Instruction/ maintenance manual of the product HD3MDIP Honeywell
Go to page of 80
Document 800-04132V1 – Rev A – 01/10 User Guide EQUIP™ Series Indoor Fixed Mini Dome Network Camera NTSC / PAL HD3MDIP HD3MDIPX.
Revisions Issue Date Revisions A 09/09 New document for HD3MDIP/X release. Generally describes the functional ity in the firmware of the HD3M DIP/X camera .
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 – Rev A – 01/10 3 Contents Figures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Tables . . . . . . . . . . . . . . . . . . . . .
4 Contents Step 5: Launch the Web-Client to View Live Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Uninstalling IP Utility, Bonjour o r the ActiveX Plug-in Software . . . . . . . . . . . . . . . . . . . . . .4 0 Uninstalling IP Utility Using the Start Menu .
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 – Rev A – 01/10 5 Figures Figure 2-1 H D3MDIP/X Camera Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Figure 2-2 M ounting Template . . . . . . . . . . . . .
6 Figures.
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 – Rev A – 01/10 7 Tables Table 1-1 Fixed Mini Dome Network Camera Model Numbers . . . . . . . . . . . . . . . . . . . . . . 13 Table 2-1 Audio and Alarm Connector PIN Definitions . . .
8 Tables.
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 Rev A 9 01/10 About This Document This document introduces the Honeywell HD3MDIP/X True Day/Night Indoor Network Camera. It covers how to install and oper ate the HD3MDIP/X in a network environment.
10 Cautions and Warnings Installation and servicing should be performed only by qualified and experienced technicians to conform to all local codes and to maintain your warranty. WARNING! 24 VAC models re quire the use of CSA Certified/ UL Listed Class 2 power adapters to ensure c ompliance with electrical safety standards.
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 Rev A 11 01/10 If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of f and on, the user is encouraged to try to correct the interference.
12 Prior authorization must be obtained for all returns, exchanges, or credits. Items shipped to Honeywell withou t a clearly identi fied Return M erchandise Authorization ( RMA) number may be refuse d.
Document 800-04132V1 Rev A 13 01/10 1 Introduction Honeywell HD3MDIP/X color network cameras pr ovide high picture quality remote video surveillance over a network connection.
14 Introduction.
Document 800-04132V1 Rev A 15 01/10 2 Installation and Setup This chapter describes how to: •M o u n t t h e c a m e r a • Adjust the camera for the clearest image • Set up the camera in a network system Before You Begin Before installing the camera, Hon eywell recommends that you check www.
16 Installation and Setup If any parts are missing or damaged, contac t the dealer from which you purchased you r camera or call Honeywe ll Customer Service (see Warranty and Service ).
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 Rev A 17 01/10 Camera Components and Functions The HD3MDIP/X Network Camera con sists of a fully-integrated enclosure with camera and lens. The wiring can be completely concealed to reduce the risk of tampering.
18 Installation and Setup Camera Installation Preparing the Camera 1. Rotate the bubble counterclockwise until it disconnects. 2. Pull the turret to remove it. 3. Rotate the camera counterclockwise until it disconnects from the skirt. 4. Set aside the bubble, turret, and camera.
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 Rev A 19 01/10 2. Pre-drill the holes as indicated on the template, using the recommended hole size for the screws being used. Note Other fasteners (preferably stainless stee l) can be used, provided they are not larger than the screw holes on the mounting template.
20 Installation and Setup the client (PC) and provide an industry standard lin e level output suitable to connect to audio devices. Audio input and output have 600 Ohm impedance. See Audio Settings on page 63 to configure audio options. Connecting Alarms WARNING! Do not exce ed the maximum rati ng of 12 VDC, 0.
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 Rev A 21 01/10 Connecting Power WARNING! The use of a CSA Certified/UL Listed Class 2 power supply is required to en sure compliance wi th electrical sa fety standards. Note Check the power source from the external power supply before applying power to the ca mera.
22 Installation and Setup Figure 2-6 Camera and Cables Figure 2-7 Wiring Conn ec tion Shown on Board 24 VAC powe r RJ45 Ethernet network connection (using 10Base T or 100Base TX cable). See Connecting to a Network via an RJ-45 Ethernet Connector , page 23 ) Also for Power over Ethernet (PoE 802.
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 Rev A 23 01/10 Caution Installation must be performed by a qualified electrician. The power wire size for the distance and the number of cameras must be determined to maintain 24 VAC at each camera.
