer ts P ath Note: It is important that all dates are correct on the MX7 Te cton and host computers when using an y type of certificate. Certificates are date sensitive and if t he date is not correct authentication will fail.
11 - 20 6. Uncheck the Use full trusted store check box. 7. Select the desired certificat e and tap the Select button to return the se lected certificate to the CA Cert textbox. 8. Tap OK to exit the Credentials screen and then Commit to save the profile changes.
11 - 21 Configuring Pr ofiles Use the instructions in this secti on to complete the entries on the Profile tab according to the type of wireless security used by your netw ork. The instr uctions that f ollow are the minimum r equired to successfully connect to a netw or k.
11 - 22 WEP T o connect using WEP , make sure the f ollowing profile options are used. 1. Enter the SSID of the Access Point assig ned to this profile. 2. Set EAP Type to None. 3. Set Encryption to WEP or Ma nual WEP (depending on SC U version). 4. Set Auth Type to Open.
11 - 23 LEAP T o use LEAP (without WP A), make sure the f ollowing profile options are used. 1. Enter the SSID of the Access Point assig ned to this profile. 2. Set EAP Type to LEAP. 3. Set Encryption to WEP EAP or Au to WEP (depending on SCU version).
11 - 24 9. Tap OK then tap Commit. 10. Ensure the correct Active Profile is selected on th e Main Tab a nd perform a Suspend/Resume. The SCU Main tab shows the device is associated after the radio connects to the network.
11 - 25 PEAP/MSCHAP Note: The date must be properly set on the device to authenticate a certificate. T o use PEAP/MSCHAP , make sure the f ollowing profile options are used. 1. Enter the SSID of the Access Point assig ned to this profile. 2. Set EAP Type to PEAP-MSCHAP.
11 - 26 9. Enter the DomainUsername (if the Domain is required), otherwise enter the Username. 10. Enter the password. 11. Leave the CA Certificate File Name blank for no w. 12. Tap OK then tap Commit. Ensure the correct Active profile is selected on the Main Ta b.
11 - 27 PEAP/GTC Note: The date must be properly set on the device to authenticate a certificate. T o use PEAP/GTC , make sure the f o llowing profile options are used. 1. Enter the SSID of the Access Point assig ned to this profile. 2. Set EAP Type to PEAP-GTC.
11 - 28 11. Leave the CA Certificate File Name blank for no w. 12. Tap OK then tap Commit. Ensure the correct Active Profile is sele cted on the Main Ta b. 13. See Windows Certificate Store vs. Certs Path (pag e 11-19) for more information on certificate storage.
11 - 29 WP A/LEAP T o use WP A/LEAP , ma k e sure the following profile options are used. 1. Enter the SSID of the Access Point assig ned to this profile.
11 - 30 9. Enter the password. 10. Tap OK then tap the Commit bu tton. 11. Ensure the correct Active Profile is selected on th e Main Tab a nd perform a Suspend/Resume. The SCU Main tab shows the device is associated after the radio connects to the network.
11 - 31 EAP-F AST The SCU suppor ts EAP-F AST with automati c or manu al P AC pro visioni ng. With au tomatic P AC pro visi oning, the user cre- dentials, whether entered on the sav e d cr edentials screen or the sig n on screen, are sent to the RADIUS ser ver .
11 - 32 8. To use Stored Credentials, tap on the Credentials button. No entries are ne cessa ry for Sign-On Credentials with automatic PAC provisionin g as the us er will be prompted for the Username and Password when co nnecting to the network.
11 - 33 EAP-TLS Note: The date must be properly set on the device to authenticate a certificate. T o use EAP-TLS, make sure the fo llowing profile options are used. 1. Enter the SSID of the Access Point assig ned to this profile. 2. Set EAP Type to EAP-TLS.
11 - 34 9. Enter the DomainUsername (if the Domain is required), otherwise enter the User name. 10. Select a user certificate from the Wind ows ce rtificate store. Use the Browse butt on to loca te the User Cert from the certificate st ore. Highl ight the desi red ce rtificate and press the Select button.
11 - 35 WP A PSK T o connect using WP A/PSK, make sure the f ollowing profile options are used: 1. Enter the SSID of the Access Point assig ned to this profile. 2. Set EAP Type to None. 3. Set Encryption to WPA PSK or WPA2 PSK. 4. Set Auth Type to Open.
