Instruction/ maintenance manual of the product ML-104655 Hobart
Go to page of 8
I N S T R U C T I O N S FORM 33737 (10-96) MODEL 4352 MIXER-GRINDER MODEL 4352 ML-104650 R.H. Standard Hopper (Without Side Feed Opening) ML-104651 L.H. Standard Hopper (Without Side Feed Opening) ML-104654 R.H. Optional Hopper (With Side Feed Opening) ML-104655 L.
– 2 – © HOBART CORPORATION, 1996 Installation, Operation, and Care of MODEL 4352 MIXER-GRINDER SA VE THESE INSTRUCTIONS GENERAL The Model 4352 Mixer-Grinder is equipped with a 10 HP motor which rotates the mixing arm at 29 RPM and the worm at 222 RPM .
– 3 – LEGS OR CASTERS With the mixer-grinder securely elevated using the base frame for support, bolt the leg or caster assemblies through the corner holes using 5 / 8 " bolts and lockwashers, provided. LEVELING Adjust the feet (or caster legs) so the mixer-grinder is level, both front-to-back and side-to-side.
– 4 – ELECTRICAL CONNECTION WARNING : ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES. WARNING : DISCONNECT THE ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH INDICATING THAT YOU ARE WORKING ON THE CIRCUIT.
– 5 – INSTALLATION DIAGRAM.
– 6 – Fig. 3 OPERA TION CONTROLS (Fig. 2) START BUTTONS MIX — Starts rotating the mix arm. Use the Stop Button to stop mixing. MIX-GRIND — Starts rotating both mix arm and worm. Use the Stop Button to stop mixing and grinding. STOP BUTTON — Turns the mixer-grinder off.
– 7 – GRINDER ATTACHMENT The grinder attachment can easily be removed for cleaning (see Cleaning, page 8). Use the spanner wrench to loosen the adjusting ring and remove the adjusting ring, plate, knife, and worm (Fig. 3). Next loosen, but do not remove the two flange nuts, using the spanner wrench.
– 8 – CLEANING WARNING : DISCONNECT THE ELECTRICAL POWER SUPPLY BEFORE CLEANING OR SERVICING THIS MACHINE. In any cleaning operation after disconnecting the electrical power supply, seal the receptacle to prevent entrance of moisture.
An important point after buying a device Hobart ML-104655 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart ML-104655 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart ML-104655 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart ML-104655 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart ML-104655 will certainly help you make a decision on the purchase.
If you already are a holder of Hobart ML-104655, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart ML-104655.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart ML-104655. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart ML-104655 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