24 Installation and Setup Mounting the Camera Surface Mount 1. Secure the skirt to the ceiling or wall us ing the appropriate screws (s upplied). 2. Connect the wires (see Connecting the Wires on page 19 ). 3. Rotate and align the camera a ssembly yellow label with the skirt yellow label.
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 Rev A 25 01/10 Flush Mount (with or without 4S box) 1. Use the screws (supplied) to connect the adapter plate directly to the ceiling or wall. Or Use your own screws to connect the adapter plate to the 4S box (not supplied) which is attached to the ceiling or wall.
26 Installation and Setup 3. Adjust the gimbal assembly to the desired view. 4. Re-tighten the locking screw to lock the gimbal assembly in place. Note Orient the camera as shown in Figure 2-8 to maintain the correct picture orient ation . Figure 2-8 Gimbal Adjustment Adjusting the Lens Focus Lenses are pre-focused at th e factory.
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 Rev A 27 01/10 Securing the Enclosure Cover Install the bubble when you have set up your camera and completed the network connections (see Chapter 3, Installing the Hon eywell IP Utility and HD 3MDIP/X Web-Client Software ).
28 Installation and Setup.
Document 800-04132V1 Rev A 29 01/10 3 Installing the Honeywell IP Utility and HD3MDIP/X Web-Client Software This chapter describes how to: • Install and log onto the IP Utility • Connect to a devi.
30 Installing the H oneywell IP Util ity and HD3MDIP /X Web-Client Software About the Web-Client The Web-Client is the web-based application that enables users to: • View live-streaming video. • View the device network settings and firmware det ails.
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 Rev A 31 01/10 Step 1: Confirm Your System Requirements Note Windows administrator privileges are required to in stall the Honeywell IP Utility and associated software.
32 Installing the H oneywell IP Util ity and HD3MDIP /X Web-Client Software Step 2: Install the Honeywell IP Utility Software 1. Close all other applications that might be open on your computer. 2. Open the Honeywell IP Utility InstallShield Wizard . Method 1: CD Insert the CD into the CD-ROM drive.
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 Rev A 33 01/10 Step 3: Log Onto the IP Utilit y and Discover Network Devices 1. Double-click the Honeywell IP Ut ility icon on your desktop. -OR- Click Start ➤ Programs ➤ Honeywell Video Syste ms ➤ EQUIP Series ➤ IP Utility ➤ Honeywell IP Utility .
34 Installing the H oneywell IP Util ity and HD3MDIP /X Web-Client Software Figure 3-3 Honeywell IP U tility User Inte rface Step 4: Connect to a Device and Configure Network Settings When you log on .
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 Rev A 35 01/10 You can also manually refresh the devi ce discovery by clicking the Discovery icon ( ), located near the top of the Discovery pane. Connecting to or Disc onnecting From Devices Before configuring the IP network settings, you must connect to t he IP device.
36 Installing the H oneywell IP Util ity and HD3MDIP /X Web-Client Software Figure 3-4 Set the IP Network Settings Automati cally or Manually Table 3-4 IP Network Device Setting Options Option Description Device Name By default, the device name is the device type plus the MAC Address.
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 Rev A 37 01/10 Updating IP Network Se ttings Automatically 1. In the Discovery pane, select the device and click Connect . 2. From the System tab clic k the Obtain an IP Address automatica lly check box.
38 Installing the H oneywell IP Util ity and HD3MDIP /X Web-Client Software Interfacing with the EQUIP Devi ce Via a Network Video Recorder Your recording vendor has the option of using either the connection methods supported by EQUIP V1 firmwar e or EQUIP V2.
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 Rev A 39 01/10 2. Select a User Name and enter a Password . a. From the User Name drop-down list, select Administrator or Guest . b. In the Password field, enter the case-sensitive password.
40 Installing the H oneywell IP Util ity and HD3MDIP /X Web-Client Software Figure 3-6 Web-Client Inter face After Logg ing On Uninstalling IP Utility, Bonjou r or the ActiveX Plug-in Software You can.
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 Rev A 41 01/10 Uninstalling IP Utilit y Using the Start Menu 1. Click Start ➤ All Programs ➤ Honeywell Video Systems ➤ EQUIP Series ➤ IP Utility ➤ Uninstall Honeywell IP Utility .
42 Installing the H oneywell IP Util ity and HD3MDIP /X Web-Client Software.
Document 800-04132V1 Rev A 43 01/10 4 IP Camera Web-Client Before you launch the Honeywell IP Web-Client, ensure tha t you complete the following sections before configuring your HD3MDIP/X camera: •.
