Instruction/ maintenance manual of the product 7120 Orbit Honeywell
Go to page of 44
7120 Orbit™ Presentation Las er Scanner User’s Guide.
Disclaimer Honeywell Int ernational Inc . (“HII”) res er ves the right t o m ake changes in specificati ons and other infor mation contai ned in this docu ment without prior notice, and the reader should in all cases cons ult HII to determine whether an y such changes hav e b een made.
T ABLE OF C ONTENTS Introductio n Product Overview ............................................................................................. 1 Scanner and Accessories ................................................................................
T ABLE OF C ONTENTS Applications and Protocols ................................................................................. 24 Scanner Conf i gur at ion ........................................................................................ 25 Configurati on Modes .
I NTRODUCTION Orb it ™ is an aggressiv e, omnidirect i onal laser bar code scanner i dea l for use in retail, conv eni ence, liquor a nd specialt y stores Designe d to be l ight weight and rugged, Orbit ’s small size mak es it ideal for app lications where counter spac e is limited.
I NTRODUCTION Scanner and Accessories B ASIC K IT C OMPONENTS Part No. Descr iption MS 7120 Orbit P resentation Las er Bar Code Scan ner 00 - 02282 x 7120 O r bit Presentatio n Las er Bar Code Sc anner User’s Guide 00 - 02407 x MetroS elect ™ Configur ati on G uide * Guides also av ailable for do w nload at www.
3 I NTRODUCTION Scanner and Accessories O PTIONAL A CCESSORIES Part No. Description MVC** RS485 Applications MVC Cable ±12VDC to +5.2VDC ** Contact a customer service repres entativ e for additional information on the MVC cable series and the host connectio ns available.
I NTRODUCTION Scanner Components I TEM N O D ESCRIPTION 1 White LED ( se e pag e 12 ) 2 Blue LED ( see page 12 ) 3 Red Output Wi ndo w (Laser Apert ur e) 4 Speaker ( see p age 12 ) 5 Pin Hole for Ca bl e R elease 6 10 - Pin RJ45, Fem al e Socket ( see pa ge 28 ) 7 Adjustable Sc an Head, 30 ° Figure 1.
I NTRODUCTION C aution and Serial Number Labels Figure 3. Labeling Locations on th e Bottom of the Scanner and Exa mple s Caution To maintain compliance with applicable standards, all circuits connected to the scanner must meet the requirements for SELV ( S afet y E xtra L ow V oltage) according to EN/IEC 60950 -1 .
Figure 5 Figure 7 Figure 6 Figure 8 I NTRODUCTION Mounting Specifications Optional Wall/Counte r Mount I tem Description Qty. Figure 4. Kit Components a. L ocking Plate , PN 50 - 50302 1 b. Base Cover , PN 50 - 50301 1 c. #7 x 1.00 " Wood Scre w, PN 18 - 18013 3 d.
I NSTALLATIO N RS232, Light Pen Emulation 1. Turn off the host device. 2. Plug the male 10 - pin RJ45 end of the PowerLi nk cable into th e 10 - pin socket o n t he 7120 . 3. Connect the 9 - pin f emale end of t he PowerLink ca bl e to the host devi c e.
I NSTALLATIO N RS485 1. Turn off the host de vice. 2. Plug the male 10 - pin RJ45 end of the MVC cable i nt o the 10 - pin socket o n t he 7120 . 3. Connect the ot her end of the MV C cable to the hos t device.
I NSTALLATIO N Keyboard Wedge 1. Turn off the host device. 2. Plug the male 10 - pin RJ45 end of t he PowerLink ca bl e into the 10 - pin socket on the 7120 . 3. Discon nect the keyboard from t he host device. 4. Connect the “ Y ” end of the Power Link cable to the ke yboard and the keyboard port on the host PC.
I NSTALLATIO N Stand- Alone Keyboard 1. Turn off the host device. 2. Plug the male 10 - pin RJ45 end of the PowerLi nk cable into th e 10 - pin socket o n t he 7120 . 3. Connect the ot her end of the PowerLink ca bl e to the keyboard port on the hos t device.