11 - 36 Cer tificates Note: Refer to the Security Primer (available on the Honeywel l w eb site) to prepare the Authentication Server and Access Point for communication. Note: It is important that all dates are correct on the MX7 Te cton and host computers when using an y type of certificate.
11 - 37 3. Tap the Download a CA certificat e, certificate chain or CRL link. 4. Make sure the correct root CA cert ificate is selected in the list box.
11 - 38 5. Tap the DER button. 6. To download the CA certificate, tap on the Download CA certi ficate link. 7. Tap the Save button and save the certificate.
11 - 39 8. Install the Root CA Ce rtificate on the MX7 Tecton. Installing a Root CA Cer tificate Note: This section is only i f the Windows ce rtificate store is used. If the certificate store is not used, copy the certificate to the System folder or o ther path specified in the Summit Certs global parameter.
11 - 40 4. Tap the Request a certificate link. 5. Tap the User Certificate link..
11 - 41 6. Tap on th e Submit button. if th ere is a message bo x asking if you want to co nfirm the request, ta p Yes. 7. The User Certificate is issued. 8. Install the user certificate on t he requesting computer by tapping th e In stall this certificate link.
11 - 42 Expor ting a User Certificate 1. Start Internet Explore on the PC that requeste d the certificate. 2. Select Tools > Internet Options > Conten t and tap the Cer tificates button. 3. Make sure the Personal tab is select ed. Highlight the ce rtificate and tap the Export button.
11 - 43 7. When the private ke y is exported, you must e nter the pa ssword, confirm the password and tap Next. Be sure to remember the password as it is needed when installing the certificate. 8. Supply the file name for the certificate. Use the Browse button to select the folder where you wish to st ore the certificate.
11 - 44.
12 - 1 12 K eymaps Intr oduction Sticky ke ys are also known as second function keys . Ctl/Ctrl , Alt, Shft, Blue and Orange k eys are stic ky keys . Sticky k eys do not need to be held down before pressing the ne xt (or desired) key . Y ou can use combined modifie rs on specific ke ys.
12 - 2 Tab Tab Back Tab Orange Tab Up Arrow Up Arrow Down Arrow Down Arrow Right Arrow Right Arrow Left Arrow Left Arrow Insert Blue I (letter i) Insert Orange Ctl Delete Del Home Shft Down Arrow End .
12 - 3 eE fF gG hH iI jJ kK lL mM nN oO pP qQ rR sS tT uU vV wW xX yY zZ AS h f t A BS h f t B CS h f t C DS h f t D ES h f t E FS h f t F GS h f t G HS h f t H IS h f t I JS h f t J KS h f t K LS h f.
12 - 4 TS h f t T US h f t U VS h f t V WS h f t W XS h f t X YS h f t Y ZS h f t Z 11 22 33 44 55 66 77 88 99 00 . (period) Orange DEL . (period O range K <B l u e G [B l u e Y ]B l u e Z >B l .
12 - 5 " Orange G ! Orange Q !S h f t 1 @ Orange W @S h f t 2 # Orange E #S h f t 3 $ Orange R $S h f t 4 €B l u e R % Orange T %S h f t 5 ^ Orange Y ^S h f t 6 & Orange U &S h f t 7 ( .
12 - 6 55 Ke y 5250 Alphanumeric K eyMap - Primary Delete . • The following keymap is used on an MX7 Tecton that is running a 5250 Terminal Emulator. • When using a sequence of keys that includes a sticky key, press the sticky key first, release it, then press the rest of the key sequence.
12 - 7 Space Spc Enter Enter Scan Scan CapsLock (Toggle) Blue Tab Back Space Orang e Spc Tab Tab Back Tab O range Tab Up Arrow Up Arrow Down Arrow Down Arrow Right Arrow Right Arrow Left Arrow Left Ar.
12 - 8 F24 Shft Orange F4 aA bB cC dD eE fF gG hH iI jJ kK lL mM nN oO pP qQ rR sS tT uU vV wW xX yY zZ AS h f t A BS h f t B CS h f t C DS h f t D ES h f t E FS h f t F GS h f t G HS h f t H IS h f t.
12 - 9 OS h f t O PS h f t P QS h f t Q RS h f t R SS h f t S TS h f t T US h f t U VS h f t V WS h f t W XS h f t X YS h f t Y ZS h f t Z 11 22 33 44 55 66 77 88 99 00 .
12 - 10 , (comma) Orange J ' (apostrophe) Orange H ~ (tilde) Orange B O r a n g e S |O r a n g e A "O r a n g e G !O r a n g e Q !S h f t 1 @O r a n g e W @S h f t 2 #O r a n g e E #S h f t .