44 IP Camera Web-Client User Profiles Table 4-1 describes the roles and privileges fo r the HD3MDIP/X Web-Client application users: Logging On and Off the HD3MDIP/X IP Web-Client Note One Administrator and on e Guest can log on to the Web-Client application at a time.
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 Rev A 45 01/10 Launching the Web-Client from IP Utility 1. From the desktop, double-click the Honeywell IP Utility i con . -OR- Click Start ➤ All Programs ➤ Honeywell Video Systems ➤ EQUIP Series ➤ IP Utility ➤ Honeywell IP Utilit y .
46 IP Camera Web-Client Logging Onto the Web-Client from Internet Explorer 1. From Internet Explorer (v6.0+), enter the URL (IP address of the device) in the Address bar to open the logon window. The Web-Client log on page opens. 2. Select a User Name and enter a Password .
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 Rev A 47 01/10 Note Do not use the CLOSE button ( )in Internet Explorer to logout or the session might not end correctly, and sett ings that have you changed might not be saved.
48 IP Camera Web-Client The HD3MDIP/X Web-Client application u ser int erface consists of multiple user-friendly views organized by function. Access to the vi ews is user-controlled. Figure 4-3 Web-Client: Adm inistrator User Table 4-2 Tabs/Views in th e Web-Client Application Tab Enables you to.
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 Rev A 49 01/10 Figure 4-4 Web-Client: Gue st User Live View Live View shows live video fr om the selected camera (see Figu re 4-4 ). Device Settings The Device Settings tab allows you to view the network settings and firmware details of the camera.
50 IP Camera Web-Client IP and Firmware Settings on the Device Information Tab Depending on the hardware installation, there is a tab called either Device Information or Device Sett ings . In both cases, the IP and Firmware Settings panel mirrors the information available in the Honeywell IP Utility.
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 Rev A 51 01/10 Figure 4-6 IP and Firmware Settings: Device In formation Tab Compression Settings The video signal sent from the camera to the Web-Client has a number of set tings that can be edited which affect how the video displays in the Web-Client.
52 IP Camera Web-Client Figure 4-7 Compressions Sett ings Tab: Primary Stream Your HD3MDIP/X camera provides dual simu ltaneous video streams. Although the Primary stream can support a single MPEG4 SP in real ti me 30 fps at 720p reso lution, it must be set to less than 720P for the second stream to operate.
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 Rev A 53 01/10 Configuring the Compression Settings 1. On the Compression Settings tab, in the Statistics area, select the Received check box to receive in real time the bit rate and frame rates for the current image.
54 IP Camera Web-Client Figure 4-9 Video Codec Setting s, Quality Priority Selected 3. Click Apply . Adjustments in your compression set tings are captured in the statistics. As you make adjustments, the Statistics fiel d acts as a visual reminder of how your settings affect the bit rate, frame rate, and bandwidth usage.
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 Rev A 55 01/10 Camera Setup The Camera Setup view provides access to the settings used to configure the camera configurations for both Primary and Secondary streams. The f ollowing section explains Auto Exposure and White Balance setup.
56 IP Camera Web-Client Note You must click Apply after you make changes to any settings to save those changes. Settings are not saved unless you click Apply . Table 4-4 Auto Exposure Settings Setting Options Description ALC (Automatic Light Compensa tion) DC Iris Level: 1 – 25 For an autom atic ir is lens.
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 Rev A 57 01/10 White Balance White Balance ensures that color integrit y is maintained in the camera image by compensating for the temperature color “casts” that different light sources can cause.
58 IP Camera Web-Client Figure 4-11 Video Analytics Tab Each setting has three threshold levels: high (80%), medium (50%) and low (30%). When these thresholds are exceeded, camera sabo tage or motion is detected, and alarm messages appear above the video displa y and alarm signals are sent to DVRs /NVRs (see Figure 4-13 ).
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 Rev A 59 01/10 There are three types of sabotage detection in the Tamper Detectio n Setting tab on the Video Analytics tab: blinding the ca mera, blurri ng the video display, and tampering with the camera field of view.
60 IP Camera Web-Client Configuring Camera Blinding Detection An obstacle in front of the camera lens can blind the camera. When this occurs, camera blinding is detected and an alarm message appears above the video display (see Figure 4-13 ). To detect camera blinding: 1.
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 Rev A 61 01/10 2. In the Scene Change Threshol d list, select one of the following options: 3. Click Apply . Note To turn off camera field of view change detection, select Disable in the Scene Change Threshold li st.
