Instruction/ maintenance manual of the product Automobile Accessories Honda
Go to page of 12
© 2000 American Honda Motor Co., Inc - All Rights Reserved. All 21624 (0008) 1 of 12 INST ALLA TION INSTR UCTIONS 08E55-S84-1000-91 Accessory Application Publications No.
2 of 12 All 21624 (0008) © 2000 American Honda Motor Co., Inc - All Rights Reserved. Wire tie with clip 9 Long wire ties T OOLS AND SUPPLIES REQUIRED Small flat-tip screwdriver #2 Phillips screwdriver Ey e protection (face shield, saf ety goggles, etc.
© 2000 American Honda Motor Co., Inc - All Rights Reserved. All 21624 (0008) 3 of 12 Adjusting the Control Unit • Use a small flat-tip screwdriver to change the mode s witch and the hor n/siren switch and to adjust sensitivity .
4 of 12 All 21624 (0008) © 2000 American Honda Motor Co., Inc - All Rights Reserved. 5. Remov e the left fuse bo x cov er (three retaining clips and two tabs). 6. Remove the driver's dashboard lower cover (three screws, and five retaining clips).
© 2000 American Honda Motor Co., Inc - All Rights Reserved. All 21624 (0008) 5 of 12 10 . Remov e the passenger ’ s dashboard lo wer cov er (three screws and se ven retaining clips). 9. Remov e the right fuse box co ver (three retaining clips and two tabs).
6 of 12 All 21624 (0008) © 2000 American Honda Motor Co., Inc - All Rights Reserved. 13 . Measure and mark the upper steering column cov er . 16 . Locate the 2-pin connector included in the kit, and lower the lock. Firmly push the LED terminals into the 2-pin connector .
© 2000 American Honda Motor Co., Inc - All Rights Reserved. All 21624 (0008) 7 of 12 19 . Route the terminal ends of the disar m s witch through the hole you just drilled, and secure it with the washer and 12 mm nut from the kit. 20 . Locate the 3-pin connector included in the kit.
8 of 12 All 21624 (0008) © 2000 American Honda Motor Co., Inc - All Rights Reserved. 23 . Secure the disarm switch wire harness to the disar m s witch with one shor t wire tie, then attach the harness to the driver's dashboard lower cover with two halves of a cushion tape in the areas shown.
© 2000 American Honda Motor Co., Inc - All Rights Reserved. All 21624 (0008) 9 of 12 28 . Remov e the upper bolt that f astens the engine hood opener , and attach the ground terminal of the security system wire harness with the ground bolt from the kit.
10 of 12 All 21624 (0008) © 2000 American Honda Motor Co., Inc - All Rights Reserved. 33 . Remove the clip from the hole in the left knee bolster , use a utility knif e to cut the clip off of the v ehicle har ness. T ak e care not to damage the vehicle harness.
© 2000 American Honda Motor Co., Inc - All Rights Reserved. All 21624 (0008) 11 of 12 39 . Route the 2-pin connector of the LED through the low er steering column cover , and connect it to the 2-pin connector of the security system wire harness. Reinstall the lower and upper steering column covers.
12 of 12 All 21624 (0008) © 2000 American Honda Motor Co., Inc - All Rights Reserved. 49 . Check that all wire harnesses are routed properly and all connectors are plugged in. 43 . Plug the 3-pin connector of the security system wire harness into the 3-pin connector of the disarm s witch har ness.
An important point after buying a device Honda Automobile Accessories (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Honda Automobile Accessories yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Honda Automobile Accessories - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Honda Automobile Accessories you will learn all the available features of the product, as well as information on its operation. The information that you get Honda Automobile Accessories will certainly help you make a decision on the purchase.
If you already are a holder of Honda Automobile Accessories, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Honda Automobile Accessories.
However, one of the most important roles played by the user manual is to help in solving problems with Honda Automobile Accessories. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Honda Automobile Accessories along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