12 - 11 55 key Alphan umeric Ke ymap - Primar y Bac kspace . Note: This keypad features a dedicate d backspace key. • The following keymap is used on an MX7 Tecton that is NOT running a Terminal Emulator.
12 - 12 Insert Orange Ctl Delete Orange Spc Home Shft Down Arrow End Shft Up Arrow Page Up Orange Up Arrow Page Down Orange Down Arrow F1 F1 F2 F2 F3 F3 F4 F4 F5 F5 F6 Orange F1 F7 Orange F2 F8 Orange.
12 - 13 lL mM nN oO pP qQ rR sS tT uU vV wW xX yY zZ AS h f t A BS h f t B CS h f t C DS h f t D ES h f t E FS h f t F GS h f t G HS h f t H IS h f t I JS h f t J KS h f t K LS h f t L MS h f t M NS h.
12 - 14 11 22 33 44 55 66 77 88 99 00 . (period) Orange Bksp . (period Orange K <B l u e G [B l u e Y ]B l u e Z >B l u e H =B l u e T {B l u e W }B l u e X /B l u e J -B l u e S p c + Blue Bksp.
12 - 15 $ Orange R $S h f t 4 €B l u e R % Orange T %S h f t 5 ^ Orange Y ^S h f t 6 & Orange U &S h f t 7 ( Orange O (S h f t 9 ) Orange P ) Shft 0 (zero) T o get this Key / Function Press .
12 - 16 32 key Numeric-Alpha K eymap . • The following keymap is used on an MX7 Tecton that is NOT running a Terminal Emulator. Terminal emulators use a separate keymap. • When using a sequence of keys that require an alpha key, first press the Alph key.
12 - 17 Back Space Orange Spc Tab Tab Back Tab Orange Tab Up Arrow Up Arrow Down Arrow Down Arrow Right Arrow Blue Up Arrow Left Arrow Blue Down Arrow Insert Orange Ctrl Delete Del Home Shft Down Arro.
12 - 18 e Alpha 33 f Alpha 333 g Alpha 4 h Alpha 44 i Alpha 444 j Alpha 5 k Alpha 55 l Alpha 555 m Alpha 6 n Alpha 66 o Alpha 666 p Alpha 7 q Alpha 77 r Alpha 777 s Alpha 7777 t Alpha 8 u Alpha 88 v A.
12 - 19 TS h f t A l p h a 8 U Shft Alpha 88 V Shft Alpha 888 WS h f t A l p h a 9 X Shft Alpha 99 Y Shft Alpha 999 Z Shft Alpha 9999 11 22 33 44 55 66 77 88 99 00 .
12 - 20 | Orang e Alt "B l u e A l p h ! Orange Diamond#3 !S h f t 1 @ Orange 5 @S h f t 2 # Orange 4 #S h f t 3 $ Orange 9 $S h f t 4 %S h f t 5 ^B l u e C t r l ^S h f t 6 &S h f t 7 ( Blue.
13 - 1 13 Battery Charger Unpacking y our Battery Charger After you open the shipping ca r ton containing the product, take the f o llo wing steps: • Check for damage during shipment. Report damage immediate ly to the carrier who delivered the carton.
13 - 2 Cautions and W arnings Battery Charger • There is a risk of explosion if the MX 7 Tecton Li-Ion battery in the charging pock e t is replaced by an incorrect type. Other batteries or battery packs may burst causing injur y or property damage. • Do not insert any other type of Li-Ion battery in the battery charging pocket.
13 - 3 To p V i e w 1. Battery Charging Pocket 2. Retaining Clip 3. Battery Charging Contacts.
13 - 4 Installation Assemble the P ower Suppl y Assemble the A C adapter for the MX7 T ecton Batt er y Charger before connecting it to the charger . The AC pow er supply for the batter y ch arger is shipped with the battery charger . Contact Technical Assistance (page 16-1) if there is no AC cable .
13 - 5 Mounting The batter y charger should be located in an area where it: • Is well ventilated. • Is not in high traffic areas. • Locates or orients the AC cord so that it will not be stepped on, tripped over or subje cted to damage or stress.
13 - 6 Charging Batteries New batteries should be ch arged fully before first use . The life and capacity of a Lithi um Ion batter y pac k can vary significan tly depending on the discharge current and the environment in which it is used . When a bat ter y is plac ed in a chargin g pock et, the battery char ger begins chargin g the batter y .