62 IP Camera Web-Client Figure 4-14 Video Analytics: Defi ning a Regi on Note To disable a zone, click the VMD drop-down menu, then select Disable . Alarm and Audio Alarm Settings Connect external devices such as sirens or flashing lights to the alarm output connector to signal users of the camera that an alarm is activated.
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 Rev A 63 01/10 Audio Settings The network camera supports bi-directional audio. There are two supported voice band channels that function in full duplex mode. Connect industry-standard line level a udio input and output to the back of your camera.
64 IP Camera Web-Client.
Document 800-04132V1 Rev A 65 01/10 A Mounting Template HD3DIP/X Mounting Template Apply to clea n, dry surf ace, free of dust and dirt 6 Holes Use recommended drill bit as per screws (supplied).
66 Mounting Template.
Document 800-04132V1 Rev A 67 01/10 B Troubleshooting Technical Support Prior to calling Honeywell technical support, refer to the following topics for possible solutions to problems with your HD3MDIP/ X camera.
68 Troubleshooting Problem: Live View Does No t Display the Expected Video Possible solutions: • Ensure that your web browser settings have been configured to allow ActiveX controls (see Installing the Honeywell IP Utility and HD3MD IP/X Web-Client S oftware on page 29 for information on setting up your browser).
Document 800-04132V1 Rev A 69 01/10 C Specifications Note These specifications refer to all models, except where otherwise noted. Specifications are subject to cha nge without notice. Video Signal Specifications NTSC PAL Scanning System: Progressive Image Sensor: 1/4” CMOS Number of Pixels (H x V): 1280 x 720 Minimum Illumination: 1.
70 Specifications Figure C-1 HD3MDIP/X Side View with D imensions Environme ntal Temperature: Operating: 14°F to 122°F (-1 0°C to 50°C) Storage: -4°F to 140°F (-20° C to 60°C) Relative Humidit.
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 Rev A 71 01/10 Figure C-2 HD3MDIP/X Side View Dimensions without Skirt Figure C-3 HD3MDIP/X Side View Dimensio ns with Adapter Plate Figure C-4 HD3MDIP/X Bottom View with Dimensions 4.5 ” (115.
72 Specifications.
Document 800-04132V1 Rev A 73 01/10 D Glossary AGC (Automatic Gai n Control) Video Amplifier in a camera that boosts the amount of video gain (including the n oise) to maintain a 1V p-p (1 -volt peak-to-peak) video signal output. It becomes operational when the light level is low.
74 Glossary PAL (Phase Alt ernate Line) A standard of specifications for television trans mission for color TV signal s used in West Germ any, England, Hollan d, Australia, and sever al other countries. It uses an interlaced format with 625 lin es per frame at 25 frames per second.
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 Rev A 75 01/10 Index A ActiveX control 39 administrator privileges 30 administrator password, default 33 AGC (Automatic Gain Control) 56 .
76 audio, alarm 19 CAT5 Ethernet 23 video monitor 23 customer servi ce 11 D DayToNight 56 declaration of conformance 11 default passwords 33 default gateway 36 defaults, restore factory 25 device conn.
HD3MDIP/X Network Came ra Reference Guide Document 800-04132V1 Rev A 77 01/10 M MAC address 36 , 37 , 51 manual white balance mode 57 manual, configuration, IP network 35 – 37 maximum bit rat e 53 m.
78 analytics tab 57 format 51 viewing live 47 video analytics 57 blinding threshold 60 blur threshold 59 camera blinding 60 field of view change 60 motion detection 61 sabotage detection sabotage dete.
.
Honeywell Secur ity Group (Head Of fice) 2700 Blankenbaker Pkwy, Suite 1 50 Louisville, KY 40299, USA www.honeywellvideo.com ℡ +1.800.796.2288 Honeywell Security Group Europe/Sout h Africa Aston Fields Road, Whitehouse Industrial Est ate Runcorn, Cheshire, WA7 3DL, UK www.
An important point after buying a device Honeywell HD3MDIP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Honeywell HD3MDIP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Honeywell HD3MDIP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Honeywell HD3MDIP you will learn all the available features of the product, as well as information on its operation. The information that you get Honeywell HD3MDIP will certainly help you make a decision on the purchase.
If you already are a holder of Honeywell HD3MDIP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Honeywell HD3MDIP.
However, one of the most important roles played by the user manual is to help in solving problems with Honeywell HD3MDIP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Honeywell HD3MDIP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
