Instruction/ maintenance manual of the product 2555.900 American Standard
Go to page of 3
TOWNSQUARE Cer tified to comply with ANSI A112.18.1M ROUGHING-IN DIMENSIONS Required T ools W rench (Supplied) T urn off hot and cold water supplies before beginning. CAUTION 1 2 Insert SPOUT SHANK (1) through center hole of MOUNTING LEDGE. Make sure that the RUBBER RING (2) is properly seated in RECESS at base of SPOUT (3).
10 3 5 5/16'' MIN. MOUNTING SURF ACE 11 11 10 11 1 3 Push TUBING (4) ends into VALVE (5) side outlets. Insert VALVES (5) into mounting holes from underside of ledge. Install LOCKNUTS (1) and RUBBER WASHERS (3) onto valve shanks. Place RUBBER RING (11) into DECK ADAPTERS (10) and thread onto valves until snug against internal stop.
Hex wench, supplied 8 To change direction of handle rotation, proceed as follows: Turn valve to OFF position. Pull out INDEX CAP (1) and remove HANDLE SCREW (2). Pull off HANDLE (3) and unscrew ESCUTCHEON BASE (4). Remove SPRING CLIP (6). Lift STOP WASHER (5), turn 90° and replace.
An important point after buying a device American Standard 2555.900 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought American Standard 2555.900 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data American Standard 2555.900 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, American Standard 2555.900 you will learn all the available features of the product, as well as information on its operation. The information that you get American Standard 2555.900 will certainly help you make a decision on the purchase.
If you already are a holder of American Standard 2555.900, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime American Standard 2555.900.
However, one of the most important roles played by the user manual is to help in solving problems with American Standard 2555.900. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device American Standard 2555.900 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center