Instruction/ maintenance manual of the product ML - 134374 Hobart
Go to page of 12
Model HS10 ML - 134374 ML - 134375 INSTRUCTION MANUAL FORM 37204 (Jan 2008) 701 S. RIDGE A VENUE, TROY , OHIO 45374-0001 937-332-3000 WWW .HOBARTCORP .
– 2 – 10 Quart MIXER.
– 3 – T ABLE OF CONTENTS GENERAL .................................................................................................4 INST ALLA TION .........................................................................................4 Unpacking .
– 4 – Installation, Operation, and Care of 10 Quart MIXER SA VE THESE INSTRUCTIONS GENERAL The 10 quart mixer has a DC electric motor and motor control. A 10 quart bowl, B-Flat beater , dough hook, and D wire whip are shipped as standard equipment.
– 5 – OPERA TION Moving beater in bowl. Keep hands, clothing, and utensils out while in opera- tion. Do not use without interlocked guard..
– 6 – CONTROLS (Fig. 2) Push-button Start and Stop buttons control power to the mixer . The Bowl Guard must be in place and closed or the mixer will not operate.
– 7 – MIXING This section explains operation of the mixer and how to install bowls and agitators. BOWL New mixer bowls and agitators (beaters, whips, dough arms and splash cover) should be thoroug.
– 8 – BOWL GUARD Bowl guard must be in position and closed in order to mix. If bowl guard is opened during the mixing, mixer will stop. REMOVE BOWL GUARD Lower the bowl support and remove agitator before removing bowl guard. Hold bowl guard with both hands and pull downward gently to release bowl guard from retainer (Fig.
– 9 – MIXING BOWL CAP ACITY CHART Capacity of Bowl (Qts. Liquid) Agitators Suitable for Operation 10-Quart Model HS10 Motor (HP) 1/2 Overall Space Required (Bench Space) 13 21/32 X 17 9/32 X 25 5/8 Kitchen Materials Capacity Chart (Finished Materials) Egg Whites (pt.
– 10 – AGIT A TORS AND ACCESSORIES B FLA T BEA TER D WIRE WHIP ED DOUGH ARM INGREDIENT CHUTE MAINTENANCE Unplug machine power cord before beginning any maintenance procedure. MOTOR The motor has sealed ball bearings which require no lubrication maintenance.
– 1 1 – SER VICE If service is needed on this equipment, contact your local Hobart Service Of fi ce..
– 12 – FORM 37204 (Jan 2008).
An important point after buying a device Hobart ML - 134374 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart ML - 134374 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart ML - 134374 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart ML - 134374 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart ML - 134374 will certainly help you make a decision on the purchase.
If you already are a holder of Hobart ML - 134374, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart ML - 134374.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart ML - 134374. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart ML - 134374 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
