Instruction/ maintenance manual of the product 4600rp Honeywell
Go to page of 20
4600g, 4600r, 4600rp, 4800i Quick Start Guide.
1 Note: Refer to your user’s guide for information about cleaning your device. For localized language vers ions of this document, go to www.honeywell.com/aidc. Getting Started Turn off computer’s powe r before connecting the scanner, then power up the computer once the scanner is fully connected.
2 Ke yboard W edge Connection Serial (RS-232) Connection.
3 Reading T echniques The view finder projects an aiming beam that should be centered over the barcode, but can be positioned in any direction for a good read. Hold the scanner over the barcode, pull the trigger, and center the aiming beam on the barcode.
4 Interface Scan the barcode that descr ibes the PC or interface you are using. AT/PS2 Keyboard Wedge (Default) RS-232 USB Keyboard (PC) Emulate External Keyboard Japan DOS/V USB Japanese Keyboard (PC.
5 Ke yboar d Country Scan the Program Keyboard Country barcode below, then scan the nu meric barcode(s) from page 10 , then the Save barcode to program the keyboard for your country. As a general rule, the following characters are not supported by the scanner for countries other than the United States: @ | $ # { } [ ] = / ‘ < > ~.
6 Tr i g g e r The following barcodes w ill allow you to use the reader in Manual Trigger mode (need to press the trigger to read) or Presen tation mode (the reader is activated when it “sees” a barcode). Streaming Presentation™ Note: Streaming Presentat ion Mode applies only to units with the Advanced Illumination feature.
7 Reread Delay This sets the time peri od before the scanner can read the same barcode a second time. Setting a reread delay protects against accidental rereads of the same barcode. Suffix If you want a carriage return after the barcode, scan the Add CR Suffix barcode .
8 Add Code ID Prefix to all Symbologies Scan the following barcode if you wish to add a Code ID prefix to all symbologies at once. Note: For a complete list of Code IDs, see the User’s Guide for your product at our website, www.
9 Data Format Editor Instructions The following are abbrevi ated instructions for entering a data format. For complete instructions refer to your User’s Guide, available at our website, www.honeywell.com/aidc. 1. Scan the Enter Data Format symbol. 2.
10 Programming Chart 0 2 1 4 3 5 6 7.
11 A B C D E F 9 8 Save.
12 Visual Xpress™ To obtain access to additional features for the imager, use Visual Xpress, available from our website at www.honeywell.com/aidc. For complete download instructions and descriptions of Visual Xpress features, refer to your User’s Guide.
13 Asia Pacific Telephone - Hong Kong: +852-3188-3485 or 2511-3050 Telephone - China: +86 21 6361 3818 E-mail: aptechsupport@honeywell.com Japan Telephone: +813 5770-6312 E-mail: aptechsupport@honeywell.com Malaysia Telephone: +603-6201-7020 E-mail: aptechsupport@honeywell.
14 North America Telephone: (800) 782-4263 Fax: (803) 835-8012 E-mail: naservice@honeywell.com Latin America Telephone: (803) 835-8000 Telephone: (800) 782-4263 Fax: (239) 263-9689 E-mail: laservice@honeywell.com Brazil Telephone: +55 (21) 3535-9100 Fax: +55 (21) 3535-9105 E-mail: brservice@honeywell.
15 Online Product Service and Repair Assistance You can also access product service and repair assistance online at www.honeywell.com/aidc . Limited W arranty Honeywell International Inc.
16 This warranty shall extend from the time of shipment for the duration published by Honeywell for the product at the time of purchase ("Warranty Period"). Any defective product must be returned (at purchaser’s expense) during the Warranty Period to Honeywell factory or authorized service center for inspection.
17 HONEYWELL’S RESPONSIBILITY AND PURCHASER’S EXCLUSIVE REMEDY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT WITH NEW OR REFURBISHED PARTS.
18 Disclaimer Honeywell International Inc. (“Honeywell”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader shou ld in all cases consult Honeywell to determine whether any such changes have been made.
Honeywell 700 Visions Drive P.O. Box 208 Skaneateles Falls, NY 13153-0208 2D-02-QS Rev D 10/08.
An important point after buying a device Honeywell 4600rp (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Honeywell 4600rp yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Honeywell 4600rp - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Honeywell 4600rp you will learn all the available features of the product, as well as information on its operation. The information that you get Honeywell 4600rp will certainly help you make a decision on the purchase.
If you already are a holder of Honeywell 4600rp, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Honeywell 4600rp.
However, one of the most important roles played by the user manual is to help in solving problems with Honeywell 4600rp. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Honeywell 4600rp along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