13 - 7 NO LIGHT - on any c harge poc ket No light on a charge pock et means there is no batter y pack installed, • or the battery pack in the pocket is not fully inserted, • or a defective or d amaged battery pack is installed, • or the charger is defective or damaged.
13 - 8 Charger Cleaning, Storage and Service Cleaning Unplug the charger from the power source bef ore cleaning or removing debris from charging pockets . Use only mild detergent with a slightly damp cloth to clean the outside of the charger . Do not use solvents or flammable cleaners.
13 - 9 Battery Cleaning, Storage and Service Cleaning The batter y pack should not require cleanin g unless it has become heavily soiled. Old or damaged batter ies should be dis- posed of promptly and properly . The best wa y to dispose of us ed batteries is to recycle them .
13 - 10.
14 - 1 14 Cradles Unpacking y our Cradles After you open the shipping ca r ton containing the product, take the f o llo wing steps: • Check for damage during shipment. Report damage immedia tely to the carrier who delivered the carton. • Make sure the items in the carton match your order.
14 - 2 T ethered Scanners and the MX7 T ecton Cradles An MX7 T ecton powered cradle supports tethered scanner at tachment. A pow ered cradle provides 5V pow e r to a tethered scanner . The passiv e vehicle cradle cannot suppor t tethered scanner attachment.
14 - 3 Using a Desktop Cradle Introduction Note: When an extern al power supply is used to power this cradle, the exte rnal power supply sh ould be UL Listed, with LPS or Class 2 outpu ts rated 12V, minimum 2 am ps. The desktop cradle is availab le in three configurations: 1.
14 - 4 Fr ont View 1. Charging Pocket Adapter Cup 2. MX7 Tecton Docked LED 3. Serial Interface Connector 4. Spare Battery LED 5. I/O Connector 6. Table Mounting Hole Guides.
14 - 5 Back View 1. Charging Pocket Adapter Cup 2. Cradle Connector 3. Spare Battery Charging Bay 4. Power Connector.
14 - 6 T op View Desktop Mounting Footprint 1. Front 2. Table Mounting Hole Guides 3. Back Bolts, w ashers, scre ws, scre wdriver or wrench needed when attaching the MX7 T ecton desktop cradle to a protected flat surface are not supplied by Honeywell.
14 - 7 Installing and Removing the Doc king Bay Adapter Cup Equipment Required -- Phillip s scre wdriver and torquing tool (not supplied by Honeywell). Y ou will need a torquing tool capable of torquing up to 6 (+/- .5) in/lb . Install/remove t he doc king bay adapter cup using a clean, well-lit stable surface .
14 - 8 Assemble/Attach the A C P ower Adapter Note: Connect the cable to the cradl e first, then to an AC source. The external P ower Supply for the cradle is shipped with the cradle. Contact Technical Assistance (page 16-1) if there i s no A C cable .
14 - 9 Connecting Input/Out put Cables to the Desktop Cradle Note: Route all cables to ensure they are protected from jostli ng, tugging or being disconnected by passin g objects. The cradle must be re ceiving power from an e xter nal power source before MX7 T ecton batter y charging can begin.
14 - 10 Spare Batter y LED Note: The cradle must be con nected to AC power before th e LEDs illuminat e. Spare batt ery charging does not require an MX7 Tecton be docked in the docking bay. MX7 T ecton System Status LED Status when Docke d The MX7 T ecton System Status LED is located abov e the Scan button.
14 - 11 Inserting / Removing a Spare Ba ttery from the Desktop Cradle Prerequisites: The ste ps outlined in Assemble/Attach the AC Power Adapter (page 14-8) hav e been completed and the cradle has a dep endable po wer source. The cradle has been bolted to a stable surf ace, if de sired.
14 - 12 Desktop Cradle Help The f ollowing is intended as an aid in deter mining whether the MX7 T ecton batter y pack or the cr adle batter y charger may be malfunctioning. Prob lem Cause Solution Batter y pack does not fit in batter y well. Diff erent manuf acturer's batter y pack, or there is an object in the batter y well.
14 - 13 MX7 T ecton docked in cradle but Doc ked LED does not light up. MX7 T ecton not fully dock ed. P ower supply not connected. Check the doc king bay is clear of f oreign obj ects and reseat the MX7 T ecton fully into the docking bay . Check that pow e r is applied to the P ower J ack at the rear of the MX7 T ecton Desktop Cradle.
