Instruction/ maintenance manual of the product XL-FW208-06 Holland
Go to page of 4
ST A TIONAR Y K OMPENSA TOR ® XL-FW208-06 1 MAINTENANCE PROCEDURES NOTE: The maintenance procedures contained in this manual apply mainly to the Kompensator ® base subassembly portion of the fifth wheel assembly. Additional procedures beyond those discussed in this manual are required for the fifth wheel top plate.
All of the following must be performed after the initial 5,000 miles of service and then every 60,000 miles or 6 months, whichever comes first. Perform all inspections and adjustments after a thorough steam cleaning. NOTE: Severe service applications may require more frequent intervals.
Add shims ( ITEM 11 ) and/or new bearing plates ( ITEM 12 or ITEM 13 ) when this movement exceeds 0.060˝ ( 1 / 16 ˝). See Figures 3 through 6 . B. If shimming is required, shim as follows: 1. Remove shoes and disassemble Kompensator. See Figure 3 . 2.
* Bushings used in conjunction with FW8, FW35, FW2040, FW3540 or FW3640 series fifth wheels. ** Bushings used in conjunction with FW7040 series fifth wheels.
An important point after buying a device Holland XL-FW208-06 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Holland XL-FW208-06 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Holland XL-FW208-06 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Holland XL-FW208-06 you will learn all the available features of the product, as well as information on its operation. The information that you get Holland XL-FW208-06 will certainly help you make a decision on the purchase.
If you already are a holder of Holland XL-FW208-06, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Holland XL-FW208-06.
However, one of the most important roles played by the user manual is to help in solving problems with Holland XL-FW208-06. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Holland XL-FW208-06 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
