Instruction/ maintenance manual of the product ML-104858 Hobart
Go to page of 8
N S T R U C T I O N S I A200 MIXER MODEL A200 ML-104859 (without Timer) ML-104858 (with Timer) ML-104863 (Deluxe Finish with Timer) ML-104861 (Floor Model with Timer) 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 937 332-3000 www.hobartcorp.com FORM 34387 (Feb.
– 2 – MODEL A200 MIXER.
– 3 – Installation, Operation, and Care of A200 MIXER SA VE THESE INSTRUCTIONS GENERAL The model A200 mixer is a 20 quart, bench-type mixer with a 1 / 2 H.P. motor, and a #12 attachment hub. With the use of special agitators, a 12 quart bowl may be used on the A200 mixers.
– 4 – OPERA TION WARNING : MOVING BEATER IN BOWL. KEEP HANDS, CLOTHING, AND UTENSILS OUT WHILE IN OPERATION, DO NOT USE WITHOUT INTERLOCKED GUARD. CONTROLS All models are furnished with an On-Off toggle switch which controls power to the mixer. The Bowl Guard must be in position or the mixer will not operate.
– 5 – Fig. 1 To Raise the Bowl While Mixing To raise the bowl while the agitator is mixing the product (when required by recipe or when using the Bowl Scraper Attachment): Load ingredients. Close Wire Cage Assembly. Select Low speed. To begin mixing, hold the On-Off switch in the up position; then raise the bowl.
– 6 – Bowl Guard (Fig. 2) The Wire Cage Assembly on the Bowl Guard can be rotated out-of-the-way to add ingredients or access the bowl and agitator. To rotate the Wire Cage Assembly to the rear . . . Rotate the Wire Cage Assembly to the left until it is positioned underneath the Splash Guard.
– 7 – CLEANING WARNING : UNPLUG MACHINE POWER CORD BEFORE BEGINNING ANY CLEANING PROCEDURE. The mixer should be thoroughly cleaned daily. Bowls and agitators should be removed from the mixer and cleaned in a sink. DO NOT use a hose to clean the mixer — it should be washed with a clean damp cloth.
– 8 – FORM 34387 (Feb. 2000) PRINTED IN U.S.A. SERVICE If service is needed on this equipment, contact your local Hobart Service Office..
An important point after buying a device Hobart ML-104858 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart ML-104858 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart ML-104858 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart ML-104858 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart ML-104858 will certainly help you make a decision on the purchase.
If you already are a holder of Hobart ML-104858, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart ML-104858.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart ML-104858. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart ML-104858 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
