Instruction/ maintenance manual of the product CT62A Honeywell
Go to page of 4
W ARNING This thermostat is a line voltage control (120 V olts to 240 V olts.) Do not install it if you are not completely familiar with house wiring. If handled improperly , there can be risk of a 120 V olt to 240 Volt electric shock hazard, which may cause serious injury or death.
4 WIRE AND MOUNT NEW THERMOST A T T urn the temperature setting knob to 65 ° F (18 ° C). This will prevent accidental damage to the knob stop during mounting. Remove thermostat cover by grasping the top and bottom ends with fingers, and pulling outward.
Symptom Checkout Action No heat. Make sure power is on at main service panel. Turn the temperature setting knob fully clockwise . Heater should start to warm up within two minutes. If not, contact qualified electrician to check thermostat and heater. Improper connections to thermostat.
Limited One-Y ear Warranty Honeywell warrants this product to be free from defects in the workmanship or materials, under normal use and service, for a period of one (1) year from the date of purchase by the consumer .
An important point after buying a device Honeywell CT62A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Honeywell CT62A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Honeywell CT62A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Honeywell CT62A you will learn all the available features of the product, as well as information on its operation. The information that you get Honeywell CT62A will certainly help you make a decision on the purchase.
If you already are a holder of Honeywell CT62A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Honeywell CT62A.
However, one of the most important roles played by the user manual is to help in solving problems with Honeywell CT62A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Honeywell CT62A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