14 - 14 Using a P assive V ehicle Cradle Introduction Note: The protective boot or carryin g case (if used) must be removed before inserting the MX7 Tecton into a se curely mounted passive ve hicle cradle.
14 - 15 Components U-Bracket Fo otprint The image below is not to scale. RAM Assembl y Components Mount the cradle U -brac ket to the upper RAM ball assembly with the bolts, washers and nuts supplied by Honeyw ell.
14 - 16 RAM Assembl y Footpri nt Installing the Cradle U-Bracket Note: Honeywell does not supply th e bolts or washers needed when mounting th e cradle assembly to the vehicle chassis. Use bolts with a maximum 10 /32” (0 .3125) diameter. 1. Attach the U-Bracket to the vehicle, making sure it does not impede safe operation of the vehicle.
14 - 17 Installing the RAM Bracket 1. Attach the lower RAM ball assemb ly to the vehicle, maki ng sure it does not impede sa fe o peration of the vehicle. 2. Fasten the upper RAM ball assembly to the base of the U-bracket using the suppl ied bolts, washers and screws.
14 - 18 Using a P owered V ehic le Cradle Introduction The MX7 T ecton vehicle mount cradle uses one of the following po wer supply options: • A power cable for 12V vehicles • DC/DC power supply for non-12V vehi cles • AC/DC power supp ly with US power cord • AC/DC power supply, requires count ry sp ecific C14 type power cord.
14 - 19 Components Bef ore installation b egins, v er ify you ha ve the applicable v ehicle mounting bracket assemb ly components necessar y for your mount type. Fr ont View 1. Retainer 2. Retainer Springs 3. Handle Openin g 4. Vehicle Crad le Adapter Cup 5.
14 - 20 Back View 1. Retainer 2. Retainer Springs 3. Handle Opening 4. RAM Bracket Mounting Locations 5. Strain Relief Cable Cla mps 6. Serial Interface Port 7.
14 - 21 Installing or Removing V ehic l e Cr adle Adapter Cup and T op Adapter Equipment Required -- Phillip s scre wdriver and torquing tool (not supplied by Honeywell). Y ou will need a torquing tool capable of torquing up to 6 in/lb (+/- .5 in/lb) f or the cradle adapter cup.
14 - 22 Installing the Adapter Charging P oc ket Adapter Cup The adapter cup is installed facing in one direction. 1. Slip the adapter cup into the cradle charging pocket, ali gning th e screw hole in the adapter cup with the screw hole in the charging bay.
14 - 23 1. Lay the flat side of the Retainer Insert against the underside of the Retainer cap, show below. 2. Slide the Retainer Insert back tab into the slot at the back of the Retainer. 3. Fasten the Retainer Insert to the Retainer cap using screws and the pre-dri lled holes in the angled tabs (one on each side).
14 - 24 RAM Bracket Mounting RAM Brack et Assembly mounting holes are on the back of the cradle. The mounting scre ws fit in Pim nuts and are automatically secured. The number of RAM balls attached to the back of the ve hicle mount cradle are dependent upon the desired RAM mount configuration.
14 - 25 V ehicle Cradle RAM Ball Assemb ly 1. Fasten the RAM ball with the circular mounting base (s hown in the middle in above image) to the vehicle. 2. Fasten the RAM ball with the rectangula r mounting base (shown on the ri ght in above image) to the back of the vehicle cradle.
14 - 26 DC/DC P ower Supply Installati on, Scre ws on T op of lid F or use with Honeywell pow er supplies • 9000301PWRSPLY – Power Supply, 18-60VDC with cabl e • 9000302PWRSPLY – Power Supply,.
14 - 27 Wiring Schematic Connecting V ehic le Electrical Supply 1. The vehicle cradle must be empty. 2. Begin by connecting the po wer cable to the vehicle cradle. Work from this connecti on with the last connection being to the vehicle’s power source.
14 - 28 9. Wire colors depend on the type of device attache d. Please refer to the Wiring Schematic for wire colors. 10. Use the looms and wire ties to secure all wiring as shown above, th en reattach the lid. 11. Connect the DC to DC power supply to the vehi cle’s electrical system as directed below:.
14 - 29 DC/DC P ower Supply Installation, Scre ws on Side of Lid F or use with • 9000311PWRSPLY – Power Supply, 9-60VDC, 60W • 9000313PWRSPLY – Power Supply, 50-150VDC , 60W: If your DC/DC pow e r supply does not look like the image abov e, see DC/DC Power Supply Installation, Screws on Top of lid (page 14-26) for installation instr uction.