I NSTALLATIO N Full Speed USB 1. Turn off the host device. 2. Plug the male 10 - pi n RJ45 end of the USB cable int o the 10 - pin socket on the 7120 . 3. Plug the other end of the USB interface cabl e into the host device’s USB port. 4. Turn on the ho st device.
S CANNER O PERATION Audible Indicators When the 7120 i s i n oper ation, it pr ovides audible fe edback to ind ic ate the status of the scanner. Eight settings ar e available f or t he tone of the beep (n ormal, six alternate tones and no tone).
S CANNER O PERATION Visual Indicators The 7120 is equip ped with a blue a nd a white LED that indicate s t he s canner’s state and the status of t he current scan when the unit is i n o peration . Figure 14 . LED Location No LEDs The LEDs will not be illuminat ed if the scanner is not receivi ng power from the host or transfor mer.
S CANNER O PERATION Failure Mode Indicators Flashing Bl ue with One Razzberry Tone This indicates t hat the scanne r has experienced a las er subsystem fail ure.
S CANNER O PERATION Depth of Field Specifications* Normal Scan Zone Specificati ons are based on a 0. 33 mm (13 mil) bar co de. Figure 15. 7120 Normal Depth of Field Reduced Scan Zone Specificati ons are based on a 0. 33 mm (13 mil) bar co de. Figure 16.
S CANNER O PERATION Depth of Field by Bar Code Element Width* Normal Scan Zone M INIMUM B AR C ODE E LEMENT W IDTH A B C D E F G H J K mm .13 - - - .19 - .25 .33 - .66 mils 5.2 - - - 7.5 - 10 13 - 26 Figure 17. Normal Scan Zone by Bar Code Element Width * All specificat ions are subject to change witho ut notice.
S CANNER O PERATION Depth of Field by Bar Code Element Width* Reduced Scan Zone M INIMUM B AR C ODE E LEMENT W IDTH A B C D E F G H J K mm - .15 - - .19 - .25 .33 - .66 mils - 5.7 - - 7.5 - 10 13 - 26 Figure 18. Reduced Scan Zone by Bar Code Element Width * All specificat ions are subject to change witho ut notice.
T ROUBLESHOOTING G UIDE The follo wing guide is for ref erence purposes only. Contact a cust omer service representativ e to preserve th e limited warranty terms on pag e 33 . Symptoms Possible Cause(s) Solution All Interfaces During power up the unit beeps three times.
T ROUBLESHOOTING G UIDE Symptoms Possible Cause(s) Solution All Interfaces The unit po wers up but does not scan and/or beep. The unit is tr ying to scan a particul ar symbology that is not enabled. UPC/EAN, Co de 39, Interleav ed 2 of 5, Code 93, Code 1 28 and Codabar are e nab led by default .
T ROUBLESHOOTING G UIDE Symptoms Possible Cause(s) Solution All Interfaces Scanner beeps at some bar codes and NOT for others of t he same bar code symbology. The bar code m a y have been prin t ed incorrectly. Check if it is a chec k digit, character or b o rder problem.
T ROUBLESHOOTING G UIDE Symptoms Possible Cause(s) Solution RS232 Only The host is receivi ng data but the data do es not look correc t. The scanner a nd hos t may not be confi gur ed for the same in t erface. Check that the s c anner and the host are config ured for the sam e interface.
D ESIGN S PECIFICATIONS 7120 Operation al Light Source: V isible L aser D iode (VLD) @ 650 nm Laser Power: Less than 1 mW average Embedded Laser: Max Optical Power: 10 mW Wavelength: 650 nm Normal Depth of Field: 0 mm – 215 mm 0.33 mm (13 mi l) bar code Reduced Depth of Field: 0 mm – 190 mm Scan Speed: 1120 scan lines per second No.
D ESIGN S PECIFICATIONS 7120 Electrical Voltage Supply: 5VDC ± 0.25V Operating Power: 0.9 W Standby Power: 0.85 W Operating Current: 180 mA typical at 5VDC Standby Current: 170 mA typical at 5VDC DC Transformers: Class II; 5.2VDC @ 1A For regulator y c ompliance inf ormation , s ee pag es 30 - 32 .
