Instruction/ maintenance manual of the product Mirage Rudder Hobie
Go to page of 3
Steering and Control Line Replacement Kit Instructions for Mirage or Tandem Mirage Kit Contents. 2 steering control lines and tube assemblies, (labeled) 1 up control line and tube assem bly , (shortest, without swedged loop) 1 down control line and tube assembly.
5. Remove the steering handle by loosening setscrew from the steering crank. Connect the lines. With the crank in your left hand, point the shaft up at 45 degrees with the dimple on the bottom of the shaft 6. Install the left-hand steering line loop on to the lower steering crank post and the right han d line loop on the upper post.
Connecting the outside lines. 9. Take the down line (with the loop,) lay it over the rudder mount on the right side and through the bail on t he lower part of the rudder mount. Slide the #10 screw retained from disassembly through the loop and screw it into the hole at the bottom of the transom .
An important point after buying a device Hobie Mirage Rudder (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobie Mirage Rudder yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobie Mirage Rudder - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobie Mirage Rudder you will learn all the available features of the product, as well as information on its operation. The information that you get Hobie Mirage Rudder will certainly help you make a decision on the purchase.
If you already are a holder of Hobie Mirage Rudder, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobie Mirage Rudder.
However, one of the most important roles played by the user manual is to help in solving problems with Hobie Mirage Rudder. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobie Mirage Rudder along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
