Instruction/ maintenance manual of the product ML - 104481 Hobart
Go to page of 12
701 S. RIDGE AVENUE TROY, OHIO 45374-0001 937 332-3000 www.hobartcorp.com I N S T R U C T I O N S FORM 18815 Rev. A (12-99) D330 MIXER D330 MIXERS ML - 104481.
– 2 – © HOBART CORPORATION, 1994 MODEL D330 MIXER.
– 3 – Installation, Operation, and Care of MODEL D330 MIXERS SA VE THESE INSTRUCTIONS GENERAL The D330 Mixer is a medium duty 30 quart mixer which develops 1 1 / 4 horsepower and features a timer, thermal overload protection, and a #12 attachment hub as standard equipment.
– 4 – ELECTRICAL CONNECTION WARNING : ELECTRICAL AND GROUNDING CONNECTION MUST COMPLY WITH THE APPLICABLE PORTION OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES. WARNING : DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH INDICATING THAT YOU ARE WORKING ON THE CIRCUIT.
– 5 – Start Button Stop Button Timer Gear Shift Lever PL-40142-1 PL-40174-1 Controls Bowl Lift Handle Apron Bowl Handle Bowl Clamp Bowl Support Attachment Hub Bowl Guard Agitator Bowl Drip Cup Ali.
– 6 – PROGRAMMABLE TIMER CONTROLLER (when equipped) At Idle, the timer display [ – – : – – ] shows that no time has been set (Fig. 4). Fig. 4 Timer Keys Programming Function (if the mixer is not mixing). P1 Contains up to four preset times.
– 7 – PROGRAMMABLE TIMER CONTROLLER (when equipped) continued Using the Preset Keys, P1 or P2, to set the Mixing Time . . . Each preset key has four time settings. The indicator above the number 1, 2, 3, or 4 and the P1 or P2 indicator light identify which preset time is being displayed.
– 8 – PROGRAMMABLE TIMER CONTROLLER (when equipped) continued To Revise the Preset Mixing Times contained in P1 or P2 . . . Each preset key has four preset time settings. The indicator above the number 1, 2, 3, or 4 and the P1 or P2 indicator light identify which preset time is being displayed.
– 9 – CHANGING SPEEDS The GEAR SHIFT LEVER is used to change speeds. Always stop the mixer before changing speeds. To change speeds, push the STOP button, move the gear shift lever to the desired speed, and restart the mixer by pushing the START button.
– 10 – PL-40071-1 Wire Cage Rotated Left Latch Ridge On Drip Cup Rear Retainer Splash Guard Wire Cage Front-Center Position Front-Center Retainer Centering Ramp Black Release Knob Centering Pin Bowl Guard (Fig. 5) The Wire Cage Assembly on the Bowl Guard can be rotated out-of-the-way to add ingredients or access the bowl and agitator.
– 11 – Attachments To install an attachment, loosen the attachment hub thumb screw and remove the plug. Insert the attachment into the attachment hub, making certain that the square shank of the attachment is in the square driver of the mixer. Secure the attachment by tightening the thumb screw.
– 12 – PL-40172-1 Bowl Lift Slideways FORM 18815 Rev. A (12-99) PRINTED IN U.S.A. SERVICE If service is needed on this equipment, contact your local Hobart Service Office. Bowl Lift The bowl lift mechanism should be lubricated twice a year. Remove the screw and access cover from the rear of the pedestal.
An important point after buying a device Hobart ML - 104481 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart ML - 104481 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart ML - 104481 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart ML - 104481 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart ML - 104481 will certainly help you make a decision on the purchase.
If you already are a holder of Hobart ML - 104481, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart ML - 104481.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart ML - 104481. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart ML - 104481 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