A PPLICATIONS AND P ROTOCOLS The model number on each scanner i nc l udes the scan ner number and fa c t ory default commu nications prot ocol. S CANNER V ERSION I DENTIFIER C OMMUNIC ATION P ROTOCOL .
S CANNER C ONFIGURATION C ONFIGURATION M ODES The 7120* Ser ies scanner has three modes o f configurati on. • Bar Codes The 7120 can be conf igured b y scanning the bar cod es located in th e MetroSelect Configuration G uide. This manua l is available f or download at www.
U PGRADING THE F IRMWARE The Orbit 7 120 is part of Honeywell ’s line of scanner s with flash upgr a deable firmware. T he upgrade process r equires, a ne w firm ware file sup pli ed to the customer by a c ustomer servi c e r epresentativ e and Honeywell’s M etroSet 2 software .
S CANNER AND C ABL E T ERMINATIONS Scanner Pinout Connections The 7120 scanner int erfaces ter m i nat e to a 10 -p in m odular socket . The serial number label i ndicates the int erface enabled when the scanner i s s hipped from the factor y. Figure 19.
S CANNER AND C ABL E T ERMINATIONS Cable Connector Configurations (Host End) “Standard” Po werLink Cable PN 59- 59000 x - 3 straight Pin Fu nction 9-Pin D- Type Connector 1 Shield Ground 2 RS232 T.
S CANNER AND C ABL E T ERMINATIONS Cable Connector Configurations (Host End) Keyboard Wed ge P o werLink Cable PN 59-59 002 x -3 Pin Function 5- Pin DIN, Female 1 Keyboard Cloc k 2 Keyboard Dat a 3 No.
R EGULATORY C OM PLIANCE Safety ITE Equipme nt IEC 60950-1 Second Edition EN 60950-1 Second Edition Laser Laser Class 1: IEC 60825-1: Seco nd Edition, 2007 EN 60825-1: Second Edition, 200 7 LED IEC 62.
R EGULATORY C OM PLIANCE Attenzione L’utilizzo di sistemi di controll o, di regolazioni o di procedimenti diversi da quel li descritti nel presente Manuale può provocare delle esposizioni a raggi laser rischios e. Il cliente non deve assolutamente tentare di rip arare egli stesso lo scanner laser.
R EGULATORY C OM PLIANCE Attenzione Questo e’ un prodotto di c lasse A. S e usato in vici nanza di reside nze priv ate potrebbe causa re interferenz e radio che potreb be ro richiedere all ’ ut i l iz za tore opportun e mi sure. Attention Ce produit est de classe “A ”.
L IMITED W ARRANTY Honeywell International Inc. ("HII") warrants its products and optional acc essories to be free from defects in materials and workmans hip and to conform to HII’s published specifications applicabl e to the products purchased at the time of shipment.
I NDEX A AC .................................. see power accessories ............................... 2, 3 adapter .................................... 9 , 29 B bar code ...................................... 25 bar width ..............................
I NDEX R razz ............................. see indi cator repair ........................................... 34 RMA ............................................ 34 RS232 ........................ s ee interface RS485 ........................ s ee interface S safety .
C USTOMER S UP PORT Technical Assistance If you need assis tance install i n g or troublesh o oting your dev i ce, please cont act us by using one of t he methods belo w: Knowledg e Base: www.hsmkno wledgebase.com Our Knowledge B ase provides thousands of immedi ate solut ions .
.
.
.
Honeywell Scanning & Mobility 9680 Old Bailes Road Fort Mill, SC 29707 www.honeywellaidc.com 00-02282 Rev G 1/14.
An important point after buying a device Honeywell 7120 Orbit (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Honeywell 7120 Orbit yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Honeywell 7120 Orbit - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Honeywell 7120 Orbit you will learn all the available features of the product, as well as information on its operation. The information that you get Honeywell 7120 Orbit will certainly help you make a decision on the purchase.
If you already are a holder of Honeywell 7120 Orbit, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Honeywell 7120 Orbit.
However, one of the most important roles played by the user manual is to help in solving problems with Honeywell 7120 Orbit. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Honeywell 7120 Orbit along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