14 - 30 Wiring Schematic Connecting to V ehic le P ower The vehicle cradle must be empty . The last connection must be to the vehicle power source. 1. Connect the power cable to the vehicle cradle. 2. Route the cable from the cradle to the DC/DC po wer supply .
14 - 31 8. Route the wiring from the DC/DC power supply to t he vehicle’s electrical system. Do not connect to vehicle power at this time. 9. Strip the wi re ends and connect to the input side of the DC/DC po wer supply. 10. Use looms and wire ties to secure all wiring as shown.
14 - 32 V ehic le 12V Bare Wire Adapter P ar t Number: 9000 A079CBL12ML3 V ehicle Cab le Connection Cable (Fuse Not Shown) Connecting the P ower Cab le to the V ehic le Note: Correct electrical polarity is required for safe and pr oper installation. The crad le will not power on or function if the cable is connected with the polarity reversed.
14 - 33 6. Use proper electrical and mechanical fastening means for terminating the cabl e. Properly sized “crimp” type electrical terminals are an acce pted method of termination. Select electrical connectors si zed for use with 1 8AWG (1mm2) conductors.
14 - 34 V ehicle Cradle Strain Rel ief Cable Clamps Equipment Required: Phi llips screwdriv er (not supplied by Hone ywell). There are three strain relief cable clamps secured to the back of the v ehicle cradle, located abov e the por ts f or the Serial Interface , P ower and MX7 I/O connections.
14 - 35 Dock ing the MX7 T ecton in a P owered V ehic le Cradle Note: Do not put the MX7 Tecton into the vehi cle cradle until th e cradle is securely fastened to the vehicle. Always put the handle through the Handle Ope ning first or damage to the scanner aperture may occur.
14 - 36 Removing the MX7 T ecton from a P owered V ehic le Cradle 1. Push the top of the Retainer up and back un til the MX7 Tect on is released from the Retainer la tches and the charging pocket swings forward.
15 - 1 15 T echnical Specifications MX7 T ecton Har dware MX7 T ecton Dimensions and W eight Processor Marvell PXA-320 CPU operating at 806 MHz. Turbo mode switching is supp orted.
15 - 2 MX7 T ecton En vir onmental Specifications MX7 T ecton Netw ork Card Specifications Summit 802.11 a/b/g SDIO 2.4/5.0GHz Bluetoot h MX7 T ecton A C/DC W all Adapter Operating Temp erature 14°F .
15 - 3 Desktop Cradle Serial P or t The connector is industr y-standard RS232 and is a PC/A T standard 9-pin D male connecto r . Note: Tethered scanners must be connected to powered cradl es. Note: Pin 9 of this port is connected to +5 VDC and onl y approved Honeywe ll cables are to be used for communication between the cradle and external devices.
15 - 4 V ehic le Mounted Cradle Serial P or t The connector is industr y-standard RS232 and is a PC/A T standard 9-pin D male connecto r . Note: Tethered scanners must be connected to powered cradl es.
15 - 5 P ower Connector P or t Note: When an external power supply i s used to power these products, the external pow er supply should be UL Listed, with LPS or Class 2 outputs rated 12 V, minimum 2 Amps. The P ower connector is located on the back of the v ehicle cradle.
15 - 6.
16 - 1 16 Customer Suppor t T ec hnical Assistance If you need assistance installin g or troubleshooting your de vice, please contact us b y using one of the methods below: Knowledge Base: www.hsmknowledgebase.com Our Knowledge Base provides thousands of immediate solutions.
16 - 2 All provisions of this Limited W arranty are separate and se v era ble, which means that if any pro v ision is held inv alid and une n- f orceable, such deter mination shall not aff ect the validity of enforceability of the other provisions hereof.
Back Cvr - 1.
™ Honeywell Scanning & Mobility 9680 Old Bailes Road Fort Mill, SC 29707 www.honeywellaidc.com TECTON-WM-UG Rev A 8/14.
An important point after buying a device Honeywell MX7 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Honeywell MX7 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Honeywell MX7 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Honeywell MX7 you will learn all the available features of the product, as well as information on its operation. The information that you get Honeywell MX7 will certainly help you make a decision on the purchase.
If you already are a holder of Honeywell MX7, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Honeywell MX7.
However, one of the most important roles played by the user manual is to help in solving problems with Honeywell MX7. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Honeywell MX7 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
