Instruction/ maintenance manual of the product 08E02-SHJ-100B Honda
Go to page of 12
© 2008 American Honda Motor Co., Inc. - All Rights Reserved. AII 38137-38714 (0801) 1 of 12 08E02-SHJ-1B00-91 INSTALLATION INSTRUCTIONS Accessory Application Publications No.
2 of 12 AII 38137-38714 (0801) © 2008 American Honda Motor Co., Inc. - All Rights Reserved. 7518071E TOOL AND SUPPLIES REQUIRED #2 Phillips screwdriver 10 mm Combination wrench 10 mm and 14 mm Socket Pushpin Ratchet 3 mm, 4.5 mm, 6 mm, 9 mm, and 10 mm Drill bit Eye protection (face shield, safety goggles, etc.
© 2008 American Honda Motor Co., Inc. - All Rights Reserved. AII 38137-38714 (0801) 3 of 12 3. Disengage eight retaining tabs and remove left and right lens from the roof console. 7. Using a flat-tip screwdriver, push the hook and turn the holder. Remove the holder.
4 of 12 AII 38137-38714 (0801) © 2008 American Honda Motor Co., Inc. - All Rights Reserved. 7517042E 4301210B 1 3. Plug the HFL subharness 6-pin connector into the 6-pin opening in the fuse box. 1 2. Attach the fuse label (2 A) to the fuse case of the HFL subharness.
© 2008 American Honda Motor Co., Inc. - All Rights Reserved. AII 38137-38714 (0801) 5 of 12 7517051E 7517072E 7517031E NOTE: If another accessory is already plugged into the 6-pin connector, remove the dummy connector from the 6-pin connector taped to the HFL subharness.
6 of 12 AII 38137-38714 (0801) © 2008 American Honda Motor Co., Inc. - All Rights Reserved. 7517091E 7517101E 7517061E 2 3 . Cut the template into template A and template B.
© 2008 American Honda Motor Co., Inc. - All Rights Reserved. AII 38137-38714 (0801) 7 of 12 7517112E 7716020X 7523030E 27. Remove the console light from the roof console (four retaining tabs). CONSOLE LIGHT ROOF CONSOLE 4 RETAINING TABS 7524060E ROOF CONSOLE DRILL BIT (9 mm) 2 8.
8 of 12 AII 38137-38714 (0801) © 2008 American Honda Motor Co., Inc. - All Rights Reserved. 7517131E 7517141E 3 5. Attach template B with masking tape on the roof console at the indicated position. 34 . Drill 4.5 mm holes at the two locations marked on the roof console in step 32.
© 2008 American Honda Motor Co., Inc. - All Rights Reserved. AII 38137-38714 (0801) 9 of 12 7517152E 7517171E 7517161E 4 3. Remove the masking tape attached in step 29. 4 4. Using isopropyl alcohol on a shop towel, clean the areas where the double-faced tape will attach.
10 of 12 AII 38137-38714 (0801) © 2008 American Honda Motor Co., Inc. - All Rights Reserved. 791209AB 7517192E 4 8. Bend the switch terminal as shown.
© 2008 American Honda Motor Co., Inc. - All Rights Reserved. AII 38137-38714 (0801) 11 of 12 7518042E 2219080T 7518020E 5 5. Hold the roof console close to the roof console opening and connect the HFL harness 4-pin connector to the HFL subharness 4-pin connector.
12 of 12 AII 38137-38714 (0801) © 2008 American Honda Motor Co., Inc. - All Rights Reserved. 2219090T 61. Check that all wire harnesses are routed properly and that all connectors are plugged in. 62. Reinstall all removed parts. 63. Reconnect the negative cable to the battery.
An important point after buying a device Honda 08E02-SHJ-100B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Honda 08E02-SHJ-100B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Honda 08E02-SHJ-100B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Honda 08E02-SHJ-100B you will learn all the available features of the product, as well as information on its operation. The information that you get Honda 08E02-SHJ-100B will certainly help you make a decision on the purchase.
If you already are a holder of Honda 08E02-SHJ-100B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Honda 08E02-SHJ-100B.
However, one of the most important roles played by the user manual is to help in solving problems with Honda 08E02-SHJ-100B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Honda 08E02-SHJ-100B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
