Instruction/ maintenance manual of the product XA-2081-OA Holland
Go to page of 5
8 XL-FW247-01 1 XA-2081-DA XA-2081-OA 2” SAE Kingpin (Rebuild Kit RK-65012) 3 1 ⁄ 2 ” SAE Kingpin (Rebuild Kit RK-65013) Tr oubleshooting and Rebuilding Procedures for XA-2081 SERIES Fifth Wheel.
7 GENERAL INFORMA TION 1. All fifth wheel maintenance, adjustment and rebuilding must be performed by a qualified person using proper tools and safe procedures. For more information, refer to HOLLAND publication FW -TE-14C, “Fifth Wheel Maintenance Procedures.
6 Uncoupling: To uncouple the lock tester , pull the secondar y lock release handle ( 9 ) out, raise it up and engage the handle lug with the top plate casting ( Figure 12 ). Then, pull the release handle ( 16 ) out and raise it up and engage its handle lug with the top plate casting ( Figure 13 ).
5 14. Secondary Lock Installation: A. Pre-install the secondar y lock ( 10 ) in the closed position in the casting. Do not install the spring, release handle or the secondary lock pin yet. Align the secondary lock pin holes. Rotate the secondary lock until it makes contact with the casting at point ( C ) as shown in Figure 9 .
ADJUSTING BLOCK PRE-INST ALLED ADJUSTMENT BLOCK .25 B 3/16 1/16 A PROCEDURES FOR INST ALLA TION OF SECONDARY LOCK ON MODELS ALREADY EQUIPPED WITH ADJUSTMENT BLOCK AS SHOWN IN FIGURE C , BELOW . THESE INSTRUCTIONS REPLACE THE “SECONDARY LOCK INST ALLA TION” SECTION IN THE A TT ACHED MANUAL.
An important point after buying a device Holland XA-2081-OA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Holland XA-2081-OA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Holland XA-2081-OA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Holland XA-2081-OA you will learn all the available features of the product, as well as information on its operation. The information that you get Holland XA-2081-OA will certainly help you make a decision on the purchase.
If you already are a holder of Holland XA-2081-OA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Holland XA-2081-OA.
However, one of the most important roles played by the user manual is to help in solving problems with Holland XA-2081-OA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Holland XA-2081-OA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
