Instruction/ maintenance manual of the product HS-120 Series Honeywell
Go to page of 21
OWNER’S MANUAL 12" ( 30 CM ) TURBO TM 4 WA Y FAN 12" ( 30 CM ) TECH TM 4 WA Y FAN Model HS-120 Series Model HS-120C Series.
INSTRUCTIONS F0R USE AND CARE READ AND SA VE THESE IMPORT ANT SAFETY INSTRUCTIONS BEFORE USING THIS FAN. When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1.
ST AND FAN ASSEMBL Y INSTRUCTIONS • Insert the long Metal Pole into the Base and tighten it by turning either the Pole or the Base (Fig. 1). • Insert and tighten the short Metal Pole into the Base/Pole Assembly (Fig.1). • Place the Motor Assembly into the shorter Fig.
GRILLE ASSEMBL Y INSTRUCTIONS • Remove the Rear Grille Mounting Nut from the Motor . Place the Rear Grille onto the Motor Housing, making sure the three holes of the Rear Grille fit over the three matching prongs on the Motor Housing. T ighten the Rear Grille Mounting Nut CLOCKWISE (Fig.
OPERA TION • Place your fan on a level and dry surface. • Plug the power cord into a 120 volt wall outlet. • T o operate the Child Resistant switch, push in and turn the Speed Control Knob (Fig. 8). • T o stop the oscillating feature, pull up hard on the Oscillation Control Knob.
CONSUMER RELA TIONS/REPLACEMENT PARTS T o speak with a customer service representative or place an order please call our consumer relations center , toll free at 1-800-332-1110. Orders may be placed 24 hours a day, seven days a week with Master Card, Visa or Discover .
5 YEAR LIMITED WARRANTY ©1999 All rights reserved. Honeywell Inc. F1028.99 P/N 035-00372-000 Rev 1 artwork # 043-50099-000 Y ou should first read all instructions before attempting to use this product. The enclosed Customer Response card should be filled out and returned within 7 days of purchase.
GUIDE D ’ UTILISA TION VENTILA TEUR TECH MD VENTILA TEUR TURBO MD 4 POSITIONS DE 12 PO ( 30 CM ) Série de modèles HS-120 Série de modèles HS-120C.
LIRE CES IMPORT ANTES INSTRUCTIONS A VANT D’UTILISER LE VENTILA TEUR. CONSERVER CES INSTRUCTIONS POUR LES CONSUL TER AU BESOIN. L ’utilisation d’appareils électriques nécessite des précautions élémentaires afin de diminuer les risques d’incendie, de choc électrique ou de blessure.
INSTRUCTIONS D ’ ASSEMBLAGE DU VENTILA TEUR SUR PIED • Ins é rer le long poteau de m é tal dans la base et serrer en tournant le poteau ou la base (Fig.
INSTRUCTIONS D ’ ASSEMBLAGE DES GRILLES • Enlever l ’é crou de montage de la grille arri è re du bo î tier du moteur . Placer la grille arri è re sur le bo î tier du moteur en s ’ assurant d ’ ins é rer les trois points soulev é s situ é s sur le bo î tier du moteur dans les trois trous de la grille arri è re.
FONCTIONNEMENT • Placer le ventilateur sur une surface s è che et bien horizontale. • Brancher le cordon d ’ alimentation dans une prise de courant murale de 120 volts. • Pour actionner le commutateur à l ’é preuve des enfants, pousser et tourner le bouton de contr ô le de vitesse (Fig.
SERVICE À LA CLIENT È LE / PI È CES DE RECHANGE Pour parler à un repr é sentant du service technique ou pour donner une commande, pri è re de communiquer avec notre Centre du Service à la client è le, en composant sans frais le 1-800-332-1110.
©1999 All rights reserved. Honeywell Inc. F1028.99 P/N 035-00372-000 Rev 1 artwork # 043-50099-000 GARANTIE LIMIT É E DE 5 ANS Pri è re de lire toutes les instructions avant de tenter d'utiliser ce produit. La carte ci-jointe doit ê tre remplie et retourn é e dans les 7 jours suivant l'achat.
MANUAL DEL PROPIET ARIO VENTILADOR DE 12" ( 30 CM ) DE 4 USOS TECH MR VENTILADOR DE 12" ( 30 CM ) DE 4 USOS TURBO MR Modelo Serie HS-120 Modelo Serie HS-120C.
ANTES DE USAR SU VENTILADOR LEA Y GUARDE EST AS INSTRUCCIONES IMPORT ANTES. Siempre que utilice artefactos el é ctricos, debe seguir precauciones b á sicas de seguridad para reducir el riesgo de incendio, choques el é ctricos, quemaduras y otras lesiones, incluyendo las siguientes: 1.
INSTRUCCIONES DE ENSAMBLAJE PARA EL VENTILADOR DE PISO • Inserte el poste met á lico largo en la base y apri é telo ya sea dando vuelta a la base o al poste mismo. (Figura 1) • Inserte y apriete el poste met á lico corto en la ensambladura del poste y la base.
INSTRUCCIONES DE ENSAMBLAJE DE LA REJILLA • Quite del motor la tuerca de montaje de la rejilla posterior . Coloque la rejilla posterior encima del recinto del motor , cercior á ndose que los 3 agujeros de la rejilla posterior ajustan sobre las 3 protuberancias en el recinto del motor .
FUNCIONAMIENTO • Coloque su ventilador sobre una superficie plana y seca. • Enchufe el cord ó n de alimentaci ó n en un tomacorriente de pared de 120 V olts. • Si desea activar el interruptor de protecci ó n para ni ñ os, oprima el bot ó n de control de seguridad y dele vuelta hasta la posici ó n deseada.
RELACIONES CON LOS CLIENTES/ PARTES DE REEMPLAZO Si desea hablar con un representante de servicio a los clientes o para ordenar alg ú n producto, s í rvase llamar a nuestro Centro de Relaciones con los Clientes, sin costo, al tel é fono 1-800-332-1110.
©1999 All rights reserved. Honeywell Inc. F1028.99 P/N 035-00372-000 Rev 1 artwork # 043-50099-000 GARANT Í A LIMIT ADA POR 5 A Ñ OS Antes de intentar usar ese producto debiera usted leer todas las instrucciones.
An important point after buying a device Honeywell HS-120 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Honeywell HS-120 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Honeywell HS-120 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Honeywell HS-120 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Honeywell HS-120 Series will certainly help you make a decision on the purchase.
If you already are a holder of Honeywell HS-120 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Honeywell HS-120 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Honeywell HS-120 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Honeywell HS-120 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
