Instruction/ maintenance manual of the product P660 Hobart
Go to page of 12
EXECUTIVE OFFICES 701 RIDGE AVENUE TROY, OHIO 45374-0001 FORM 23038 (12-95) P660 MIXER P660 MIXERS ML - 104605.
– 2 – Installation, Operation, and Care of P660 MIXERS SA VE THESE INSTRUCTIONS GENERAL The P660 model mixer is a heavy duty 60 quart mixer which is designed primarily for preparing dough, batter, and pastry.
– 3 – INST ALLA TION UNPACKING Immediately after unpacking the mixer, check for possible shipping damage. If this machine is found to be damaged after unpacking, save the packaging material and contact the carrier within 15 days of delivery.
– 4 – INSTALLATION CODES AND STANDARDS The installation of this appliance must be carried out by a licensed installer and in accordance with the applicable regulations, standards, codes of practice and related publications of the country of destination.
– 5 – Fig. 2 ELECTRO-MECHANICAL TIMER CONTROLS The START button is used to start the mixer. The STOP button is used to stop the mixer. The TIMER is used in conjunction with the START button for timed mixing operations and will stop the mixer when a preset time has elapsed.
– 6 – BOWL LIFT The Handwheel is used to raise and lower the bowl on mixers with the standard bowl lift. Turn the Handwheel clockwise to raise the bowl or counterclockwise to lower it. MIXING This section explains operation of the mixer and how to install bowls and agitators.
– 7 – Bowl Guard (Fig. 3) The Wire Cage Assembly on the Bowl Guard can be rotated out-of-the-way to add ingredients or access the bowl and agitator. To rotate the Wire Cage Assembly to the rear . . . Push the Latch in to release the Centering Pin from the Centering Ramp.
– 8 – Mixer Speed On P660 mixers equipped with single-speed gearing, all work is performed at that speed. Bowl Scraper Attachment The Mixer Bowl Scraper Attachment (when ordered) is provided with a separate instruction manual covering its installation, operation, use and care.
– 9 – Planetary Seal Occasionally, the planetary seal (Fig. 4) may become dry and begin to squeak. To correct this, work a little lubrication under the lip of the seal. Transmission The transmission oil should be even with the line on the Oil Level Gauge when the motor is NOT running.
– 10 – ADJUSTMENTS Agitator Clearance The agitator clearance should be checked with each bowl change. The agitator must not touch the bowl and the maximum clearance between the bottom of the bowl and the E or ED Dough Arm is 8mm ( 5 ⁄ 16 ").
– 11 – TROUBLESHOOTING SYMPTOMS POSSIBLE CAUSES Mixer will not start. 1. Circuit protector in open position — check fuse or disconnect switch. 2. Mixer or attachment overloaded. 3. Bowl not all the way up. 4. Wire Cage Assembly is not in the front-center position.
– 12 – FORM 23038 (12-95) PRINTED IN U.S.A..
An important point after buying a device Hobart P660 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart P660 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart P660 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart P660 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart P660 will certainly help you make a decision on the purchase.
If you already are a holder of Hobart P660, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart P660.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart P660. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart P660 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
