Instruction/ maintenance manual of the product 3820 Honeywell
Go to page of 16
3820, 3820i, 4820, 4820i Cordless Imaging Systems Quick Start Guide CRDLSS-02-QS Rev F 1/12 Aller à www.honeywellaidc.com pour le français. Vai a www.honeywellaidc.com per l'italiano. Gehe zu www.honeywellaidc.com für Deutsch. Ir a www.honeywellaidc.
Note: Refer to your user’s guide fo r information about cleaning your device. For localized language versions of this document, go to www.honeywellaidc.com. Getting Started Turn off the computer’s power be fore connecting the base, then power up the computer once the base is fully connected.
USB Connection Ke yboard W edge Connection.
Serial (RS-232) Connection Reading T echniques The view finder projects an aiming beam that should be centered over the bar code. (T he 4820/4820i can be positioned in any direction for a good read. ) Hold the imager over the bar code, pull the trigger, and center the aiming beam on the bar code.
Note: If the imager beeps 3 times when scanning a bar code, the link has not been established. If t he imager beeps once, the link has been established.
PC Interface Scan the bar code that describes the PC or interface you are using. RS-232 USB Keyboard (PC) Japan DOS/V USB Japanese Keyboard (PC) Emulate External Keyboard AT/PS2 Keyboard Wedge (Defaul.
Ke yboard Country Scan the Program Keyboard Country bar code below, then scan the numeric bar code(s) from the back of this sheet, then the Save bar code to program the keyboard for your country.
Open Link Scan the Open Link bar code, then place the imager into the base to establish a link. Placing a different imager into the base establishes a new link and the old imager is unlinked.
Tr i g g e r The following bar codes will allow you to use the reader in Manual Trigger mode (need to press the tr igger to read) or Presentation mode (the reader is activated when it “sees” a bar code). Streaming Presentation™ (4820/4820i) Note: Streaming presentation mode applies only to units with advanced illumination.
Reread Delay This sets the time period be fore the imager can read the same bar code a second time. Setting a reread delay protects against accidental rereads of the same bar code. Suffix If you want a carriage return after the bar code, scan the Add CR Suffix bar code .
Add Code ID Prefix to all Symbologies Scan the following bar code if you wish to add a Code ID prefix to all symbologies at once. Note: For complete list of Code IDs, see the User’s Guide for your product at our website, www.
Data Format Editor Instructions The following are abbreviated instru ctions for entering a data format. For complete instructions refer to yo ur User’s Guide, available at our website, www.honeywellaidc.com. 1. Scan the Enter Data Format symbol. 2. Primary/Alternate Format: scan 0 for Primary Format 3.
Programming Chart 0 2 1 4 3 5 6 7 8.
A B C D E F 9 Save.
Visual Xpress™ To obtain access to additional fe atures for the imager, use Visual Xpress, available from our website at www.honeywellaidc.com. F o r complete download instructions and descriptions of Visual Xpress features, refer to your User’s Guide.
This document contains proprietary informa tion that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII. © 2008-2012 Honeywell International Inc.
An important point after buying a device Honeywell 3820 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Honeywell 3820 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Honeywell 3820 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Honeywell 3820 you will learn all the available features of the product, as well as information on its operation. The information that you get Honeywell 3820 will certainly help you make a decision on the purchase.
If you already are a holder of Honeywell 3820, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Honeywell 3820.
However, one of the most important roles played by the user manual is to help in solving problems with Honeywell 3820. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Honeywell 3820 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
