Instruction/ maintenance manual of the product V2 Drum Hobie
Go to page of 4
1 Assembling the new Mirage Drive drums and cables Caution: The new cables and drums are sl otted for easier maintenance and tune ups. They are not inte rchangeable with the older parts. Warning: If cables are installed incorrect ly, they may twist off the drums, causing the Drive to fail.
2 link of chain with marking pen for easy placement). 2. Lightly grease drum axle Note: there are two methods of assembling the cables to the new drums -- on the bench (3 through 7 "A" below) or with the drive properly mounted in a bench vise (3 through 7 "B" below).
3 Vise method: 3 B. Secure Drive to vise by rear portion as shown. Use a rag in vise to prevent marks (rag removed for illustration purposes, right). 4 B. Mount both drum / crank arm assemblies to drum shaft, noting correct left and right side. 5 B. Mount the rear sprocket cable.
4 8. (both methods) Tighten and tune all cables. Make sure they are running properly on the drums ( below). Align and center fins as necessary. Troubleshooting: 1. Cable wanders off drum. Cable is twisted. Remount, removing twist or warping cable toward inboard side of drum.
An important point after buying a device Hobie V2 Drum (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobie V2 Drum yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobie V2 Drum - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobie V2 Drum you will learn all the available features of the product, as well as information on its operation. The information that you get Hobie V2 Drum will certainly help you make a decision on the purchase.
If you already are a holder of Hobie V2 Drum, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobie V2 Drum.
However, one of the most important roles played by the user manual is to help in solving problems with Hobie V2 Drum. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobie V2 Drum along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
