Instruction/ maintenance manual of the product ML-110301 FD3-150 ML-110305 FD3-200 ML-110309 FD3-300 Hobart
Go to page of 8
FORM 19307 Rev. B (9-97) INSTRUCTION MANUAL … with Replacement Par ts A product of HOBART CORPORATION 701 RIDGE AVENUE TROY, OHIO 45374-0001 MODELS FD3-150, FD3-200 & FD3-300 FOOD W ASTE DISPOSE.
– 2 – 1 2 3 7 9 6 5 4 10 12-13 14 THUR 17 18 19 20 21 31 36 37 38 39 8 11 33-34-35 32 30 29 28 27 26 25 24 23 22 PL-22349-1 DISPOSER UNIT.
– 3 – DISPOSER UNIT ILLUS. PART PL-22349-1 NO. NAME OF PART AMT. 1 SC-118-16 Cap Screw 1 ⁄ 4 -20 x 1 3 ⁄ 8 Hex Hd. .................................................................................................. 10 2 00-203185 Ring - Top Cone Clamp (Half) .
– 4 – Installation, Operation, and Care of MODELS FD3-150, FD3-200, & FD3-300 FOOD W ASTE DISPOSERS SA VE THESE INSTRUCTIONS GENERAL The disposer features removable hardened steel components and reversible rotation with grinding in both directions.
– 5 – For an accessory group D installation, use the mounting flange (1, Fig. 3) included with accessory group D. See Fig. 3 and the accessory group data sheet. Fig. 2 Fig. 3 WARNING : HAZARDOUS MOVING PARTS — DO NOT OPERATE DISPOSER UNTIL PROPERLY INSTALLED TO CONE.
– 6 – Water Connections Connect disposer (1, Fig. 5) from a 3 / 4 " IPS cold water supply line. Install the eight gallon per minute flow control supplied with the disposer (2, Fig. 5). If the water line pressure exceeds 60 psig, a pressure reducing valve (6, Fig.
– 7 – OPERA TION Before operating disposer make sure it is clear of foreign objects such as metal or wire clippings, screws, nails, etc., which may have dropped into it during installation. Check the flywheel for free rotation. WARNING : NEVER USE YOUR HAND TO CHECK ROTATION OF FLYWHEEL OR TO REMOVE FOREIGN MATTER FROM THE DISPOSER.
– 8 – CLEANING The food waste disposer should be kept in a clean and sanitary condition. Allow the disposer to run a few minutes after disposing of all food waste to completely flush out the interior. If food waste is allowed to accumulate due to improper clean-up, it will give off offensive odors.
An important point after buying a device Hobart ML-110301 FD3-150 ML-110305 FD3-200 ML-110309 FD3-300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart ML-110301 FD3-150 ML-110305 FD3-200 ML-110309 FD3-300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart ML-110301 FD3-150 ML-110305 FD3-200 ML-110309 FD3-300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart ML-110301 FD3-150 ML-110305 FD3-200 ML-110309 FD3-300 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart ML-110301 FD3-150 ML-110305 FD3-200 ML-110309 FD3-300 will certainly help you make a decision on the purchase.
If you already are a holder of Hobart ML-110301 FD3-150 ML-110305 FD3-200 ML-110309 FD3-300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart ML-110301 FD3-150 ML-110305 FD3-200 ML-110309 FD3-300.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart ML-110301 FD3-150 ML-110305 FD3-200 ML-110309 FD3-300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart ML-110301 FD3-150 ML-110305 FD3-200 ML-110309 FD3-300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
